Home Improvement By DURATECH

• Shower Valve Socket Wrench Set: The Set comes with five double end wrenches, bar handle and a bar wire holder for easy storage. The hex-shaped bodies allow for use with an adjustable wrench. There is also a hole near each end of the wrench for turning with a long screwdriver.
• Common Size: This shower valve socket set has 5 pieces of socket with bar handle. Each 125 mm socket has been designed with different sizes helping in quick and easy wrench selection. The socket sizes are 21/32x 27/32, 29/32x 31/32, 1-1/32 x1-3/32, 1-5/32x1-9/32, 1-11/32x 1-7/16\". The diameter of handle is 9mm. Tips: please make sure that the wrench size is compatible with your shower valve before purchasing.
• Durable Steel Construction: Made of long lasting durable solid steel and the surface is nickel-plated. 5pcs socket set and afterburner rod are connected with a stainless steel wire.
• Easy To Use: First, Turn off water supply. Next, Remove faucet handle cap, screw and handle, exposes valve stem and its packing nut. And then, Place correct and of wrench over valve stem onto packing nut, insert handle into opposite side of wrench. At last, Turn clockwise to tighten nut.
• Which You Need: These plumbing socket wrench set is perfect for removing and installing tub and shower valves, fittings and nuts.

• Easily loosen corroded screws, rusted body panel fasteners or frozen bolts with the DURATECH 3/8\" manual impact driver set. This unique tool converts hammer blows into powerful high-torque forces that can release even the most stubborn fasteners.
• When you hit the top of the tool with a hammer, the drive handle turns 20 degrees in the direction you have set the tool. This twisting action, combined with your hammering, is usually enough to loosen the screw without causing any serious damage.
• Dual-action reverse impact screwdriver tool allows you to adjust towards the right to tighten screws or towards the left to loosen a screw; Single letter engravings, L? and R?, on handle ensure easy identification.
• This set includes 1 - 3/8-inch impact driver, 1 - 3/8-inch Bit Adapter, 2 - Flat Bits (5/16 and 3/8), 2 - Phillips bits (#2 and #3), and 1 - storage case. With a non-slip knurled grip, the bits have precision-milled tips for exact fit.
• It's small and lightweight and doesn't require any air or power source, so you can use it in the garage, or take it to the road to quickly remove parts that have long been exposed to the elements.

• Interchangeable blades with a rust-resistant, chrome finish maximize tool versatility.
• All-metal, high-torque ratchet collar provides greater durability and faster drive speeds. Ratchet direction can be set to forward, fixed and reverse for easy operation.
• Reversible stainless steel shaft with spring-loaded ball bearings locks bit in place
• The shaft can release double-ended bits in a compact design for greater convenience and space savings
• Includes #1 and #2 phillips, 1/4 in. and 3/16 in. slotted, 1/4 in. and 5/16 in. nut driver

• This multi-bit screwdriver set allows for one-handed driving with one tool in 36 sizes.Excellent all-in-one hand tool for home repairs
• Internal Magnetic Device- The stainless steel bit holder has an internal magnetic device that provides strong magnetism to tighten the bit, and the magnetically-conducted bit can pick up loose screws and collect metal debris.
• The screwdriver blade can be removed to adjust the length of the screwdriver to easily access tight areas for ease of use
• 3-Mode Ratchet Mechanism- All-metal, high-torque ratchet collar provides greater durability and faster drive speeds. Ratchet direction can be set to forward, fixed and reverse for easy operation.
• The handle can store 5pc bits for easy access; the curved handle provides excellent torque and maximum comfort.
• Storage bag comes with belt buckle for easy storage of tools and hands free when working
• Included 36-piece Bits- Slotted: 1/8, 3/16*2, 1/4, 9/32; Phillips: PH0, PH1, PH2*2, PH3; Pozi: PZ1*2, PZ2*3; Torx: T10, T15, T20, T25, T30; Hex : H3/32, H1/8, H5/32, H3/16, H1/4; Square: S0, S1, S2*2, S3; Handle bits: Ph1, PH2, Ph3, 3/16,1/4; One bit on Screwdriver: PH2.

• Compact Design - The multi-bit screwdriver holds a retractable shaft that quickly and easily converts into a T-bar handle or a precision screwdriver.
• Strong Holding Power - The bit fits perfectly with the shaft, providing a firm holding power to prevent the bit from falling out.
• Curved handle made of dual material provides excellent torque and maximum comfort
• Perfect all-in-one tool - The screwdriver set is suitable for professional repair as well as home repair work, and can be used to repair small parts, watches, glasses, electronics.
• Includes 16PC S2-steel Bits - #1, #2, #3, #0, #00 and #000 Phillips, 1/4-Inch, 3/16-Inch 9/32-Inch, 1/16-Inch, 3/32-Inch and 1/8-Inch Slotted, T10 and T15 Torx, and 3/16-Inch and 1/4-Inch square

• ?PREMIUM MATERIALSBits are made of heat-treated S2 steel that stands up to the toughest bolts and fasteners, anti-rush and corrosion resistant, tougher than most carbon steel in order to reduce wear-outs and stripping
• ?ERGONOMIC DESIGNNon-slip T-handle design allows for greater leverage, increasing your torque strength with continual safety. Equipped with an Oxford cloth tool bag, easy to carry and prevent loss, you can effectively organize the bits and screwdriver
• ?3 DRIVER SETTINGSConvenient switch for clockwise, counter-clockwise ratcheting, and locked position, help you to control ratcheting screwdriver set direction, rapidly fasten and loosen fasteners without having to make full handle rotations
• ?WIDELY APPLICATION14-Piece quick load T-handle ratcheting screwdriver set, that is designed to serve DIY, workshop, outdoors, and home use
• ?SET INCLUDESPhillips: PH0, PH1, PH2, PH3; Slotted: 3/16, 1/4 in; Torx: T10, T15, T20, T25; Square S0, S1, S2, S3, 1x Storage bag, 1x T-handle ratcheting screwdriver

• High-strength S2 steel shaft reduces wear and spalling, and the tip is coated with a rust-resistant chrome finish to provide durability and longevity.
• The precision screwdriver comes with 3 ratchet switching modes that can be adjusted by the ratchet setting for clockwise and counterclockwise. This design makes repair work easier.
• 360 degree rotating end cap maintains constant finger pressure, effectively improving work efficiency and saving time and effort. Ergonomic anti-slip handle is made of TPR environmental protection plastic, anti-slip and wear-resistant.
• Demagnetizer/Magnetizer can flexibly adjust the magnetism of the screwdriver tip.
• Set includes 6 pieces of fine screwdrivers: Phillips #0, #00, #000; Slotted 2.0mm, 2.4mm,3.0mm.

• EXCELLENT MATERIAL The engineer tape measure is made of high quality thickened carbon steel and wrapped with nylon coated for maximum durability. It's stiff enough to feed out 7 ft easily without bending. The shell is made of ABS high hardness plastic and TPR elastic rubber, which is wear-resistant and drop-proof.
• MAGNETIC HOOK The end of the measuring ruler tape is outfitted with powerful magnets. Those magnets are strong enough to grip any metal surface effortlessly. The fractional double-sided tape measure makes it easier to take single-person measurements even over long distances.
• LOCKING MECHANISM Secure sliding Thumb lock makes locking a natural movement. The retractable tape measure slides up and down to releases and locks with ease , which is a style of locking that very reliable.
• ZERO POINT CORRECTION HOOK Sliding hooks are used for precise inside and outside measurement, so measurement uncertainty can be tightly controlled. The magnetic claw can move back itself to deduct its own thickness when conducting inside measurement.
• MAKE MEASURING EASY The 2 pack easy read tape measure with metal buckle design and portable hanging lanyard is perfect for indoor and outdoor measurements. Easy to read fractional marks, feet marks,triangle markings every 19.2\" make DURATECH tape measure a perfect tool for engineer, builders, carpenters and more.

• EXCELLENT MATERIAL The engineer tape measure is made of high quality thickened carbon steel and wrapped with nylon coated for maximum durability. It's stiff enough to feed out 7 ft easily without bending. The shell is made of ABS high hardness plastic and TPR elastic rubber, which is wear-resistant and drop-proof.
• MAGNETIC HOOK The end of the measuring ruler tape is outfitted with powerful magnets. Those magnets are strong enough to grip any metal surface effortlessly. The fractional double-sided tape measure makes it easier to take single-person measurements even over long distances.
• LOCKING MECHANISM Secure sliding Thumb lock makes locking a natural movement. The retractable tape measure slides up and down to releases and locks with ease , which is a style of locking that very reliable.
• ZERO POINT CORRECTION HOOK Sliding hooks are used for precise inside and outside measurement, so measurement uncertainty can be tightly controlled. The magnetic claw can move back itself to deduct its own thickness when conducting inside measurement.
• MAKE MEASURING EASY The easy read tape measure with metal buckle design and portable hanging lanyard is perfect for indoor and outdoor measurements. 1\" blade width, easy to read 1/8 inch fractional marks, feet marks,triangle markings every 19.2\" make DURATECH tape measure a perfect tool for engineer, builders, carpenters and more.

• OFFSET 25 degree TO CREATE CLEARANCE Both box ends of the ratchet wrench with offset design, large tilt angle for more convenient use in confined spaces.
• RATCHETING The ratchet gears arc convient for access in tight spaces. 12 point box end for quick engagement with fastener and prevent round-off. Allows you to complete work quickly, greatly improving work efficiency.Top-quality hand tools for every repair project.
• DOUBLE ENDED REVERSIBLE DESIGN Each end of box end ratchet wrench both has a reversing lever, allows you to turn fasteners in reverse without removing the wrench. 12-point ratchet gear, suitable for hexagon nuts, 12-point nuts or other shapes of nuts.
• HIGH QUALITY & RELIABILITY Reversible Ratchet wrench set, manufactured with high quality steel and sandblasting finish, surface chrome-plated for rust resistance. And the body is fixed by 4 rivets, strong fixed without falling off.The reversible ratcheting wrench is heavier than ordinary wrenches which will be more stable and provide greater torque when in use.
• EASY TO CARRY Specification: A storage bag + 5 Pieces reversible ratchet wrench. Multiple Sizes(METRIC): 6mm, 8mm, 10mm, 12mm, 13mm, 14mm, 15mm, 17mm, 19mm, 21mm. Size conveniently stamped on both ends of the beam for quick identification. Suitable for most nut sizes to meet your needs.

• High-Strength Materials Professional forged CR-V Steel, heat-treated, provides high strength and durability. Chrome plated for rust resistance, with high hardness and wear resistance.
• 3-in-1 Adjustable Wrench In addition to the main function of adjustable wrench, we also added two hexagonal holes of different sizes in the middle and a Box End, provide more convenience for users.
• Laser Marking With High Precision SAE & Metric scales are engraved on the front and back of wrench by laser marking, high accurate scale allows for exact fastener fit. Mirror polish for the head of wrench, make the surface scale clearer, convenient to work.
• Non-slip Grip/Flexible Adjusting Knob Our adjustable wrench with dual material, provides high torque and comfort and is slip resistant. Adjustable screw gears designed for smooth adjustment.
• Good choice The 6-inch adjustable wrench, 1-1/32\" Max Jaw Opening, and the perfect combination of handle with 6\"(152mm) length to complete work in various applications.

• Set Includes 11-Piece 3/8\" drive shallow universal impact socket set (metric): 8mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm.
• Durable and Sturdy DURATECH swivel socket set is manufactured from premium impact-grade chrome molybdenum steel which can withstand extreme torque variations in fasteners and provide excellent resistance to corrosion and high temperatures.
• Full 360 degreeRotation The universal socket features a flexible swivel head design that allows full 360 degree free rotation, making it easy to get into tight spaces and odd angles.
• Widely Used This swivel socket set is perfect for mechanics and automotive technicians for brake jobs, suspension work, and machine repair work. It will be a great help when installing awkward bolts in your car, truck, and motorcycle maintenance.
• Orgnized and Secure Comes with a heavy-duty storage case, quality sponges, and anti-rust paper, all of these wobble sockets will be well organized and securely protected, without the worry of lost and broken sockets.

• Durable: The magnetic socket organizer is made of high quality silicone, which is rust proof and sturdy enough to resist scratching. It can withstand chemicals like gasoline or extreme temperature(-9.4-122). They will not be melting in hot weather or frozen in cold environment.
• High Visibility and Large Capacity: The socket size is clearly marked and easy to identify. Magnetic socket organizer can hold up to 52 pieces standard size and deep size sockets(Include 2-piece 1/4\" Drive SAE&Metric socket organizer trays)
• Keep Organized: ?Socket holders make the tools well organized in tool box drawer according to the socket size, which saves much time on finding sockets. The socket holder can also be mounted on the side of the tool cart. It is convenient to pick or place the sockets at any time.
• Prevent Scratching: The rubberized surface of socket organizer will not scratch any steel surface of sockets. Moreover, the top surface of socket organizer tray is carbon fiber texture. It is not easy to leave scratches even after long-term use.
• Premium Magnetic Stripe: The strong magnetic helps mount the socket organizer on ferrous surface such as tool cart. Edge wrapping design protects magnetic strip from breaking off.

• Reliable CR-V steel with heat treated process for exceptional durability and drop-forged for long lifespan. Complete chrome plating, ensures durability and corrosion resistance.
• 40 degree working angle can rotate in 360 degrees, letting you easily reach fasteners in tight spots. 12-point design offers a firmer grip than the traditional 6-point, effectively preventing fastener from rounding.
• This swivel socket set can be attached to 3/8\" dirve extension bar. And its size covers 10-19mm, without skip size, providing you with more flexibility for hard to reach bolts.
• With these universal socket joints on hand, you are able to deal with the bolts that are buried deep within engine bays. It is your great problem-solver for placed awkwardly bolts.
• Comes with an EVA foam tool organizer for convenient storage. Keeping all these swivel sockets in place for easy carry and take out, without worrying about socket missing.

Popular Categories on BuyBestBrands.in