Screwdrivers By Taparia

• 10 Piece Set (1/16\",5/64\",3/32\",1/8\",5/32\",3/16\",7/32\",1/4\",5/16\"&3/8\")
• Accurately Hardened and Tempered to Withstand Higher Torque and Enables High Wear Resistance. High Grade Alloy Steel
• The blade is made from high grade Silicon - Manganese steel, which no other make uses. This steel gives spring effect also. :: The blade is differentially hardened & tempered to resist wear, bending and meet high torque requirement.
• Hardness on tip: 55 to 58 HRC. Other makes offer much less hardness on tip. Higher the hardness higher is the wear resistance. :: The blade tip is magnetized to lift small screw etc. from confined spaces or to hold the screw in position

• Product 1: Made from high carbon steel
• Product 1: Cutting edges are induction hardened of 55 to 60 HRC
• Product 1: Specially designed for extra leverage
• Product 2: Country of Origin: India
• Product 3: Material: SteelColor: Red and Black
• Product 3: Package Contents: 1-Piece Combination Plier with Joint Cutter
• Product 3: Generally conforming to is 6149-1984 grade ii

• Product 1: Country of Origin: India
• Product 2: Material: SteelColor: Yellow
• Product 2: Package Contents: 1-Piece Tester
• Product 2: 1 Year Standard Product Warranty
• Product 2: Generally conforming to is 5579 - 1985

• Material: SteelColor: Green
• Package Contents: 1-Piece Tester
• 1 Year Standard Product Warranty
• Generally conforming to is 5579 - 1985
• Set of 8 Blades - 1 Blade of 3.5x0.5mm, 1 Blade of 4.3x0.6mm, 1 Blade of 6x0.8mm, Phillips No. 1, Phillips No. 2, Poker Round, Poker Square, Wooden Screw Type and 1 Handle with Neon Bulb
• Made Out of High Grade Steel and Transparent Green Cellulose Acetate Handle
• Handle is Made from High Grade C. A. Plastic is Non Flammable and Unaffected by Oil Petrol, Grease and Water
• Conforming to IS 844-1979 .

• Product 1: Made from high carbon steel, cutting edges are induction hardened of 55 to 60 HRC More leverage due to special design
• Product 1: Sleeves are thicker for grip Excellent wire cutting ability for soft and hard wires
• Product 1: Sleeves are thicker for convenient grip
• Product 2: Material: SteelColor: Green and Yellow
• Product 2: Package Contents: 1-Piece Two in One Screw Driver
• Product 2: 1 Year Standard Product Warranty
• Product 2: Tip dimensions: 2 philips, 6.0 x 0.8 mm

• Product 1: Country of Origin: India
• Product 2: Country of Origin: India

• Product 1: Material: SteelColor: Blue and Silver
• Product 1: Package Contents: 1-Piece Bevelled Edge Chisel
• Product 1: 1 Year Standard Product Warranty
• Product 1: Size: 19 mm (3/4)
• Product 2: Material: SteelColor: Green and Yellow
• Product 2: Tip dimensions: 2 philips, 6.0 x 0.8 mm

• Product 1: Material: SteelColor: Red and Black
• Product 1: Package Contents: 1-Piece Combination Plier with Joint Cutter
• Product 1: Generally conforming to is 6149-1984 grade ii
• Product 2: The blade is made from high grade Silicon - Manganese steel, which no other make uses. This steel gives spring effect also.
• Product 2: The blade is differentially hardened & tempered to resist wear, bending and meet high torque requirement
• Product 2: The blade tip is magnetized to lift small screw etc. from confined spaces or to hold the screw in position
• Product 3: Material: SteelColor: Yellow
• Product 3: Package Contents: 1-Piece Tester
• Product 3: 1 Year Standard Product Warranty

• Generally conforming to is 844 - 1979
• Transparent Green cellulose acetate handle.
• The handle is made from high grade C. A. Plastic which is not flammable and unaffected

• Product 1: The body is octagonal which facilitates the comfortable holding while in use. Cutting edges are ground accurately to appropriate angle for metal cutting. Phosphated and painted to provide anti-rusting properties Taparia Octagonal Chisels generally Conform to I.S. 402-1990
• Product 2: The blade is made from high grade Silicon - Manganese steel, which no other make uses. This steel gives spring effect also.
• Product 2: The blade is differentially hardened & tempered to resist wear, bending and meet high torque requirement
• Product 2: The blade tip is magnetized to lift small screw etc. from confined spaces or to hold the screw in position
• Product 2: The handle can stand any rough use, even hammering.

• Product 1: Material: SteelColor: Silver
• Product 1: Package Contents: 1-Piece Utility Knife
• Product 1: Blade width: 19 mm
• Product 1: Country of Origin: India
• Product 2: Material: SteelColor: Green and Yellow
• Product 2: Package Contents: 1-Piece Two in One Screw Driver
• Product 2: 1 Year Standard Product Warranty
• Product 2: Tip dimensions: 2 philips, 6.0 x 0.8 mm

• The blade is made from high grade Silicon - Manganese steel which provides high strength
• This steel gives spring effect also.The blade is differently hardened and tempered to resist wear, bending and meet high torque requirement.
• Other makes offer same hardness through out the length of the blade, which is not scientific.
• Hardness on tip : 55 to 58 HRC. Other makes offer much less hardness on tip.
• Higher the hardness higher is wear resistance.The blade tip is magnetised to lift small screw etc.from confined spaces or to hold the the screw in position.

• Taparia
• screwdriver
• 913

• It is a Combination Plier, 8-Inch
• Comes with a Screw Driver Tester
• Easy to use and long-lasting product

Popular Categories on BuyBestBrands.in