Home Improvement By NOVINO

• The heavy duty high-speed steel bridge reamer is also called construction reamers,it used for aligning an existing hole and enlarging undersized hole prior to bolt or rivet installation.Our 9/16\" reamer bit aligns and enlarges pre-drilled holes ready for bolting
• Makes reaming holes out extremely easier than using large drill bits,the reamed hole is smooth without tear-outs. But there must be a existing hole or a pilot hole that is smaller than 9/16\" before using our 9/16\" Bridge/Construction Reamer
• The tapered point design permits the reamer bit to enter into the overlapping holes of out-of-line,make the bolt holes line up.Enlarging the holes in the steering knuckles and pitman arm
• The 9/16\" bridge reamer bit is not a drill bit,only aligning reamer to aligh holes which are pre-drilled.If you need to expand a hole to 9/16\". At first there must be a existing holes,then ream out to 9/16\"
• Commonly used in bridge,construction,steel erection and automotive truck trailer industries,our 9/16\" reamer bit for steel,metal,alloy aluminum,brass,plastic,iron,nickel,copper,cast iron etc.Three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools

• The heavy duty high-speed steel bridge reamer is also called construction reamers,it used for aligning an existing hole and enlarging undersized hole prior to bolt or rivet installation.Our reamer bit aligns and enlarges pre-drilled holes ready for bolting
• Makes reaming holes out extremely easier than using large drill bits,the reamed hole is smooth without tear-outs. But there must be a existing hole or a pilot hole that is smaller than 3/8\" before using our 3/8\" Bridge/Construction Reamer.
• The tapered point design permits the reamer bit to enter into the overlapping holes of out-of-line,make the bolt holes line up.Enlarging the holes in the steering knuckles and pitman arm.
• The 3/8\" bridge reamer bit is not a drill bit,only aligning reamer to aligh holes which are pre-drilled.If you need to expand a hole to 3/8\". At first there must be a existing holes,then ream out to 3/8\".
• Commonly used in bridge,construction,steel erection and automotive truck trailer industries,specially use in structural materials such as steel, metal, alloy aluminum,brass,plastic,iron,nickel,copper,cast iron etc.Three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools.

• The heavy duty high-speed steel bridge reamer is also called construction reamers,it used for aligning an existing hole and enlarging undersized hole prior to bolt or rivet installation.Our reamer bit aligns and enlarges pre-drilled holes ready for bolting
• Makes reaming holes out extremely easier than using large drill bits,the reamed hole is smooth without tear-outs. But there must be a existing hole or a pilot hole that is smaller than 3/8\" before using our 3/8\" Bridge/Construction Reamer.
• The tapered point design permits the reamer bit to enter into the overlapping holes of out-of-line,make the bolt holes line up.Enlarging the holes in the steering knuckles and pitman arm.
• The 3/8\" bridge reamer bit is not a drill bit,only aligning reamer to aligh holes which are pre-drilled.If you need to expand a hole to 3/8\". At first there must be a existing holes,then ream out to 3/8\".
• Commonly used in bridge,construction,steel erection and automotive truck trailer industries,specially use in structural materials such as steel, metal, alloy aluminum,brass,plastic,iron,nickel,copper,cast iron etc.Three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools.

• The heavy duty high-speed steel bridge reamer is also called construction reamers,it used for aligning an existing hole and enlarging undersized hole prior to bolt or rivet installation.Our 9/16\" reamer bit aligns and enlarges pre-drilled holes ready for bolting
• Makes reaming holes out extremely easier than using large drill bits,the reamed hole is smooth without tear-outs. But there must be a existing hole or a pilot hole that is smaller than 9/16\" before using our 9/16\" Bridge/Construction Reamer
• The tapered point design permits the reamer bit to enter into the overlapping holes of out-of-line,make the bolt holes line up.Enlarging the holes in the steering knuckles and pitman arm
• The 9/16\" bridge reamer bit is not a drill bit,only aligning reamer to aligh holes which are pre-drilled.If you need to expand a hole to 9/16\". At first there must be a existing holes,then ream out to 9/16\"
• Commonly used in bridge,construction,steel erection and automotive truck trailer industries,our 9/16\" reamer bit for steel,metal,alloy aluminum,brass,plastic,iron,nickel,copper,cast iron etc.Three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools

• The trolling motor battery cable extension kit for extending battery cable between battery and trolling motor
• Lengthening trolling motors wires without impacting the performance of the marine boat trolling motor
• Trolling motor cable extension kit includes: 10 feet trolling motor battery extension cable red&black + connect hardware + safe electrical tape
• 8 gauge cable make sure no power loss when extending battery cable to trolling motor
• Great cable extension kit for fishing boat trolling motor,perfect for hooking up trolling motor to boat battery box

• High Quality:Our marine grade wire is made of tinned copper to make sure good conductivity,Anti-corrosion, high durability,flexibility,stability for a long-lasting performance
• The marine grade duplex tinned copper wire is designed with a thick protective outer insulation coating makes it perfect for heavy-duty marine and other harsh external outdoor wiring projects
• Multi Use: the 8 gauge marine electrical wire use in pontoon boat/bass boat/boat trailer/ fish finder/truck/RV/Van/ATV trailer electrical system:wiring light (spotlight,underwater light,flood light, navigation lights,headlight), solar inverters, shore power,bilge pump,extend new bank charger leads, speaker wire,electric brake wires, radio stereo, alarm etc
• Up to standard of UL 1426 ,SAE, ABYC etc ,our boat marine power wire can perform the marine and other harsh environments of corrosion,open flame,extreme temperature fluctution,heat-shock,deformation, resist abrasion
• Maine wiring Spec:white PVC jacket, red&black conductor sheaths, tinned & stranded True 8 AWG 8/2 flat copper wire,8 awg wire is insulation rated to 600v, 105 degrees C dry, and 75 degrees C wet

Popular Categories on BuyBestBrands.in