Power Tools By Generic

Generic 6Mm Automatic Center Pin Punch Spring Loaded Marking Starting Holes Tool #2 - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 75Mm Wall Hole Drill Bit Hole Saw Tooth Brick Concrete Cement Walls Hole Cutter - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 3Pcs 1/4 Inch Shank Router Bits Trimming Cutter Woodworking Tool - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic Size: 21Mm Wood Hinge Boring Hole Saw Drill Bit Carbide Cutter Auger Drill Bit - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 3Pcs Countersink Deburring Drill Bits Chamferring Drill Tapper Hole Cutter - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 1/4 Inch Shank 3/4 Inch Radius Carbide Round Over Edging Router Bit Wood Working Cutter - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 75Mm Forstner Drill Bits Wood Working Boring Hard Alloy Hole Saw Cutter - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 1/2 Inch Shank Ogee Chisel Cutter Router Bit Door Woodworking Carpentry Tool - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 55Mm Forstner Drill Bits Wood Working Boring Hard Alloy Hole Saw Cutter - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 10Pcs 3-7Mm Diamond Hole Saw Drill Bit Set Tile Ceramic Glass Porcelain Marble Hole Saw - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 4Pcs 6Mm 8Mm 10Mm 12Mm Hss Straight Shank Cobalt Milling Chucking Reamer - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 5Pcs 15-35Mm Forstner Drill Bits Set Hinge Hole Cutters Wood Working Hole Saw Cutters - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 2Pcs 6/14Mm Tungsten Steel Alloy Blade Ball Woodworking Router Bit - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic Cutting Plotter Blade Holder With 9Pcs 30/45/60 Degree Blades Vinyl Cutter - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 20Mm 60 Degree Hss Dovetail Milling Cutter Straight Shank Woodworking Milling Cutter - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 38Mm Carbide Tip Tct Drill Bit Hole Saw Cutter With Spanner - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 


Facebook Twitter Instagram LinkedIn
© 2018 - BuyBestBrands.in All Rights Reserved