Tools & Testers By NOYAFA

• Accurate Identification NOYAFA NF904 fiber optic tester can accurately detect and locate fiber breaks, poor connections, bends or cracks. VFL emits 650nm red light for fiber optic tracking and positioning. Breaks or faults in the fiber will cause the light to refract. Laser: Class 2
• Wide Application Universal 2.5mm connector designed for ST, SC, FC can interfere with round and square of different optical fiber cables, and can test single-mode and multi-mode cables. Suitable for integrated wiring system, optical fiber engineering, CATV engineering optical fiber network maintenance, optical communication, optical measurement drive engineering, optical device production and research.
• Excellent Function NOYAFA NF904 visual fault locator has a strong light source output power of 30mW, constant output power, high-efficiency power supply circuit provides stable power supply, continuous wave and pulse mode, and produces bright light around the fault area.
• High-quality design Made of high-quality aluminum alloy, it can prevent damage caused by collision and dust. The grounding design of the shell can effectively prevent damage from electrostatic discharge. The frosted paint process has good anti-oxidation and corrosion resistance. The pen-shaped non-slip design provides a better grip. The light source is strong and durable, and the size is compact and easy to carry.
• Battery Powered Powered by 2*AA batteries, the battery life is long and can work continuously for more than 20 hours. Making it a must-have tool for engineers. Tips: When the VFL pen is not in use, please remove the battery to prevent battery leakage and damage to the light source.

• Applicable network cable models NOYAFA network cable tester is suitable for RJ45 CAT5, CAT5E, CAT6, CAT6A, CAT7, RJ11, RJ12 telephone line CAT3 (6P2C/6P4C/6P6C) (Note: This device cannot be used to test network cables and telephone lines while the device is powered, otherwise the device will be seriously burned)
• Detection function The NOYAFA tester can quickly test the results of open circuit, crossover, straight-through, and short circuit, quickly detect the crimping condition of the crystal head, and can also measure special shielded network cables (UTP/STP)
• HOST & REMOTE Cable tester is used to detect short circuits, open circuits and cross-point wiring faults on wired lines, hosts and remote ends to maintain smooth operation of the network. The maximum test distance is 2000m.
• Power supply test NOYAFA network cable tester quickly determines the power supply type and status of the POE switch, and prompts that the battery power and voltage are low, and the LED light can visually display the results
• POE Two Standards NOYAFA network cable tester supports two standards: 802.3af and 802.3at. It's easy to use and completely new Can be used in household, industrial and other fields (battery not included in package)

• CABLE TYPE RJ45 CAT5, CAT5E, CAT6, CAT6A , RJ11 / RJ12 telephone line CAT3 (6P2C/6P4C/6P6C) POE test /Router-to-wire
• ETHERNET TESTER cable tester for problematic shorts, opens, cross-pairs, and other wiring faults, HOST & REMOTE,Remote viewing of cables,the maximum test distance is 1000m.
• QC FUNCTION Quick test results (open circuit, crossover, straight through, Short circuit), quickly detect the crimping condition of the crystal head, Special shielded network cables can also be measured(UTP/STP).
• POWERED TEST - 60V network & cable testers Quickly judge the power supply type and power supply status of the POE switch, and prompt the battery and low voltage,LED visual display of results.
• LITHIUM BATTREY CHARGING & LONG LIFE ethernet cable tester NOYAFA NF-468CS easy to use, new upgrade,used in home, industry and other fields,Auto shutdown function.

• CABLE TYPE RJ45 CAT5, CAT5E, CAT6, CAT6A , RJ11 / RJ12 telephone line CAT3 (6P2C/6P4C/6P6C) POE test /Router-to-wire
• ETHERNET TESTER cable tester for problematic shorts, opens, cross-pairs, and other wiring faults, HOST & REMOTE,Remote viewing of cables,the maximum test distance is 1000m.
• POWERED TEST - 60V network & cable testers Quickly judge the power supply type and power supply status of the POE switch, and prompt the battery and low voltage,LED visual display of results.
• QC FUNCTION cat 5 tester Quick test results (open circuit, crossover, straight through, Short circuit), quickly detect the crimping condition of the crystal head, Special shielded network cables can also be measured(UTP/STP).
• LITHIUM BATTREY CHARGING & LONG LIFE ethernet cable tester NOYAFA NF-468CS easy to use, new upgrade,used in home, industry and other fields,Auto shutdown function.

• 1. Check continuity of LAN Cable & Coax cable.
• 2. Power bank or DC 9V Battery for power supply
• 3. Test correspondingly double-twisted cables 1, 2, 3, 4, 5, 6, 7, 8 and ground
• 4. Easy to read LED display indicates problems. Hand-held for portability.
• 5. Slow and fast test switch, lamp for work in dark.

• [Multi Function Testing Mode]It supports to open, short, cross of lan cable, included STP cable.
• [Cable scanning function]Cable tester can looking for RJ11/RJ15/Electronic cables?through the sound of the receiver and the yellow-green signal indicator, the target line position can be accurately located.
• [Wiremap function]The wiremap function is mainly used to detect the wire sequence, short circuit, open circuit, and cross of the network cable, and display the test results in the form of wire sequence lights.
• [Telephone line status detection]It can test the polarity and on-off of the telephone line, and can also detect the state of the telephone line, such as idle, ringing, and conversation.
• [PoE Switch Testing]The RJ45 of the receiver is connected to the POE switch with a normal network cable, and the power supply connection of the POE switch can be tested.

• [PoE Wire Tracker] Three scan modes selectable: Digital mode/ Analog mode/ PoE mode
• [Measure Cable Length] It can measure cat5, cat6 cable, the range is 200m.
• [PoE Testing Via Switch] Hub blink for locating network port by flashing port light on Hub Switch. Available to 10M/100M/Hub/switch.
• [Cable Continuity Testing] Test physical status for STP, UTP lan cable
• [Non-contact voltage detecting] You can press the \"Power/Set\" button on the receiver, if the \"NCV indicator is light on, then you can use the receiver to detect AC voltage presence.

• Are you still annoyed by faulty underground cable lines The underground wire locator helps you easily trace and locate underground wires or in-wall wires, low-voltage wires, metal cables,pet fence wires, etc,detecting cable break , locating alarm, measuring wire depth, and pinpointing drill sites.

• 1. Are you still worrying about broken underground wires? Underground cable locator helps you locate and track buried and hidden wires.
• 2. Are you still worrying about the high maintenance cost? The customer told us that the cable locator saved him at least $500.
• 3. Still worrying about your dog's inability to run happily? Easily locate pet fence wires, metal wires, wires, etc. (only applicable to single-strand or double-strand parallel connection, not applicable to multi-strand wires!!!)
• 4. Do you know how it works? Position-determine the socket on a specific circuit, track before drilling-accurately locate the hole position. The routing range can reach 2-3 feet underground and 1000 feet long.
• 5. What are you going to have? Transmitter and receiver (both transmitter and receiver are powered by 3.7V rechargeable lithium battery, both with low battery indicator) anti-noise headphones, and LED white light. Tip: Do not use it on a live circuit, so as not to damage the tester!

Popular Categories on BuyBestBrands.in