Power Tools By MXBAOHENG

• Stainless steel rod & blade ?This air mixer comes with the 304 stainless steel stirring rod and blade, which is durable and not easy to rust.
• Stepless speed regulation ?A valve at the inlet allows you to adjust the speed of the mixer according to the viscosity of the paint.
• Two clamps ?This pneumatic paint mixer comes with two clamps, one is horizontal and another is vertical, so that it could be used with two methods. When using this mixer with the horizontal clamp, please note the diameter of your should not exceed 60cm. The maximum clamping thickness of the vertical clamp is 25mm.
• Parameters ?Motor: Pneumatic; Mixing capacity: 50 Gallon /200L Tank; Power: 1/2 Horsepower; Blade material: stainless steel; Weight: 20lbs.
• Application ?This pneumatic mixer is suitable for paint stirring in the process of spraying, especially for paint stirring in mixed spraying, and also for stirring of various other paints, as well as for homogenization, dispersion and emulsification in chemical, food, pharmaceutical and cosmetic industries.

• [Comfortable handle]: The handle of this screwdriver is of ergonomic design, which is comfortable to hold and can make users woke long hours without fatigue. Anti-slip strips on the handle can increase cushioning and save effort.
• [One-key forward and reverse switch]: There is a forward and reverse switch on the screwdriver, easy to remove and tighten the screws. R gear: Reverse removing screw; F gear: Forward tightening screw.
• [Torque stepless adjustment]: The torque of this electric screwdriver is stepless adjusting from small to large, and the speed remains unchanged. Clockwise increases torque, counterclockwise decreases torque.
• [Parameter comparison]: The power of BSD-101 is 36W, its applicable batch head is 5mm and applicable screw bits is 1.2~5mm. The power of BSD-102 is 45W, its applicable batch head is 6.35mm and screw bit is 2-6mm.
• [Service & Warranty]: Our products have one year warranty and if you have any questions, please just feel free to contact us.

• Cutting Range : Aluminum DIN rails: width of 35mm/1.4inch, a height of 6.5-7.5mm/0.26-0.3inch, and a thickness of 0.5-1.5mm/0.02-0.06inch.
• Anti-slip Handle : The cutting handle is equipped with anti-slip bumps, which is comfortable to grip and labor-saving.
• Sharp Knife Edge : The knife edge is sharp, the cutting surface is smooth, without burrs, and the operation is simple and time-saving and labor-saving.
• Precise Cutting : The guide rail cutting machine has a special ruler, which can quickly adjust the cutting size, which is convenient for batch cutting.
• Widely Application : It is suitable for cutting aluminum guide rails, especially for electric power, construction and other industries to operate in the field.

• Environmental material The roller of this self leveling concrete tool kit is made of PE material, which is environmental and has good toughness and high strength. It is durable and not easy to break teeth, greatly save the construction cost.
• Parameters Spike Shoe Size: 30x14cm(12\"x5.6\"); Spike Length: 2.6cm(1.1\"); Roller needle length: 28mm; Rack: 5mm
• Easy to clean The teeth of the roller are cleverly used between the teeth bite structure to ensure a tight fit between the teeth, anti-slip, anti-rotation, disassembly and cleaning more convenient.
• Wide Application This epoxy floor tools kit has a wide using range, it could be used for cement/epoxy self-leveling defoaming construction in home or industry.
• Package Included 10? roller x 1; 20? roller x 1; One pair of spike shoe; Scraper with blade x 1

Popular Categories on BuyBestBrands.in