Home Improvement By uxcell

• Product Name : Motor Carbon Brush;Fitness : Generic Electric Motor
• Carbon Brush Size (Approx) : 14 x 7x 5mm(L * W * T)
• Total Length(Approx) : 3.3cm/1.3\"
• Net Weight : 58g
• Package Content : 10 Pairs x Motor Carbon Brush

• Specifications: Diameter: 3mm / 0.12\", diameter accuracy: +/-0.008mm / 0.0003\"; length: 150mm / 5.9\". High-speed steel rod is with combination of hardness and toughness for wear resistance, hardness HRC61~63
• General Purpose: Widely used for processing milling cutters, sharp knives, gravers, punch press needles, bearings sleeve rods of machine tools, high hard ejector rods and center pins
• Versatile Steel Rods: Suitable for processing top circle, end face, bore, thread, plane, step, groove. Suitable for copper, aluminum, unhardened steel items
• Use Note: Please add some oil during storage and reduce contact with air or do not expose to air for rust protection. The surface is smooth, easy to shape, no cracks formed
• Meet Your Needs: Steel Rods can be easy to cut and formed into replacement parts for almost anything. You can cut to any size you want according to your needs

• Compatibility: M10 x 1.5 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications.
• Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps.
• Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge.
• 8.5mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel.
• Tips: Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.

• [SIZE] - Inner Diameter = 6mm, Outer Diameter = 10mm, Width = 12mm
• [MATERIAL] - Steel Drawn Cup, Steel Cage, Chrome Steel Needle Rollers
• [FEATURES] - The outer ring of needle roller bearing is formed by precision stamping of thin steel plate, the structural space is small, and has a large load capacity
• [CAPABILITY] - Torque: 1.76N*m, Rotating Shaft Limiting Speed: 23000 rpm, Rotating Outer Ring Limiting Speed: 13000 rpm
• [APPLICATIONS] - They are suitable for applications where the installation space is restricted and the housing bore can be used as a raceway

• [Material] - The live center tip is made of 42CrMO and the main body is made of 45# steel, hardened to HRC 502, hardened, and ground with long service life than others.
• [Good Replacement] - This live center can directly replace the old or broken one, perfectly match your original, easy to install.
• [Anti Dust] - The anti-dust seal can prevent cutting fluid and dust from entering the center bearing.
• [Special Design] - The special design of the live center ensures more stable and smooth rotation, and the accuracy is within 0.0003\".
• [Applications] - The MT1 live center is specially designed for medium-speed precision machining lathes with medium load, suitable for high-speed lathes, CNC lathes, and general manual lathes.

• [Material] - The live center tip is made of 42CrMO and the main body is made of 45# steel, hardened to HRC 502, hardened, and ground with long service life than others.
• [Good Replacement] - This live center can directly replace the old or broken one, perfectly match your original, easy to install.
• [Anti Dust] - The anti-dust seal can prevent cutting fluid and dust from entering the center bearing.
• [Special Design] - The special design of the live center ensures more stable and smooth rotation, and the accuracy is within 0.0003\".
• [Applications] - The MT2 live center is specially designed for medium-speed precision machining lathes with medium load, suitable for high-speed lathes, CNC lathes, and general manual lathes.

• Compatibility: M6 x 1 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications.
• Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps.
• Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge.
• 5.0mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel.
• Tips: Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.

• Compatibility: M12 x 1.75 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications.
• Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps.
• Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge.
• 10.2mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel.
• Tips: Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.

Popular Categories on BuyBestBrands.in