Switchers & Dimmers By Quick Sense

Qs-T3) Din Type Digital Timer Controller-Programmable for Daily/Weekly White - Product Features
  • World Weekly Programmable Time Switch With special edition extra heavy duty relay -Lcd Display - 20 Times On/Off daily
  • Multi Function Precise time programming for Daily / Weekly - Minimum Interval 1 minute
  • New Microprocessor Controlled Best Quality Guaranteed.Used For Automatic Switching On/Off For Electronic Sirens / Street Light / Signage Board / Hydroponics / Signalling / Home Automation etc
  • Accurate To The Minute Control , Superior relay & Weekend exclusion (FRI SAT or SAT SUN) and Weekly OFF programming
 
QS-301) : 220 V Auto Day/Night on and off Photocell, LDR Sensor Switch (6 A) for Lighting/Warranty:18 Months (Water Proof) - Product Features
  • SPECIFICATION:- Power source: 220-240V/AC; Power Frequency: 50Hz; Rated Current: 6A; Ambient Light: <10LUX (ON); Working Temperature: -20~+40? >40LUX (OFF); Working Humidity: <93%RH
  • Installation: Switch off the power. Connecting the wire as per the following figure. Please install the item with the correct orientation (see figure A) what shows in the metal bracket and according to the correct installation place with the enclosed inflated screws.
  • Things To Take Care: In front of the photocell, it should be no obstruction effecting to accept natural light. In front of the photocell, it should be no swaying object.
  • Test: Switch on the power. Please using enclosed black opaque bag in the packing when you testing in daytime. When the bag mantles the detection window of the photocell, the ambient light of the items will be dark, it makes lamp on. When take off this bag, it makes lamp off by automatically.
 
Qs-T1) : 230 Volt (24x7) Digital Programmable Timer Electronic Timer/Energy Saving Socket Type(Timer switch(Set of 2)) - Product Features
  • Automatic Sensor Light Control Switch/ It can use Street Light, Garden Lights, Incandescent lamp, LED lights
  • Working : As shown in the above diagram out of three wire's Red : Load, Blue : Neutral and Brown : Phase. Connect Red and Blue to Load Application where using (i.e. Lighting) and Brown and Blue to 230 VAC input supply. Now it is ready to operate Day/Night mode. For testing keep torch over to the Photocell load will turn on
  • Fully Automatic Switching on and Off Operation
  • Light turn on in the dark and turn off on daytime, intelligent sensor, no need to operate by manual
 


Facebook Twitter Instagram LinkedIn
© 2018 - BuyBestBrands.in All Rights Reserved