Home Improvement By PROMSA

• 1/4\" Shank T-Slot Router Bit, Woodworking (1/4*1/4*5/16)

• CNC Spoilboard Surfacing Router Bit 1/4\" Shank, Slab Flattening Router Bit Planing Bit

• Promsa 3 Pcs Tenon and Deep Plug Cutter Drill Bit Set

• 1/4\" Shank Top Bearing Flush Trim Router Bit, Pattern Router bit (1/4*1/2*1)

• Exact size: This roundover router bits have a 1/8\" radius and 1/4\" shank, ensures compatibility with 1/4\" routers.
• ROUNDOVER ROUTER BIT MATERIAL: Our roundover router bits are designed with C3 micro-grain carbide blades, Build up with heat resistant Teflon coating which can reduce resin build-up for fast and easy cleaning, superior wear resistance, can accurately cut the perfect wooden board
• ROUNDOVER ROUTER BIT FUNCTION: The round over edge forming router bits excellent for producing smooth, uniformly rounded edges. for edging, beading or molding and can be used without the bearing as a standard straight bit, Great for combined plunge-cutting and pattern/template routing.
• ROUNDOVER ROUTER BIT APPLICATIONS : The roundover router bit is suitable for cutting diverse composition materials, such as solid wood, hardwood, softwood, MDF, particle board, plywood compact panel and Acrylic. Additionally, please avoid cutting non-wood materials, especially metal material.
• APPLICABLE EQUIPMENT: The roundover router bit use on CNC and other automatic routers. Such as woodworking engraving machine, trimming machine, CNC hand-held, table-mounted router, etc. (Benchtop router table use only)

• Corner Round Over Router Bits, Carbide Roundover Bits 1/2-Inch Radius with 1/2-Inch Shank

• Pattern Flush Trim Router Bit Set, 1/4 Inch Shank, Top Bearing Flush Trim Bit Kit. Great for trim shelf edging, veneer or laminates

• SIZE: The Compression Bottom Spiral Pattern/Plunge, Shank Mounted Bearing/Bottom Bearing Flush Trim Router Bit, Solid Carbide (Brazed to Steel Shank) Pattern Bit, 1/2 Cutting Diameter, 1 Cutting Length with 1/4 Shank.
• Industrial Quality: The Compression Bottom Spiral Flush Trim Router Bit made of C3 micro-grain solid carbide sleeve, efficient cuts and offers extreme durability, aslo with better chip evacuation, less heat buildup, and cleaner edges.
• Ultra-Performance: The Spiral flush trim router bit 1/4 shank allows complex up-down blade geometry, endgrain of any direction for a perfect finish.
• Wide Application: Use for Rabbeting and Trimming Edges. for Cutting Wood, Plywood, Laminates and Non-Ferrous Metal.
• Applicable Equipment: It can be used on hand held and table mounted portable routers with 1/4\" collet.

• Extra Long Flush Trim Bits Flush trim router bit, 1/2\" Shank x 1/2\" Cut Dia x 2\" Cutting Length.This is of high quality, cuts beautifully, and is true to size
• Excellent Cutting Top bearing Flush Trim Router Bit used for precision work on trimming shelf edging, veneer or laminates with excellent finishing, or quick template work to make duplicate parts or joint an edge straight and smooth.
• Dependable Durability Flush Trim Bit includes the ball bearing guide for easy template work. The bits are well made and sharp as can be. This is of high quality, cuts beautifully, and is true to size.
• Wide Application Flush trimming bits are for laminate, template and pattern.Good general-purpose choice, providing fast cuts and good finishes. Excellent for template work. Applicable for use on hand-held and table-mounted routers.
• 30-day Quality Guarantee If you have any questions, please contact us by email in time for support, we will solve your problem perfectly, thank you for your support and understanding!

• High Quality: Flush Trim Router Bit Set 1/2 Shank, 3/4\"Cut Dia , Cutting Length 1-1/4\" 1-1/2\", 2\". High-quality and super durable bearing and aligned clean cut.
• Important tips: Due to different Pattern flush trim router bit batches, the color of the product you receive may be different from the picture, If you mind, please don't buy it.
• DIY Kit: The flush trim bit professional for wood pieces copy, pattern and trim work, longer life, high quality. This is a great set of bits to use as a starter set.
• Application: Top bearing flush cut router bit, for Woods, MDF, laminate, particleboard, plywood compact panel, acrylic, etc.
• Applicable Machine: Generally suitable for all major Universal 1/2 Shank handheld and table-mounted routers
• 30-day Quality Guarantee: If you have any questions, please contact us by email in time for support, we will solve your problem perfectly, thank you for your support and understanding

• The cnc spoilboard surfacing router bit shank: 1/2\"; Cut Diameter: 2\"; Carbide Inserts: 12*12*1.5 mm, 4-wing design, make more efficient and resulting in a more balanced tool while running.
• This surfacing router bit industrial grade cnc wood router bit, super-strength steel body with anti kickback design, 4 cutting blades.
• The spoilboard surfacing router bit utilizes 4-sided solid carbide inserts, cost-effective insert bit, Replace the carbide inserts when needed,Cost effective solution compared to brazed router bits and solid carbide spiral bits.
• This cnc spoilboard surfacing router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoil board. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc.
• The router planer bit use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc.

• Exact Size: This Insert Carbide Pattern Flush Trim Router Bit, Shank 1/2\" Inch, Shank 12.7mm1/2\"); 4 cutting edges, Cut Diameter: 19.05mm(3/4\"), 1-3/16\" cutting length, Carbide Inserts Size 12*30*1.5mm. Tips: Please check whether the screws are tight before use.
• Hight Quality: This Template Flush Trim Router Bit Blade is made of C3 alloy blades, extremely hard and wear-resistant material, this material can withstand a lot of use without becoming dull or damaged, Suitable for Groving, Trimming, create clean, even, and flush cuts along the edge of a workpiece
• Good Performance: offering high speedcuts with super clean finish. These router bits yield cuts which are cleaner than typical insert bits, Additionally, the sharpness and consistency of the carbide blade allows for cleaner and smoother cuts
• Cut Costs: This flush trim router bit with 4 cutting edges. Insert carbide is the economical way to go, you can replace the router bit inserts, rather than replacing the entire router bit. it is a cost-effective solution.
• Wide Use: This trim router bit perform well on hardwood/softwood, MDF,solid surface, chipboard and plywood, It can be used on hand held and table mounted portable routers. can't use on CNC Machine, Please make sure the cutters diameter is not bigger than the bearings. The cutter diameter is probably assembled bigger than the bearings. it can be re-assembled correctly.

• The surfacing router bit shank: 1/4\"; Cut Diameter: 1\" ; Carbide Inserts: 12*12*1.5mm, 2-wing design, resulting in a more balanced tool while running.
• The slab flattening router bit made of super-strength steel body with anti kickback design, 2 cutting blades.
• The cnc spoilboard surfacing router bit replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits.
• This router planer bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc.
• spoilboard surfacing router bit use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc.

• PACKAGE CONTENT Roundover Router Bits 1/2\"shank 6/19\" radius,bearing guided. The Sinoprotools Corner Rounding Router Bits come in many shapes and sizes to meet the requirements of any style.They're good helper for your woodworking, make your carpentry work easy.
• DURABLE MATERIAL - PROMSA Roundover Router Bits use C3 micro-grain tungsten carbide blades to ensure sharper, longer-lasting edges, making woodworking simpler and smoother.Also, silver induction brazing for maximum strength and durability.In addition,the build-up & heat resistant teflon coating will provide the router bits with superior wear resistance and long life.
• FEATURES - The basic edge-forming bit, the corner-rounding bit rounds an edge to a given radius. The tool is shouldered to cut a fillet. The cut can be used to ease edges, as a simple profile, or as a part of a complex one. Also known as roundover, rounding over and quarter-round. If a smaller pilot bearing is used, a second shoulder can be produced, in effect making the bit a beading bit.
• APPLICATION - Suitable for cutting diverse composition materials, such as solid wood, hardwood, softwood, MDF, particle board, plywood compact panel and Acrylic. Additionally, please avoid cutting non-wood materials, especially metal material. For use on table mount and handheld router.
• PROMSA Warranty - PROMSA are committed to provide the best service for our customers on Amazon, we are take responsible to our items, if you have any problems please feel free to contact us, we will provide you a solution that 100% satisfy you and lifetime quality guarantee.

• Precise Size: router bits 1/2\" shank straight router bits, 1/2\" cutting diameter, 2\" carbide cutting length, Overall length 3-3/4\"
• Premium Material: 1/2 inch router bits made of High-quality alloy steel bodies with C3 micro-grain tungsten carbide blades with Heat resistant Teflon coating. C3 Micro-grain tungsten carbide cutters with Anti-Kickback design for maximum strength and durability
• Neat&Precision Cuts Every Time: router bits 1/2 shank straight cut set is ideal flush trim router bit for fast smooth and accurate trimming cuts for laminates and template work, totally enclosed and lubricated
• Wide Application: These router bits 1/2 shank straight cut ,variety of sizes to cut different thicknesses and depths of solid wood, density boards, MDF, chipboard, splint, and more. ncluding morticing and grooving, as well as template work, rebating and other standard straight cut applications.Please avoid cutting metal and non-wood materials
• Our Service: The router bits 1/2 shank Straight Cut Router Bits is packed in a plastic box for easy storage and carry. Sinoprotools aims to provide high-grade products and customer service to all customers. Any problems, just contact us and our after-sale team will solve your problems. Thanks

Popular Categories on BuyBestBrands.in