Home Improvement By FC-6S

• FTTH Fiber Optic Tool Kit Set Include Cable VFL OPM Cleaver Adapter PP Bottle Clean Paper Stripper Tools Bag.Easy to use,compact, economical.
• FC-6S optical fiber cable cleaver is available with a single fiber dapter for 2FC-6S optical fiber cleaver is available with a single fiber adapter for 250 to 900 micron coated single fibers It is a simple peration for the user to remove or install the single fiber adapter and alternate between mass and single fiber cleaving50 to 900 micron coated single fibers It is a simple operation for the user to remove or install the single fiber adapter and alternate between mass and single fiber cleaving
• The quickly cold connector tools set is a multi-purpose toolkit it can provides the tools necessary for the assembly of mechanical splices and it will bring you a higher working efficiency 1mW Visual Fault Locator Fiber Optic Cable Tester Meter
• Optical Power Meter Test Rang -70~+10 dBm; with FC and SC Adapter ;Test wave:850/980/1300/1310/1490/1550/1625nm
• Visual Fault Locator VFL with 2.5mm universal connector of the detector is compatibly designed for ST, SC, FC interferes both in circle and square shape of different fiber optic cables.Test for both single-mode and multi-mode cables.

• The versatile handheld ethernet network cable tester. Multifunction Wire tracker?The Line Finder can trace not only Ethernet LAN wires, but also electrical and speaker wires when connecting to the alligator clip; In this situation, the wires must be in power-off status, otherwise the units will be damaged; It is recommended to stripe down some of the wires when connecting through the clip; Select \"SCAN\"; Emitter works properly if the \"SCAN\" indicator is on; Use the receiver to find target wires.
• Telephone network Line test : The Line Finder testes physical connection status of network cable, such as open circuit, short connection, miswire and reverse connection; Use the emitter to test the status of working of telephone lines (such as judging TIP or RING line), test the line level, positive and negative polarity detection; Adjust the volume of receiver by pressing the volume rotary knob.
• Wire tracking multifunction?Find wire on all types of connected operating Ethernet switch RouterPC terminal. Perfect for tracking RJ11, RJ45, cables or other metal wire (via adapter)?Fast to locate the breakpoint without wire's cover damage?And also with the Battery?10V-110V? positive and negative measurements function.
• Earphones designing: With a pair of Earphone, you can just connect the earphone to the headset jack of receive to get clear information in a noise environment, Adjust the volume knob to make the volume proper and avoid being interfered. Notice that if the sound is low, you should check whether the battery is powered off or not, and the LED flashlight allows operation in dark situation.
• You will get: 1x Receiver with BNC interface,1x Emitter with double RJ11 RJ45 interface, 1x RJ45 Cable,1x RJ11 Clip Adapter Cable,1x Pair of Earphone ,1x Case, 1x English User Manual , Without Battery .

Popular Categories on BuyBestBrands.in