Power Tools By uxcell

• [SIZE] - Inner Diameter = 6mm, Outer Diameter = 10mm, Width = 12mm
• [MATERIAL] - Steel Drawn Cup, Steel Cage, Chrome Steel Needle Rollers
• [FEATURES] - The outer ring of needle roller bearing is formed by precision stamping of thin steel plate, the structural space is small, and has a large load capacity
• [CAPABILITY] - Torque: 1.76N*m, Rotating Shaft Limiting Speed: 23000 rpm, Rotating Outer Ring Limiting Speed: 13000 rpm
• [APPLICATIONS] - They are suitable for applications where the installation space is restricted and the housing bore can be used as a raceway

• Specifications: Diameter: 3mm / 0.12\", diameter accuracy: +/-0.008mm / 0.0003\"; length: 150mm / 5.9\". High-speed steel rod is with combination of hardness and toughness for wear resistance, hardness HRC61~63
• General Purpose: Widely used for processing milling cutters, sharp knives, gravers, punch press needles, bearings sleeve rods of machine tools, high hard ejector rods and center pins
• Versatile Steel Rods: Suitable for processing top circle, end face, bore, thread, plane, step, groove. Suitable for copper, aluminum, unhardened steel items
• Use Note: Please add some oil during storage and reduce contact with air or do not expose to air for rust protection. The surface is smooth, easy to shape, no cracks formed
• Meet Your Needs: Steel Rods can be easy to cut and formed into replacement parts for almost anything. You can cut to any size you want according to your needs

• Compatibility: M10 x 1.5 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications.
• Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps.
• Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge.
• 8.5mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel.
• Tips: Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.

• Core Drill Bits: Drilling Diameter: 90mm / 3.54\"; Working Depth (Max .): 51mm / 2.01\"; Female Thread Size: M10 x 1.5. Used on M10 angle grinders, easy to operate.
• Brazed Diamond: Diamond grains are permanently brazed to the cutting edge. Provide high efficiency, fast and smooth drilling, and also ensure longer working life.
• Wide Applications: Suitable for drilling porcelain, tile, marble, stone, masonry, brick, glass. Can be dry or wet use. It is recommended to be used with water for cooling and lubrication to prolong the using life and increase the performance.
• Features: Large clearance hole facilitates entrance of cooling water and escape of chips and other particles from drilling. Creates a precision and smooth cut, less chipping and minimizing breakage.
• Arbor Adapter: The adapter converts M10 thread to 3/8-inch (9.5mm) triangle shank. Fits most bench drills, hand electric drills. Tips: Reduced drill speeds, low drill pressure and increased use of water lubrication will extend drill bit life considerably.

• Twist Drill Bits: Drilling Diameter: 3mm / 0.118\"; Flute Length: 19mm / 0.75\"; Overall Length: 38mm / 1.5\". Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches.
• Wide Applications: Used for precision cutting of alloy steel, tool steel, stainless steel, hardened steel and other high-hardness and difficult-to-machine materials. The AlTiSin composite coating has high hardness, high wear resistance and high thermal stability.
• Material: Constructed from ultra-fine DIN K45 (ISO P10) tungsten carbide, the drill bit is good toughness, high hardness and wear resistance. With good milling and cutting performance, can ensure high work efficiency. Carbide tool offers faster cutting speeds than other substrates.
• Features: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy.
• Tips: Used on machining centers, CNC lathes. The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life.

• [Specification] Drilling Diameter: 5/64 inch; Drilling Depth: 18mm / 0.71 inch
• [Precise Positioning] The drill bush is designed for precise positioning without moving.
• [Widely Application] It's used for the installation of the door hinge, door butt, handles, drawer slides, etc.
• [Specific Design] The sawdust will be automatically discharged from the sides of the drill hole, and will not block the drill.
• [Material] The drill bit is made of high-speed steel, sharper and more durable, high hardness, wear resistance, good toughness, heat and corrosion.

• Specifications: Taper size: MT1; cutting diameter (Max.): 13mm / 0.51\"; cutting diameter (Min.): 9.5mm / 0.37\"; accuracy class: H8. The Morse Taper reamers ream the Morse Taper shape, and provide coarse cuts.
• Material and Coating: Made of carbon tool steel, the reamers have high hardness and durability. Features just the base substrate without any coatings, suitable for wide ranges of applications.
• Wide Applications: Used for mold processing, handicraft processing, and bore machining. Suitable for accurate reaming in aluminum, cast iron, copper, plastic, wood, and other soft materials.
• Easy to Use: Can be hand operated by use of wrenches. Great for light cut, repair work, or simply for enlarging holes. Always keep reamers clean, and used with machine oil for long service use.
• Straight Flute: Straight flute tools allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts.

• UXCELL (U excel !) is the sole authorized Seller of uxcell products
• Product Name : PCB Drill Bit;Material : Tungsten Carbide;Cutting Diameter : 0.25mm / 0.01\";Cutting Depth : 5 mm / 0.2\"
• Shank Diameter : 3 mm / 0.12\";Total Length : 38 mm / 1.5\"
• Color : Silver Gray;Weight : 42g
• Package Content : 10 x PCB Drill Bits1 x Plastic Case

Popular Categories on BuyBestBrands.in