Wall Plates By Dunzy

• What You Get: the package comes with 2 pieces of stainless steel outlet covers, each wall plate is equipped with 4 screws, a total of 8 screws, enough to meet the needs of the use and replacement for outlet receptacles in your home
• Size Information: metal outlet cover is about 4-9/16 inch/ 11.59 cm in length, about 4-31/64 inch/ 11.43 cm in width, about 13/64 inch/ 0.53 cm, the hole diameter is about 2-31/64 inch/ 6.3 cm, suitable for most outlets; Please confirm the size information before purchasing
• Stainless Steel Material: the wall plates for electrical outlets are made of 304 stainless steel, which is firm, tough and reliable, can withstand strong impact and high temperature, and not easy to fade or wear, and will serve you for a long time
• Easy Installation: there are 4 small holes around the big hole in the middle; You can use a screwdriver (not included) to fix the screws (included) and the outlet wall plate on the outlet, which is simple and convenient
• Widely Applied: the device receptacle wallplate is suitable for any residential, commercial or industrial application, and it is also very convenient to use at home, quick and simple to wipe with a wet rag in daily life

• Size and Material: the length of this dowel plate is about 15.2 cm/ 6 inches, the width measures about 5 cm/ 2 inches, the thickness is about 1 cm/ 0.39 inch, compact and portable; The dowel plate is made of steel material, which is precision machined and ground for high wear and corrosion resistance
• Practical Design: both ends of the dowel maker are reserved with screw holes for easy fixing on the workbench; The diameter of the bottom of the holes is larger, which can reduce the friction when the pins pass through each hole and easily cut the pins
• Board Application: each steel dowel plate has 17 holes, from 1/8 inch to 5/8 inch, in 1/32 inch increments, to meet your needs for making custom dowels out of hardwood, softwood and more; The benefit of drilling holes in small increments is that the operation requires minimal shock, and the nails can be easily resized starting from a slightly larger diameter
• How to Use: prepare a tough hammering tool and a space for the wooden nails to enter; Fix the dowel plate on the workbench, and cut the blank with a chisel until you find the straightest grain, otherwise the nails will not be straight; Cut off 4 corners of the front end of the blank, find the most suitable hole and tap it with a tool to pass through the dowel plate, then move the blank to the next hole and repeat the previous step until you achieve the effect you want
• Warm Note: this steel plate can make up to 6 inch pins, the smaller the hole, the shorter the length of the pins

Popular Categories on BuyBestBrands.in