Tool Kits By uxcell

• Specifications: Diameter: 3mm / 0.12\", diameter accuracy: +/-0.008mm / 0.0003\"; length: 150mm / 5.9\". High-speed steel rod is with combination of hardness and toughness for wear resistance, hardness HRC61~63
• General Purpose: Widely used for processing milling cutters, sharp knives, gravers, punch press needles, bearings sleeve rods of machine tools, high hard ejector rods and center pins
• Versatile Steel Rods: Suitable for processing top circle, end face, bore, thread, plane, step, groove. Suitable for copper, aluminum, unhardened steel items
• Use Note: Please add some oil during storage and reduce contact with air or do not expose to air for rust protection. The surface is smooth, easy to shape, no cracks formed
• Meet Your Needs: Steel Rods can be easy to cut and formed into replacement parts for almost anything. You can cut to any size you want according to your needs

• Compatibility: M10 x 1.5 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications.
• Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps.
• Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge.
• 8.5mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel.
• Tips: Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.

• [SIZE] - Inner Diameter = 6mm, Outer Diameter = 10mm, Width = 12mm
• [MATERIAL] - Steel Drawn Cup, Steel Cage, Chrome Steel Needle Rollers
• [FEATURES] - The outer ring of needle roller bearing is formed by precision stamping of thin steel plate, the structural space is small, and has a large load capacity
• [CAPABILITY] - Torque: 1.76N*m, Rotating Shaft Limiting Speed: 23000 rpm, Rotating Outer Ring Limiting Speed: 13000 rpm
• [APPLICATIONS] - They are suitable for applications where the installation space is restricted and the housing bore can be used as a raceway

• [Material] - The live center tip is made of 42CrMO and the main body is made of 45# steel, hardened to HRC 502, hardened, and ground with long service life than others.
• [Good Replacement] - This live center can directly replace the old or broken one, perfectly match your original, easy to install.
• [Anti Dust] - The anti-dust seal can prevent cutting fluid and dust from entering the center bearing.
• [Special Design] - The special design of the live center ensures more stable and smooth rotation, and the accuracy is within 0.0003\".
• [Applications] - The MT1 live center is specially designed for medium-speed precision machining lathes with medium load, suitable for high-speed lathes, CNC lathes, and general manual lathes.

• [Material] - The live center tip is made of 42CrMO and the main body is made of 45# steel, hardened to HRC 502, hardened, and ground with long service life than others.
• [Good Replacement] - This live center can directly replace the old or broken one, perfectly match your original, easy to install.
• [Anti Dust] - The anti-dust seal can prevent cutting fluid and dust from entering the center bearing.
• [Special Design] - The special design of the live center ensures more stable and smooth rotation, and the accuracy is within 0.0003\".
• [Applications] - The MT2 live center is specially designed for medium-speed precision machining lathes with medium load, suitable for high-speed lathes, CNC lathes, and general manual lathes.

• Compatibility: M6 x 1 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications.
• Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps.
• Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge.
• 5.0mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel.
• Tips: Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.

• Compatibility: M12 x 1.75 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications.
• Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps.
• Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge.
• 10.2mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel.
• Tips: Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break.

• Mounted Point: Head diameter: 8mm / 0.31\" (spherical diameter is about 1mm-1.5mm smaller than the head diameter.); shank diameter: 6mm / 0.24\"; grits: 600 (fine grit); head shape: spherical, concave (the concave arc is smaller than a semicircle.).
• Wide Applications: Suitable for polishing jade, amber, stone, beeswax, glass etc. Specially used for forming and grinding spherical bead. Produce clean and accurate spherical beads in minutes with little or no chipping.
• Easy to Use: Can be used on bench drills, hand drills (not included here). The recommended speed is 2000-3000 rpm/min, for general purpose grinding in wide ranges of applications.
• Features: Electroplated diamond has high hardness and good wear resistance. Chamfered round shank provides easier clamping and stable working process.
• Tips: Always use lubricant (water or cutting fluid) to cool the workpiece when the grinding bit is working. Low drill pressure and increased use of water lubrication will extend the life of mounted point.

• Mounted Point: Head diameter: 12mm / 0.47\" (spherical diameter is about 1mm-1.5mm smaller than the head diameter.); shank diameter: 6mm / 0.24\"; grits: 100 (croase grit); head shape: spherical, concave (the concave arc is smaller than a semicircle.).
• Wide Applications: Suitable for polishing jade, amber, stone, beeswax, glass etc. Specially used for forming and grinding spherical bead. Produce clean and accurate spherical beads in minutes with little or no chipping.
• Easy to Use: Can be used on bench drills, hand drills (not included here). The recommended speed is 2000-3000 rpm/min, for general purpose grinding in wide ranges of applications.
• Features: Electroplated diamond has high hardness and good wear resistance. Chamfered round shank provides easier clamping and stable working process.
• Tips: Always use lubricant (water or cutting fluid) to cool the workpiece when the grinding bit is working. Low drill pressure and increased use of water lubrication will extend the life of mounted point.

• Spotting Drill Bits: Cutting Edge Diameter: 3mm / 0.12\"; Shank Diameter: 3mm / 0.12\"; Point Angle: 60 Degree; Total Length : 50mm / 2.0\". Large spiral flutes provide neat and smooth cuts. Spiral groove facilitates the export of metal chip.
• Wide Applications: Widely used for drilling steel below HRC60, such as stainless steel, carbon steel, die steel, alloy steel. The AlTiSin composite coating has high hardness, high wear resistance and high thermal stability.
• Carbide Tool: Made of fine-grained tungsten carbide, the drill bit has good toughness, high hardness (HRC92), wear resistance and heat resistance. With good cutting strength and drilling effect, carbide tool offers long tool life and faster cutting speeds than other substrates.
• Easy to Use: Universal chamfered round shank, easier clamping, stable cutting process. Suitable for CNC machining centers, CNC machine tools, precision engraving machines and other equipment. The longer the length of the tool clamped by the chuck, the better.
• Tips: If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life. Select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.

• Spotting Drill Bits: Cutting Edge Diameter: 6mm / 0.24\"; Shank Diameter: 6mm / 0.24\"; Point Angle: 60 Degree; Total Length : 50mm / 2.0\". Large spiral flutes provide neat and smooth cuts. Spiral groove facilitates the export of metal chip.
• Wide Applications: Widely used for drilling steel below HRC60, such as stainless steel, carbon steel, die steel, alloy steel. The AlTiSin composite coating has high hardness, high wear resistance and high thermal stability.
• Carbide Tool: Made of fine-grained tungsten carbide, the drill bit has good toughness, high hardness (HRC92), wear resistance and heat resistance. With good cutting strength and drilling effect, carbide tool offers long tool life and faster cutting speeds than other substrates.
• Easy to Use: Universal chamfered round shank, easier clamping, stable cutting process. Suitable for CNC machining centers, CNC machine tools, precision engraving machines and other equipment. The longer the length of the tool clamped by the chuck, the better.
• Tips: If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life. Select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.

• [Size] - Shank Diameter: 1/4\", Head Diameter: 25mm / 0.98 inch, Total Length: 51mm / 2.00 inch.
• [Details] - Grinding Bit Material: White Corundum, Shape: Ball, Mesh: 80 Grit, Recommended Speed: 25-40m/s. The ball shape is suitable for surface and edge grinding.
• [Material] - White corundum has a higher hardness than brown corundum. The particle size is easily broken, the edges and corners are sharp, good self-sharpening, strong grinding force, high efficiency, and high-temperature resistance.
• [Applications] - Suitable for grinding of hardened steel, high carbon steel, general high-speed steel, alloy steel, etc. cutting tools and workpieces, precision grinding of measuring tools and instrument parts, and also suitable for form grinding.
• [Notice] - The new corundum grinding bit should be tried at a low speed before use. If there is a jumping problem, do not continue to use it. Flying chips may be generated during use. Please use jigs, non-slip finger stall, and wear protective glasses when using this corundum grinding bit.

• Specification - 2.36\" (60mm) Jaw Spread, 1.57\" (40mm) Jaw Reach, 1.2T Max Force, fit for 10-40mm diameter bearings.
• Durable Material - Made with heat-treated high carbon steel for strength and durability.
• Rustproof - The jaws are zinc plated and the screw rod is black oxide coated for corrosion resistance and long service life.
• Three Jaw Design - Balances the pulling force well, not easy to fall off when applying force. Fit for pulling work in confined areas.
• Universal - Can be used with a wrench, ratchet or wrench to easily remove rusted gears, sprockets, bearings, pulleys, etc.

• Twist Drill Bits: Drilling Diameter: 5.1mm / 0.201\"; Flute Length: 25mm / 0.98\"; Overall Length: 50mm / 1.97\". Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches.
• Wide Applications: Used for precision cutting of alloy steel, tool steel, stainless steel, hardened steel and other high-hardness and difficult-to-machine materials. The AlTiSin composite coating has high hardness, high wear resistance and high thermal stability.
• Material: Constructed from ultra-fine DIN K45 (ISO P10) tungsten carbide, the drill bit is good toughness, high hardness and wear resistance. With good milling and cutting performance, can ensure high work efficiency. Carbide tool offers faster cutting speeds than other substrates.
• Features: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy.
• Tips: Used on machining centers, CNC lathes. The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life.

• Twist Drill Bits: Drilling Diameter: 2.5mm / 0.098\"; Flute Length: 19mm / 0.75\"; Overall Length: 38mm / 1.5\". Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches.
• Wide Applications: Used for precision cutting of alloy steel, tool steel, stainless steel, hardened steel and other high-hardness and difficult-to-machine materials. The AlTiSin composite coating has high hardness, high wear resistance and high thermal stability.
• Material: Constructed from ultra-fine DIN K45 (ISO P10) tungsten carbide, the drill bit is good toughness, high hardness and wear resistance. With good milling and cutting performance, can ensure high work efficiency. Carbide tool offers faster cutting speeds than other substrates.
• Features: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy.
• Tips: Used on machining centers, CNC lathes. The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life.

Popular Categories on BuyBestBrands.in