uxcell Combination Drill and Tap Bit, 1/4" Hex Shank M8 x 1.25 Metric Uncoated High Speed Steel 4341 Spiral Flute Drilling Tapping Tool Extra Long - Product Features
- Combination Drill and Tap Bit: Thread Size: M8 x 1.25; Hex Shank Size: 1/4\". Combination drill and tap bit set can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.
- Wide Applications: Suitable for processing blind holes. Used for tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- Features: Self-centering point, do not need assistant center drilling or center punching. Quick change 1/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping.
- Coating: Features just the base substrate without any coatings, good for most general purpose thread tapping. High speed steel tool has high hardness and toughness, wear resistance and heat resistance.
- Tips: Use on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
DelitonGude 10.0mm Extra Long 100mm Carbide Tungsten Square CNC End Mill,4 Fultes Suitable for Alloy Steels/Hardened Steels HRC55(Extra Long 10.0mm) - Product Features
- 1.PREMIUM QUALITY - The micro grain carbide cutters are made of micro tungsten steel bar, which polished and with sharp edges, featured with high hardness, high bending resistance and abrasion resistance.
- 2.HIGH PERFORMANCE - Sharp edge angle, smooth cutting, flute spacing and helix flutes, process the heat treatment materials with high speed, reduce changing times and improve the production efficiency.
- 3.ANTI-VIBRATION - The rounded and smooth chamfered contour end mill bits can effectively reduce the vibration to provides stability, improved chip disposal and the processing quality.
- 4.CUTTING EDGE DESIGN - 4 flutes CNC router milling cutter with 45 degree spiral dual edge belt design, large front angle effectively reduces cutting resistance, convenient for chip flute removal, effectively reducing product chipping and wear
- 5.WIDE APPLICATION - These micro solid carbide drill bits are suitable for Deep slot, profile milling,side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, etc.
Dry Diamond Core Drill Bits 1-3/8 Inch (35mm) Tile Hole Saws for Porcelain Ceramic Tile Marble Brick Vacuum Brazed Hole Saw with 5/8-11 Thread and 3/8 Inch Hex Shank Adapter - Product Features
- Specifications: Diameter 1-3/8 inch(35mm); Connection: 5/8 -11 arbor
- Compatibility: built with 5/8\"-11 threading female arbor for compatible with to most of the popular Angle Grinders, wet polishers and hand-held drills
- Versatile: Great for drilling clean holes to hard materials especially tiles, porcelain glass, ceramic, porcelain, porcelain tile, limestone, slate, marble, granite (Not recommended for concrete with reinforcement or hard materials.)
- Cutout design: Side flutes help to remove debris and drill holes smooth and fast, reduce noise and improve work efficiency
- Worry Free: If you encounter any problems in using the products, please feel free to contact us for satisfactory customer service
Bonbo Hpop Test Tool Kit High Pressure Oil for DT466 DT530 Compatible with International MaxxForce DT9 DT10 1996-2015 - Product Features
- Perfect Fitment This kit is compatible with DT466 DT530 and International MaxxForce DT9 DT10 1996-2015.
- Simple Operation As the connection between the Hpop hose and cylinder head, this kit helps you efficiently troubleshoot the high pressure oil system at ease.
- Multiple Functions This kit with multiple functions and high integration can be used for running shop air directly to the head for a leak test, running a pump deadhead pressure test, reading pressure while cranking, reading pressure while engine is running. It is precisely manufactured and tested to meet original equipment standards and performance.
- Product Specification 6,000 psi Gauge,?5,800 psi Eaton Weathershield hydraulic hose, Burst rating 23,200 psi.
- Satisfaction Guarantee If you're not satisfied with the kit, simply return for a full refund in 30 days or get a replacement during 1 year warranty via our customer service.
Core Drill Adapter 5/8"-11 Male to 3/8" Shank for Core Bits - Product Features
- INDUSTRIAL STEEL - designed with industrial grade heat treated steel to extend product lifetime
- ADAPTER - 5/8\"-11 Male to 3/8\" Shank Female
Wire Cutting & Stripping Machine, Fully Automatic (Expandable Twist Function) Global WCS-02 - Product Features
- SALIENT FEATURE: CAN PROCESS 2 WIRES AT ONE TIME
- I/P SUPPLY & POWER: 230V AC ?10%
- MAX. CONDUIT DIAMETER : ?4.5mm
- CUTTING LENGTH : 5 ~ 9999mm
- MAX. MID STRIP SECTION : MAX. 8 CUTS
- DRIVE MODE : 4NOS. OF WHEEL DRIVES
- WIRE TYPES : SUITABLE FOR WIRES, SUCH AS PVC, TEFLON, GLASS WIRES, ETC.
METDRILL German Technik Annular Cutter for Magnetic Drilling Machine. TCT Broach Core Cutting Tool. Tungsten Carbide Tip Core Drill. Length 55 mm x Diameter 21 - Product Features
- METDRILL - German Technik registered at German Patent and Trademark Office, Germany. Carbide Tip Premium Annular Cutter (TCT). Ideal for drilling with magnetic drilling machines and conventional drilling machines.
- 55 mm cutting length. Full flute design cutters help easily remove chips from the cutters, less friction, and proper flow of lubrication, thus resulting in an increased life of the cutter.
- FREE one ejector pin (pilot pin) per cutter. Carbide tips from a well-known manufacturer in Sweden.
- Extra long service life. It makes 25% more holes than other brands of annular cutters, thanks to the new geometry.
- Weldon Shank 19 mm. High quality of Weldon shank which is manufactured by grinding process and not by machining process. Grinding of the Weldon shank makes the shank stronger and vibration free.
Wilsnsun 2PCS 3 Teeth T Shape Tongue and Groove Router Bit Set with 1/2" Shank, Routers Bit Tool Set Adjustable Wood Milling Cutter for Cabinet, Shelves, Doors, Woodworking Tools - Product Features
- Shank Diameter: 1/2\", Tooth width: 1/4\", Tooth depth: 1/2\". Processing template thickness: 13-19mm.
- Material: C3/YG3 Tungsten Carbide Cutters, anti-Kickback Design, for long-lasting performance. Pattern: 3 Teeth T Shape Wood Milling Cutter.
- Applicable: Fits most mortising JIGS, for both table mount and handheld ROUTER. Suitable for woods, MDF, solid wood, particle board, plywood, wooden door/window frames, wooden cabinets and boxes, avoid cutting metal and non wood materials, such as: steel, iron, sand, etc.
- Package included: 1x Tongue Router Bit, 1x Groove Router Bit
- Note: Push slowly, RPM<18000 is recommended, for safe operation, clamp to at least 3/4 of the router bit shank.
PO-045 Set (Deburring Drill Bit 34mm-54mm) - Product Features
- Easy to work- Attaching the deburring external chamfer tool to the end of your power drill, Use the lowest speed on the drill bit, and then slightly applying pressure to remove the burr.
- Cost-Effective- These deburring external chamfer tool can be used for repairing damaged bolt and tightening the nuts in place. You do not need to spend time and money to find hard-to-find or expensive replacement bolts.
- Safety Design- Quickly repairs damaged bolts and tighten the nuts in place without hurting your hand, no sparks, and no burns; Simplifies the repair process.
- Using proper speeds and feeds-Drill use 0-60 RPMs. Fit Size 1-3/8\" to 2-1/8\"(34mm-54mm)
- Widely Application-Effectively used in Stainless Steel, Hardened Steel, Mild Steel, Copper, Brass, Aluminum, Fiberglass, Wood, Plastic.
MAXTOOL 6.8mm Metric 5pcs Jobber Length Twist Drill Bits HSS M2 Fully Ground; JBM02H10R068P5 - Product Features
- Drills conform to ASME/ANSI B94.11M standards or USCTI - United States Cutting Tool Institute (formerly MCTI)
- Drills are fully ground, 135 Degree Chisel point with split point
- Black and Brazen Dual Color Surface Finish
- Premium High Speed Steel M2
- Jobber Length Twist Drill Bits with Straight Shank for metal, plastic, and wood etc
MAXTOOL 15/32"x6" 2pcs Aircraft Extension Twist Drill Bits HSS M2 Fully Ground; ACF02B06R30P2 - Product Features
- Drills conform to ASME/ANSI B94.11M standards or USCTI - United States Cutting Tool Institute (formerly MCTI)
- Drills are fully ground, 135 Degree Chisel point with split point
- 6 inch overall length
- Black oxide surface finish
- High Speed Steel M2 Aircraft Extension Drill Bits with straight shank
MAXTOOL No. 5 Dia 0.2055" Wire Gauge 2pcs Jobber Twist Drill Bits HSS M35 5% Cobalt; JBN35G10R05P2 - Product Features
- Drills conform to ASME/ANSI B94.11M standards or USCTI - United States Cutting Tool Institute (formerly MCTI)
- Drills are fully ground, 135 Degree Chisel point with split point
- Golden Surface Finish
- High Speed Steel M35 5% Cobalt
- Jobber Length Twist Drill Bits with Straight Shank are used for cutting metal, plastic, and wood etc
MAXTOOL 13/64" 5pcs Identical Jobber Length Twist Drill Bits HSS M2 Fully Ground; JBF02H10R13P5 - Product Features
- Drills conform to ASME/ANSI B94.11M standards or USCTI - United States Cutting Tool Institute (formerly MCTI)
- Drills are fully ground, 135 Degree Chisel point with split point
- Black and Brazen Dual Color Surface Finish
- Premium High Speed Steel M2
- Jobber Length Twist Drill Bits with Straight Shank for metal, plastic, and wood etc
MAXTOOL No. 40 Dia 0.098" Wire Gauge 5pcs Jobber Twist Drill Bits HSS M35 5% Cobalt; JBN35G10R40P5 - Product Features
- Drills conform to ASME/ANSI B94.11M standards or USCTI - United States Cutting Tool Institute (formerly MCTI)
- Drills are fully ground, 135 Degree Chisel point with split point
- Golden Surface Finish
- High Speed Steel M35 5% Cobalt
- Jobber Length Twist Drill Bits with Straight Shank for metal, plastic, and wood etc