Home Improvement By KWODE

• Shower Elbow Extender:135 degree elbow extender offer a suitable angle for wall -hung shower.
• Strong and Sturdy:made of solid brass,thick tube wall,industrial grade chrome polished,anti-oxidation and corrosion resistance, easy to clean, strong load-bearing capacity.
• Humanized design: not only provides a proper angle for the shower head, but also does not reduce the flow and pressure of the shower head. After installation, the shower head can be rotated to achieve the best practical effect.
• General Specifications: 1/2\" IPS (G1/2) female and male, adapters most standard shower system-shower base, shower arm, shower head and hose
• Easy Installation: Equipped with O-shaped washer, put it in the internal thread and tighten it.

• General Compatibility 1/2 NPSM Outlet size and 1/2 NPT Inlet size,compatible with all wall mounted commercial faucets & stainless steel kitchen sinks.
• Space Saving: This angle part is designed for place saving, you can just reserve 1.5 inch space behind the sink for the assembly
• High-Quality Materials Lead free brass material, heavy duty design. Wear-resistant, corrosion-resistant, anti-oxidation, long-term use will not pollute the water quality, and it can provide reliable service for your life
• EASY TO INSTAL Connect the longer end to the back of wall mount faucet, the shorter end to water line, agonist washes at the back of Stainless Steel sink by lock nuts to secure faucet.(Tips: If the faucet interface does not have an O-type gasket, it is necessary to wind the water tape around the male thread to prevent leakage. If the faucet interface has an O-type gasket, the water tape is not required)

• Installation specification:Practical Adjustable Center Design: G1/2\" NPT female inlets, 2 holes wall mount installation with 7 1/2 -8 1/2 inches between hole center??hole center distance can be adjusted according to the actual distance of installation.If you need spouts of other sizes, you can search for \"B0819CXN9B\", \"B0819CW17M\", \"B0819D1QV2\" to find 10-inch, 12-inch, and 14-inch spouts, respectively.
• Scientific design:Spout is equipped with a Swiss Neoperl Aerator, the water is soft, does not splash, the daily water flow is 2.2GPM, The commercial kitchen wall-mounted faucet features a 12-inch Swivel Spout that can be rotated 360 degrees, making it easy to move Spout over other sinks
• Easy to install:No additional accessories or materials are required and can be installed directly. According to the installation process of our manual, you can install it.Complete installation of this commercial kitchen wall faucet in less than 15 minutes
• Safe and durable:Lead-free brass, surface-polished chrome-plated, one-time compression forming filter for outstanding durability in commercial kitchen wall-mounted faucets.very suitable for use in commercial kitchen, Baking house,Restaurant,Cafe,Garden, countyard, Laundry Restroom, etc.

• Installation specification:Practical Adjustable Center Design: G1/2\" NPT female inlets, 2 holes wall mount installation with 7 1/2 -8 1/2 inches between hole center??hole center distance can be adjusted according to the actual distance of installation.If you need spouts of other sizes, you can search for \"B0819CXN9B\", \"B0819CW17M\", \"B0819D1QV2\" to find 10-inch, 12-inch, and 14-inch spouts, respectively.
• Safe and durable:Lead-free brass, surface-polished chrome-plated, one-time compression forming filter for outstanding durability in commercial kitchen wall-mounted faucets.very suitable for use in commercial kitchen, Baking house,Restaurant,Cafe,Garden, countyard, Laundry Restroom, etc.
• Scientific design:Spout is equipped with a Swiss Neoperl Aerator, the water is soft, does not splash, the daily water flow is 2.2GPM, The commercial kitchen wall-mounted faucet features a 12-inch Swivel Spout that can be rotated 360 degrees, making it easy to move Spout over other sinks
• Easy to install:No additional accessories or materials are required and can be installed directly. According to the installation process of our manual, you can install it.Complete installation of this commercial kitchen wall faucet in less than 15 minutes

• Commercial Faucet Spout Replacement: This 6 inch swivel spout is designed for wall mount or deck mount commercial faucet with M25*1.25mm connector size,6\" add on spout is designed for 1 compartment sink, please pay attention)
• inch Swivel Swing Nozzle Spout: 6 inch spout reach and 5.5 inch spout height, 2.2GPM Max water Flow, good design for wall mount or deck mount faucet even commercial pre-rinse faucet working on one prep & utility compartment sinks.
• 360 degreeShort Add-on Spout: lead free stainless steel constructed, polished chrome surface with high hardness and heat resistance characteristics. You can rotated the spout 360 degree by hand, easy to control and use.
• Easy to Install and Remove: Max 2.2GPM, easy to install it, just remove the old one and install the new one less than 5 minutes by DIY installation. ( Tip: two gasket is already kept in connector side,just connect it no water tape at first.)
• Reliable Quality Spout: Just 6 inch faucet spout only, no included commercial faucet, 12 months warranty for this swivel spout, any issue, please contact us from your order directly (the spout is good for all most commercial faucet, please make sure the connector size is M25*1.25MM, before you making the order.)

• wall mount kitchen sink faucet with 12\" swivel spout

• wall mount kitchen faucet with 8 inch swivel spout

• pre-rinse spray valve

• Spray Valve repair kit for all most commercial sink sprayer with 2.08 inch diameter ends.(the 304 stainless screw included)
• High quality spray valve sprayer parts the same quality as KWODE commercial faucet, often together purchasing with spray valve together.
• Black color pre-rinse sprayer repair kit with 1.42GPM and more water through holes, all the water will keep into a point, easy to clean the it.
• Easy to DIY replacement, just one tool that enough, install finish just 1 minutes enough.(the spray face, bumper and screw all included).
• Only the spray valve repair kit, no faucet or full spray valve, 12 months quality replacement warranty. Any issue, please just contact us from your order.

• Commercial Faucet Spout Replacement: 6 inch gooseneck swivel spout with swing nozzle is designed for all brand commercial kitchen faucet working on 1 or 2 bowls sinks.(faucet spout connector size is M25*1.25MM, please pay attention)
• inch Swing Nozzle Spout: 6 spout reach, 11.2 spout height,it is the same quality with KWODE commercial faucet, most used for restaurant, industrial big hole prep & utility sink.
• 360 degreeSpout Body: This faucet spout can be rotated 360 degree by hand, stainless steel constructed, chrome polished finish, make it long lifespan, easy to clean and maintain.durable and sturdy, no water leaking complains.
• Easy to Install and Remove: Max 2.2GPM, easy to install it, just remove the old one and install the new one less than 5 minutes by DIY installation. ( Tip: two gasket is already kept in connector side,just connect it no water tape at first.)

• LEAK FREE: its one-piece construction for no leaking
• 1/2 IPS STRAIGHT THERAD :it is NOT 1/2 NPT,it's 1/2 IPS which is also called G1/2,fitting wall commerical faucets with G1/2 female end
• EASY TO INSTAL :Connect the longer end to the back of wall mount faucet,the shorter end to water line,aganist washes at the back of Stainless Steel sink by lock nuts to secure faucet
• INSTALLATION KIT FOR BACKSLASH MOUNT:This elbow adapter with 1/2 IPS male ends is designed to install a wall mount commerical faucet on the backsplash of Stainless Steel Commercial Kitchen Prep & Utility Sink
• SOLD IN PAIR:comes with 90 degree angled elbow joint x 2,lock nut x 2,plastic washer x 2 and rubber washer x 2

• Easy to replace and install, you only need about 5 minutes to remove the original spout and install the new one without additional accessories.
• Design for all kinds of commercial faucet replacement spout, Spout reach 12inches better use in 3 bay compartment sinks at industrial or restaurant.
• Connector size: M22*1mm female thread. This is good replacement spout kit for KWODE commercial faucet.
• Max Water Flow is 2.2 GPM ??Spout can 360 degree Rotate,Easily switch spout to where you need it
• Quality assurance, Spout is made of high quality stainless steel, Chrome Polished, corrosion resistant and durable. One year warranty, one year of quality problems can be replaced free of charge.

• This is the replacement spout for KWODE series faucet. Search brand KWODE and you can find other sizes and types of faucets or accessories
• Inch Spout is the smallest size Spout in the KOWDE series. The material is made of high quality stainless steel. The installation specifications adopt the M22 * 1mm female thread interface that is commonly used in the market, which is suitable for most Wall Mount Commercial Kitchen Faucet in the market.
• This spout can be rotated 360 degrees during use, but the 8 inch spout is generally used with a single or two sinks. If your sink has more than two, please choose a longer spout
• 2.2GPM maximum water flow with Swiss Neoperl Aerator, soft and no splash, ideal for kitchen and restaurant faucets
• Easy to replace and install, you only need about 5 minutes to remove the original spout and install the new one without additional accessories.

• Universal specifications: The dimensions of valve are suitable for most faucets on the market. For detailed product dimensions, please refer to the size picture on the picture page. The product contains a handle, so you don t need to worry about finding a suitable handle.
• High-quality materials: The faucet valve core is made of solid brass material, which is wear-resistant and does not rust. You can use it for more than 3 years.
• Good Sealing: The valves of the faucet is sealed with a rubber gasket, which has a good sealing effect, does not leak, and saves water resources
• Different installation and use methods of hot and cold water valve: The hot and cold water valve core is distinguished by the red and blue marks on the handle. Red is rotated clockwise to open the faucet, counterclockwise to close, and blue is opposite to red. Please assemble according to your faucet characteristics during installation.
• Easy to Install1 screwdriver and 1 wrench can complete the installation, Can be used for single or double hot and cold water taps.Great for bathroom, kitchen

Popular Categories on BuyBestBrands.in