Wood Coating By Berger

• Dual Usage: Meant for both Interior & Exterior wood.
• Very Easy to Apply: Can be applied by cloth,does not need a spray gun.
• Ready to Use Product: Open the lid & Apply, if required GP thinner can be added.
• This product is Versatile and Ease of Application.
• It has Diverse Functions and has Green Pro Certified

• Versatile
• Ease of Application
• Diverse Functions
• Green Pro Certified

• Unique Patterns
• Easy Application
• High Glittering Effect
• Green Pro Certified

• Package Contains: Luxol Hi Gloss Metal & Wood Paint-Po Red
• Surface Preparation: Initially sand the surface with coarse sand/water paper according to the type of surfaces to remove rust, dust and other loose/unwanted particles. Wipe the surface clean. Luxol High Gloss Enamel offers a mirror like gloss which can be used both for exterior and interior surfaces mainly on mild steel, wooden and suitably prepared masonry surfaces. Formulated with alkyd and select colourants, it gives a long lasting glossy finish to every surface it touches.
• Priming: Apply one coat primer after proper thinning and allow the paint to dry fully. Sand the surface again with less coarser sand/water paper lightly and wipe clean. Apply 2 coats appropriate primer giving overnight interval between the coats. Sand it again with Water Paper No. 220/280. For wooden and metal surfaces apply 1 coat of Luxol Speed Coat Primer Surfacer with proper dilution and for wall surfaces apply 1 coat of solvent-base cement primer with ideal dilution. Allow it to dry fully. Sand the painted surface with Water Paper No. 80/400 lightly to make the surface smooth/undulation free.
• Top Coat: Before application of top coat, dilute the paint as mentioned above and strain it through clean cloth. Ensure the painting brush and mixing container are absolutely clean. Apply Luxol HG 2 to 3 coats to get rich, smooth, and high-gloss finish giving overnight interval between the coats. Use felt roller to get an orange peel effect. Ensure surface pH value is within 7-11. Luxol Hi-Gloss enamel should not be used on damp surfaces or substrates subjected to continuous seepage.
• Disclaimer for all shade-related products: While scientific tools have been used to match shades on screen to the shades you will see in actual, yet there is likely to be a difference- the shades displayed on this site are indicative and are not precise representations of actual paint colours due to variance in monitor/phone screen calibrations (brightness, contrast, etc) and resolution as well as screen settings. There may also be variation in the shade which is finally applied on the required surface due to natural and artificial lighting, darkness of the colour, surface condition and surface finish besides many other factors.

• Package Contains: Luxol Hi Gloss Metal & Wood Paint-Gold
• Surface Preparation: Initially sand the surface with coarse sand/water paper according to the type of surfaces to remove rust, dust and other loose/unwanted particles. Wipe the surface clean. Luxol High Gloss Enamel offers a mirror like gloss which can be used both for exterior and interior surfaces mainly on mild steel, wooden and suitably prepared masonry surfaces. Formulated with alkyd and select colourants, it gives a long lasting glossy finish to every surface it touches.
• Priming: Apply one coat primer after proper thinning and allow the paint to dry fully. Sand the surface again with less coarser sand/water paper lightly and wipe clean. Apply 2 coats appropriate primer giving overnight interval between the coats. Sand it again with Water Paper No. 220/280. For wooden and metal surfaces apply 1 coat of Luxol Speed Coat Primer Surfacer with proper dilution and for wall surfaces apply 1 coat of solvent-base cement primer with ideal dilution. Allow it to dry fully. Sand the painted surface with Water Paper No. 80/400 lightly to make the surface smooth/undulation free.
• Top Coat: Before application of top coat, dilute the paint as mentioned above and strain it through clean cloth. Ensure the painting brush and mixing container are absolutely clean. Apply Luxol HG 2 to 3 coats to get rich, smooth, and high-gloss finish giving overnight interval between the coats. Use felt roller to get an orange peel effect. Ensure surface pH value is within 7-11. Luxol Hi-Gloss enamel should not be used on damp surfaces or substrates subjected to continuous seepage.
• Disclaimer for all shade-related products: While scientific tools have been used to match shades on screen to the shades you will see in actual, yet there is likely to be a difference- the shades displayed on this site are indicative and are not precise representations of actual paint colours due to variance in monitor/phone screen calibrations (brightness, contrast, etc) and resolution as well as screen settings. There may also be variation in the shade which is finally applied on the required surface due to natural and artificial lighting, darkness of the colour, surface condition and surface finish besides many other factors.

• Dual Usage: Meant for both Interior & Exterior wood.
• Very Easy to Apply: Can be applied by cloth,does not need a spray gun.
• Ready to Use Product: Open the lid & Apply, if required GP thinner can be added.
• This product is Versatile and Ease of Application.
• It has Diverse Functions and has Green Pro Certified

Popular Categories on BuyBestBrands.in