Home Improvement By LiXiongBao

• 3 Colors Change - The light color of led light faucet is blue when the water temperature is below 32 degrees. The light shows green,when the water temperature is between 33 to 41 degrees. It will display the red when the water temperature is between 42 to 45 degrees. the light flashing red when the water temperature is higher than 46 degrees.
• No Need Battery - This led faucet water light has mini built-in generating electricity devices, no need of batteries, as long as the water flow it will give out light, turn off the water, the light goes out immediately. The color changes according to the water temperature
• with Adapter - The product is externally threaded connector with internally threaded adapter. Adapter can make the product suitable for a variety of faucet interface
• Save Water - The product has excellent water conservation function, and connected at the top with the water-saving filter
• Package Includes - 3 X LED water faucet light (Temperature Control,Internal diameter: 0.6 inch. External thread diameter: 0.86 inch.)

• SMART DESIGN: The alarm and magnetic stripe are separated more than 0.39inch(10mm), it keeps going off until you close door(make them connection) or turn it off(switch to the button \"OFF\"). Size: 2.52\" x 1.67\" x 0.66, no much space needed to install. It has 3 adjustable settings (on/off/set). Switch to the button \"SET\", soound like DI..., won't scare your kids or pets decide to leave without your knowing. Switch to the button \"ON\", beep...sound like police siren, very loud
• ALARM ON AND OFF MODE: When someone come in and open a door or window, making the gap more than 0.5 inches, this product will immediately send out an alarm. (high loud, > 90 dB) . If you want to keep the door open, please switch to the alarm off mode
• KEEP YOUR HOME AND OFFICE SAFE: Remind you immediately when the pets or someone come in. Prevent theft when no one at home, and the loud alarm will scare the thief so that you can sleep well at night without worrying about the intruders
• HOW TO INSTALL: Wipe the flat surface, peel off sticker, mount the alarm on door and magnetic stripe on door frame. Done!! NOTE: 1. Take out the plastic insulation sheet in battery compartment before use, 2. The small triangle on the side of the strip magnet is aligned with the small triangle on the side of the alarm with a spacing of less than 0.39inch(10mm), 3. Your frame and window or door must be flush, make these two components must be installed very flush with one another
• What will you get: 12 X Safty Alarm

Popular Categories on BuyBestBrands.in