Snapmaker CNC Bits (5 Bits) - Product Features
- High strength and hardness, durable in use
- Chatter resistant design for superior surface finishes
- Sharp cutting reasonable matched with high strength of cutter
- Made of alloy steels/hardened steels, durable and practical to use
- Application for wood, MDF, HDF, solid wood, epoxy board, PVC, plastic
10PCS, 5/32" x 7" SDS Plus Hex Rotary Hammer Drill Bits for Concrete Screw, Rotary Drill Bit 5/32, SDS Plus Bits - Product Features
- Material: These concrete drill bit set made of Tungsten carbide, harder, tougher, and more resistant. Bit tip with braze and hardening process for long life.
- SDS Plus Rotary Drill Bits Widely application: Suitable for Masonry, Cement, Ceramic Tile, Brick, Block, Concrete. etc. These drill bits can use with electric or cordless hammer drills for home decoration, walls perforation, wire switch installation. etc.
- Finish: Optimized brazing and hardening process for long life.
- The special 1/4\" HEX Shoulder for use with standard concrete screw installation sleeves, which eliminate the need for drill adapters
- Size: 5/32 x 7\"?10PCS
12 PCS,3/16", HSS Black and Gold Coated Twist Drill Bits, Metal drill, ideal for drilling on mild steel, copper, Aluminum, Zinc alloy etc. Pack in Plastic Bag - Product Features
- Bright finish: Classic M2 High Speed Steel construction with Bright Finish for proven capability and durability.
- Strength & Hardness: Made with HSS M2 steel, Rock wall Hardness Level HRC 62-63.
- Package & Size: 12 Pieces in a plastic bag, Diameter 3/16 inch, Total length 3-1/2 inch, Working length 2-5/16 inch.
- Professional & DIY Use: For use on metal, wood & plastics. Not For Use On Concrete / Masonry / Stainless Steel. Perfect match for workshop or service vehicles.
- 135 Tip & Twist Design: Increases cutting speed with self-centering and prevents walking, clears chips and particles faster.
Carbide endmill cutter 10mm - Product Features
- It is a precise tool for rough milling, can be used to cutting into work piece for slotting
- The end mill cutter is widely used for machining of d2, steel, dai steel
CS Unitec 6-1-468 2-1/8" x 4" High-Speed Steel Unibroach Annular Cutter 2-1/8" Cutting Diameter High Speed Steel Uncoated (Bright) Coating Cut Cutting Angle 4" Flute - Product Features
- Cnc precision ground for fast penetration, accuracy and long life
- Flutes run the length of the cutter for efficient chip clearance, increased drilling productivity and decreased cutter breakage
- Drill holes 3 times faster than twist drills
- Produce reamed-quality burr-free holes and solid slugs
- Made in germany
MaxTool 3/8-24 HAND THREAD TAP SET; 3-Piece (Taper, Plug, Bottom); HSS M2; FULLY GROUND RIGHT HAND; HSF02W00R024F - Product Features
- Premium High Speed Steel M2
- Normal Diameter: 3/8\"
- Pitch: 24 TPI
- Round Shank With Square Driver for General Application
- Surface Finish: Bright
MT2 Live Center, MT2 Precision Rotary Live Revolving Milling Center Taper Metal Work Lathe Tool for High Speed Turning, CNC Work - Product Features
- Premium T10 Steel Material:The conical part of MT2 live center is made from T10 steel, quenching hardness 60 to 62 HRC, the main body part is made from high-quality steel, durable to use.
- For High Accuracy:High quality bearing design, using high speed bearing for high accuracy.
- Dust Proof Seal:MT2 live center uses dust proof seal preventing that can cut dust enter into bearing thus prolong service time.
- Practical Design:Designed for lathe in medium speed and medium load environment.
- Effect to Work:Well balanced and smooth for effective turning. Ideal to support your work at the tailstock end of your lathe.
HSS Cobalt Drill Bit Double End 1/8 in. Stubby Body Drill Steel Metal Iron-10Pcs - Product Features
- DOUBLE END DRILL BIT SIZE : ?1/8\"(Diameter)?x 5/8\"( Flute Length)?x 2\"?(Overall Length)
- MATERIAL : HSS Cobalt Material is the best hardened material for drilling longest life
- DOUBLE END CUTTING POINT :The 2 cutting point of one single drill bit, when one cutting?point is used bored and the other cutting end can be used, as another new?drill bit.
- quicSPLIT POINT 135 DEG. ANGLE :?No center punch is needed-- the aggrevsive 135?Deg. Split Point quick-cut points are self-centering and penetrate quickly with less?pressure.k-cut points are self-centering and penetrate quickly with less?pressure.
- APPLICATION : Drill through stainless steel, general steetl, metal sheet, iron, copper, aluminum, plastic ?
1/4-Inch Shank 5/8-Inch Cutting Dia 2 Flute Carbide Tipped Round Shank Cleaning Bottom Router Bit Wood Cutter - Product Features
- Industrial Quality Bottom Cleaning Router Bits
- 1/4 inch shank and 5/8 inch cutting diameter
- Carbide cutters, solid hardened steel bodies with Anti-Kickback Design
- Use on CNC and other automatic routers
- Featured with double flutes, straight shank.Overlapped carbide produces a smooth flat bottom cut.
Amana Tool AMS-177-K 8-Pc CNC Router Bit Collection Featuring V-Grooves, Point Roundover and Multi-Purpose Spektra Bits, 1/4 Shank - Product Features
- Made in USA
- Advantages of Spektra Coating: nACo coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Coatings prevents high heat and oxidation which is detrimental to cutting tool performance Multi-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective. nACo offers approximately 4,500 Vickers for impressive solid hardne
- SPECIFICATIONS: (d) Shank: 1/4
uxcell 5PCS 1/8" Shank 3.0mm x 12mm Carbide Flat Nose End Mill Cutter CNC Router Bits 2 Flute for Acrylic PVC MDF Hardwood - Product Features
- 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8\"; Cutting Diameter: 3.0mm / 0.12\"; Cutting Length: 12mm / 0.47\"; Overall Length: 38mm / 1.5\"; Number of Flutes: 2 Flutes
- Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines.
- Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground.
- Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use
- Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life.
Handheld T Shape Tapered Hex Reamer Bridge Pin Hole Carbon Steel, Handle Drilling Tool for Taper Holes on Top of Planks, Chamfering, Screw Sinking Holes - Product Features
- Premium material - Made of high quality carbon steel with precision cutting edges.
- Function - Suitable for taper holes on top of planks, chamfering, easy screw sinking holes. A drill bit can replace a chamfering knife.
- Leverage - The reamer is equipped with a T-handle that provides extra leverage to help keep the hole round and easier to ream.
- Lightweight - The product is lightweight and makes it easier to get the job done.
- Removable Handle - This product has a removable handle for easy storage and carrying.
YXQ 10Pcs 1.1-2.0mm Carbide CNC Drill Bits Engraving Micro Set Tip Spiral Flute PCB Rotary Tool Jewelry Print Circuit Board - Product Features
- Set of 10 different size: 1.1mm,1.2mm,1.3mm,1.4mm,1.5mm,1.6mm,1.7mm,1.8mm,1.9mm,2.0mm, different size for meeting your needs
- Cemented carbide material with excellent cutting performance,High hardness, high wear resistance, high strength
- 1/8'' Shank Diameter, Overall Length: 38mm
- Widely use for PCB, SMT, CNC, Mould, Plastic Fiber, Carbon Fiber,Super Hard Wood, printed Circuit Board etc.
- Package include: 10Pcs Carbide End Mill,1Pcs box
Excel Impex Drill Bits for Glass Bottles-3 mm Dia (1 Pair) - Product Features
- Excel Impex glass drill bit is an ideal tool for drilling glass bottles
- Drills ample holes with precision depending on hardness and thickness of the bottles being drilled.
- Fits on all hand held drilling machines available in the market.
- Use water as coolant and lubricant. Do not use without water. Dimensions-3 mm Dia (1 Pair)
DIY Crafts Pack of Tiles Hole Saws & Accessories Marble Glass Diamond Coated Core Hole Saw Drill Tools Bit Set Hole Saw Sets - Product Features
- Rustless & Durable: Made of high strength Carbon Steel with smooth nickel plated surface to extend the service life Meet most of your different needs.
- 13 Sizes(Diameter): 6mm(1/4\"), 8mm(5/16\"), 10mm(3/8\"), 12mm(1/2\"), 14mm(9/16\"), 16mm(5/8\"), 18mm(11/16\"), 20mm(3/4\"), 22mm(7/8\"), 25mm(1\"), 32mm(1-2/5\"), 40mm(1-1/2\"), 50mm(2\"). Meet most of your different needs.
- Quick, Sharp & Smooth Cut: Tip Head coated with High quality Diamond to enhance the drilling speed and creates a sharp, high precision and smooth cut with no broken edges In Seconds.
- Application: Drilling holes for Glass, Tile Bottles, Blocks Jars, Fiberglass Porcelain Tile Ceramic, Slate Mable, Granite Light Stone
- Note: Please keep the speed in 800-1000 per minute, keep adding water to keep the drill cool, strictly prohibit from dry drilling
Excel Impex Bottle Art tool kit- bottle cutter and bottle drill bits (2 mm, 3 mm) - Product Features
- Excel Impex brings you bottle art kit for cutting and drilling on glass bottles to create unique designs of your choice
- Diamond coated tip of Bottle cutter blade enables easy cut on bottles along any straight path.
- Well graded industrial diamond grit on drill bits lets you make perfect holes with precision depending on hardness and thickness of the bottles being drilled.
- Convert trash glass, beer/ wine bottles into decorative vases, bottle art, candle stick holders, cups, flower pots, pencil holders, jars, etc. and make gifts, home decorations
- Technical Specifications of bottle cutter :- 4\"- Diameter , Thickness 1 mm, Bore 16 mm, Grit 80/100 U S Mesh, Construction: Spring Steel, RPM : 12000, Weight:80 gm. Drill bits- 2 mm, 3 mm