Home Improvement By Steel DN Mate

• Ultra harden material for durability and accurate drillingThe cable railing kit is made of high quality solid aluminum 6061, harder than alu alloy, CNC anodized orange finish, excellent wear and corrosion resistance. To ensure precise drilling, we embed harden chrome-plated steel sleeves into this drill guide, using special process, guarantee holes wont wear out or expand during drilling. NOTE: THE DRILL BIT SHOULD BE SMALLER THAN THE HOLE, TO ALLOW THE DRILL TO PASS THROUGH THE HOLES EASILY.
• Patent design, easily operate with larger clamping area. This drill guide jig for angled holes is designed with a dedicated area that doesn't occupy any holes, so you can consistently clamp without covering the holes. CLEAR MARKS on 4 sides of the drill block indicate the CENTER of the holes for precise and convenient use. It can work with 6\" F and C clamp (not included) for stability, no shaking, faster drilling.
• Accurate 3 drilling angles: There are 3 different fixed angles in this angle drill guide: 30 degree, 45 degree and 90 degree. Building a cable railing system becomes much easier and more convenient with the 30 degree & 45 degree angle holes and 90 degree for horizontal and vertical straight holes. A new beginner can quickly drill accurate holes with a electric hand drill with this tool, time-saving and perfect finish.
• 4 different sizes of holes: This cable railing drill block guide offers 4 different size holes: 3/16\" (4.76mm), 1/4\" (6.35mm), 5/16\" (7.93mm), and 3/8\" (9.52mm) which are compatible with most cable railing hardware. 1/4 fits 1/8\" cable railings lag screws, and protector sleeves. The portable drilling hole guide jig can fit easily into your pocket, user-friendly.
• 365-day worry free replacement: We are fully confident in the durability of our portable dowel drill guide. This drill jig for straight holes and angle holes is a very helpful tool for Decking Railings. Scroll down to see a wide range of cable railing kits, made by Steel DN Mate.

• New BLACK deck railing design, clean and elegant. This cable railing kit includes 10 pcs left, 10 pcs right hand thread lag screws, 1 drill bit and 1 wrench. Stainless Steel T316 material, anti-rust ,water and corrosion marine Grade, good for indoor or outdoor usage.
• This deck railing hardware fit 1/8\" OD cable of railing system. The thread screws are designed for timber/wood post. It will rotate the wire rope in the same direction, which resolves the problem of twisting the attached wire. Products without Left & right will bring you hassle and might damage the cable.
• Length of cable should be 1-1/2\" shorter than wood surface distance; if you want to DIY a high quality cable railing system, standard 1/8\" (OD) cable which was made of T316-stainless steel is recommended.
• By the design of Right&left handed thread, of course it can be used to adjust the tension of attached cable, so the turnbuckles are not needed in the railing system. And this cable railing wont be easily unfixed or destroyeded.
• The lag screws could be drilled into wood to adjust the tightness without extra turnbuckle or tensioner. Deck and Stair Cable railing system is not only simple but also won't block your view. Hydraulic crimper is needed to connect the cable to lag screws.

• This drill guide for cable railing is made of high-quality industrial grade aluminum alloy, hard and convenient, easy to carry. Anodized red surface, keep excellent finish, corrosion resistance and durability.

• New BLACK deck railing design, clean and elegant. This cable railing kit includes 10 pcs left, 10 pcs right hand thread lag screws, 1 drill bit and 1 wrench. Stainless Steel T316 material, anti-rust ,water and corrosion marine Grade, good for indoor or outdoor usage.
• This deck railing hardware fit 1/8\" OD cable of railing system. The thread screws are designed for timber/wood post. It will rotate the wire rope in the same direction, which resolves the problem of twisting the attached wire. Products without Left & right will bring you hassle and might damage the cable.
• Length of cable should be 1-1/2\" shorter than wood surface distance; if you want to DIY a high quality cable railing system, standard 1/8\" (OD) cable which was made of T316-stainless steel is recommended.
• By the design of Right&left handed thread, of course it can be used to adjust the tension of attached cable, so the turnbuckles are not needed in the railing system. And this cable railing wont be easily unfixed or destroyeded.
• The lag screws could be drilled into wood to adjust the tightness without extra turnbuckle or tensioner. Deck and Stair Cable railing system is not only simple but also won't block your view. Hydraulic crimper is needed to connect the cable to lag screws.

Popular Categories on BuyBestBrands.in