Home Improvement By FLAWISH

• Includes 6, 8 and 10mm guides, allowing joint to be filled with a dowel.
• Creates Holes At A 15

• Size: Approx. 7.5x 5x 5cm/ 2.95x 1.97x 1.97inch

• Cut the thickness of the thin leather edge without worrying about cutting too deep.
• The blade cutter is thin and sharp, preventing excessive leather cutting, usually used as the edge of leather scraping, skilled use and maintaining a certain angle.
• The thinness of the cut can also guarantee a certain thickness, work more efficiently and accurately.
• Easy to tear leather, convenient and safe.
• The thinning knife itself has a blade installed and three additional

• Easy And Convenient Woodworking Chisel Electric Machine Tool with 5 and 1 Spanner
• One third of the force can be hand-carved, speed 3-5 times for , without fatigue.
• Each with five special chisel tip with a small wrench; Can not be used singly, should be used with electric tools, such as hanging grinding machine,small grinding machine, electric drill flexible shaft. And the rotate speed must lower than 12000.
• In addition to general timber, but also can be carved ebony, soft plastics, Mainly used for wood, furniture , antique floor , bonsai, toys, figures, animals and other sculpture works.
• is solid, excellent thermal efficiency, very safe

• Ends with female 1/2 inch adapter on one end and a 1/4 inch female hex-adapter on other end
• Made with steel for durability and the ability to withstand the high shock of impact drivers
• Convert any air or power impact wrench into a drill or ratcheting wrench into a driver with this single piece chuck converter
• Quick-release mechanism allows for easy, one-handed swapping between bits while working
• Adapter securely holds any 1/4\" hex-shank bit; Eliminates the need for expensive driver sockets

• 4 piece set includes bits for drilling holes for screw sizes
• The applicable scope is suitable for workpiece under 25 HRC hardness, such as carbon steel, sheet iron, insulation board, PVC board, wood, etc.
• Adjustable counter sleeve depth with Allen wrench,drilling length can be adjusted for various length screws simply by loosening and tightening the setscrew
• The chamfering is five-edged, and in the course of the process, the sawdust can be discharged more quickly, and a smooth and smooth counterbore is drilled at one time to insert the screw cap into the surface of the workpiece.
• Standard round shank is quick change compatible,drill and countersink for wood screws without changing bits.

Popular Categories on BuyBestBrands.in