Power Tools By Generic

Generic 6Mm Shank 14Mm Steel Ball Cutter Woodworking Milling Cutter Carving Tool - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 3Pcs 1/4 Inch Shank Round Nose Router Bit Set - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 19Pcs Hss Titanium Coated Twist Drill Bit Set 1-10Mm Straight Shank Twist Drill Bit - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 20Mm 45 Degree Dovetail Cutter End Mill Cutter - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 8 In 1 19-64Mm Hole Saw Cutter Woodwork Drill Bit - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 10Pcs 5.2Mm Hss Straight Shank Double Head Twist Drill Bit - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic Size:10Mm Hammer Drill Bit Sds Plus Shank 150Mm Concrete Drill Bits - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 6Pcs 6Mm Shank Tungsten Steel Rotary File Cutter Engraving Grinding Bit For Rotary Tools - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 3Pcs Hss Step Drills 1/4 Inch Hex Shank Titanium Coated Step Drill Bit Set - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 5Pcs 1/4 Inch Shank Wood Edge Flush Trim Router Bit - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 5Pcs 1Mm 4 Flutes Tungsten Carbide End Mill Cutter Hrc55 Coating End Mill Cutter - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic Cb09 Graphtec Vinyl Blade Holder For Cutting Plotter With A Blade - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 10Pcs 5.5Mm Twist Drill Bit Set Hss Straight Shank Twist Drill Bits - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 3Pcs 1/4 Inch Hex Shank Hss Titanium Coated Step Drill Bit Set 3/16-1/2 1/4-3/4 1/8-1/2 Inch - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 5Pcs Easy Out Broken Screw Extractor Bolt Remover - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 10Pcs 1.6Mm Micro Hss Twist Drilling Bits Straight Shank Electrical Drill Tool - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 


Facebook Twitter Instagram LinkedIn
© 2018 - BuyBestBrands.in All Rights Reserved