Home » Home Improvement » Wennyn

Home Improvement By Wennyn

Zinc Alloy Self-Drilling Dry Wall Anchors with Screws, 60 Pieces (30pairs) - Product Features
  • High strength, easier to start than other self-driving anchors. No need to prepare holes when used on drywall/hollow walls. It can hang up to 60 pounds.
  • They are easy to take out and convenient to store when in use.
  • High-quality and environmentally friendly zinc materials: Zinc materials are more durable than nylon or plastic materials. The gypsum board adopts the principle of thread anchoring to achieve firm bonding on the gypsum wallboard and bear a larger load.
  • Scope of application: only suitable for manual or electric tools to screw into gypsum board/gypsum board at low speed. It can also be used for lightweight concrete, hollow bricks, porous bricks, lime sand bricks and other soft substrates. If the substrate is thick or hard, please drill a 6mm hole in it in advance.
  • Note: When screwing the screw to the end of the tube, the screw will penetrate the tube and push to open the tip of the tail. This is normal so that it can be more closely embedded in the plasterboard.
 
Zinc Alloy Self-Drilling Dry Wall Anchors with Screws, 60 Pieces (30pairs) - Product Features
  • High strength, easier to start than other self-driving anchors. No need to prepare holes when used on drywall/hollow walls. It can hang up to 60 pounds.
  • They are easy to take out and convenient to store when in use.
  • High-quality and environmentally friendly zinc materials: Zinc materials are more durable than nylon or plastic materials. The gypsum board adopts the principle of thread anchoring to achieve firm bonding on the gypsum wallboard and bear a larger load.
  • Scope of application: only suitable for manual or electric tools to screw into gypsum board/gypsum board at low speed. It can also be used for lightweight concrete, hollow bricks, porous bricks, lime sand bricks and other soft substrates. If the substrate is thick or hard, please drill a 6mm hole in it in advance.
  • Note: When screwing the screw to the end of the tube, the screw will penetrate the tube and push to open the tip of the tail. This is normal so that it can be more closely embedded in the plasterboard.
 


Facebook Twitter Instagram LinkedIn
© 2018 - BuyBestBrands.in All Rights Reserved