Power Tools By Generic

Generic 10Pcs 1/8 Inch Double Flute Spiral 17Mm End Mill Set Cnc Carbide Flat Nose End Mill - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 3Pcs M7 Hss Step Drill Bit Set 3/16-1/2 1/4-3/4 3/16-7/8 Inch - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 4-32Mm Spiral Grooved Step Drill Bit Nitrogen Coated Step Drill - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 13Pcs 2-8Mm Hss-R Straight Shank Twist Drill Bit Set - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 8 In 1 19-64Mm Hole Saw Cutter Woodwork Drill Bit - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic Hand Punching Beading Tool Set Hand Drill With 10 Pcs 0.8-3Mm Twist Drill Bits And Accessories - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 230Mm Hex Shank Brad Point Drill Sds Auger Drill Bit Spiral Wood Drilling Tool Size 14Mm - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 1Pc Hss Metric Spiral Point Machine Screw Tap Drill Size:M3 - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 22Mm Tungsten Carbide Tip Hammer Drill 460 Mm Sds Plus Masonry Hammer Drill Bit - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 1/2 Inch Shank Flush Trim Router Bit Top With Bottom Bearing Woodworking Tool - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 1/4 Inch Shank Tungsten Carbide Router Bit Rotary Cutting Woodworking Tool - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 6Pcs 3/4/5/6/6.5/8 Mm Titanium Coated Drill Bits Hole Saw Grooving Set - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 25Mm Tungsten Carbide Tip Hammer Drill 460 Mm Sds Plus Masonry Hammer Drill Bit - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 1/2 Inch Shank Cutter Medium Reversible Router Bit For Cnc Wooden Cutter - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 1/4 Inch Shank Mortise Template Flush Trim Router Bit - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 1/2 Inch Shank Diamond Router Bit Woodworking Tool - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 


Facebook Twitter Instagram LinkedIn
© 2018 - BuyBestBrands.in All Rights Reserved