INSIGNIA LABS - PIEZO VIBRATION TOUCH SENSOR BASED LIGHT/BULB CONTROL KIT PROJECT - SCHOOL COLLEGE ELECTRONIC PROJECT - Product Features
- Complete Assembled & Tested Kit with 100% Output Guarantee
- Includes Project Circuit, Abstract & Explanation
- Includes Battery & Storage Plastic Box
- No Logo/Trademark on the PCB
- Used for Educational Purposes
Prakti L298N 2A Based Dual DC Motor Driver Module with PWM Control - Product Features
- Driver chip: L298 dual H-bridge driver chip., Operates up to 35V DC Drive part of the peak current Io: 2A / Bridge
- Logical part of the terminal power supply range Vss :4.5V-5.5V Logical part of the operating current range: 0 ~ 36mA Maximum power consumption: 20W
- Heatsink for better performance. Power-On LED indicator.
- Over-Current Protection (A) Yes
- No. of Channels 2
0STI 02 Sky Technology India Pt 100 temperature Sensor Aliment (1 Set In 10 Nos.) - Product Features
- pt 100 temperature eliment clss B made in japan
MMOBIEL Anti-Static Non-Slip Magnetic Silicone Repair Mat, Multi Work Station Soldering Mat (45 x 30 cm) 680g (Blue) - Product Features
- High Quality Product by MMOBIEL: Each part is tested before shipment, Item in Stock .
- High Quality Kit: This MMOBIEL Anti-Static Non-slip Magnetic Silicone Repair Mat is made of high quality non Toxic silicone, can resist high temperature of 500 degreeC /932? Heat Resistant and protect from Burn and ruin. Multi Work Station, the Soldering or heat gun can work in the Mat directly .
- This Silicone work Station mat is Insulation, Retardant, Anti-skid, Anti-static, Anti-corrosion, Magnetic Storage, Odorless, and is Foldable. Size (45 x 30 CM) / (11 x 17) inch 680g.
- Compatible with: Perfect to use as desk mat for soldering station; including screw tray; hand tool accessories; electronics assembly or electronics and circuit board repairing. Repair mat for Mobile phone, Tablet, watch, glasses, laptop, computer, camera, carving handmade etc.
- New Professional design with classification: The grooves, anti-slip surface, magnetic notches and 3 cases of parts, keep parts and screws etc away from loss. Built in Scale Ruler 0 36 CM and 124 screw positions and magnetic notches for efficiently classify your screws and small parts.
- You can focus on your work and keep your Work Platvorm clen and tidy. Special surface easy to clean, Soldering Paste, instant glue and other remains. High quality product by MMOBIEL: Each part tested before shipment, Item in Stock Shipped by AMAZON Australia
Easy Electronics 2 Pcs IR Proximity Sensor for line follower and Obstacle sensing Robots - IR Sensor - Product Features
- Range : 10-15 cm|2.Input supply voltage: 5v dc|3.Three pin burg male header for easy interface. |4.Comes with an easy to use digital output pin|5.2.5mm diameter hole for easy mounting.|6.5v operated, easy to interface with wide range of micro-controller, like arduino, avr, arm, 8051, pic, msp430 etc.
- Digital output. Output voltage for logic one(+3.5v) and logic zero(0) 0.0v interface with arduino, avr, 8051, pic, arm, msp430 (green)
- Package content: easy electronics ir proximity sensor for line follower and obstacle sensing robots (2 pcs)
INVENTO 8Pcs RFID Card 13.56mhz Inductive Smart Integrated Circuit Card RC522 IC Card DIY Compatible - Product Features
- Material: Polyvinyl chloride (PVC); Size(approx.): 85.5 x 54 x 0.8mm
- Operating frequency: 13.56 MHz; Capacity: 1KB=8KBYT=1024BITE;
- Read Range:3-10cm ( be related to the card reader); Data Transmission Speed: 106 Kboud
- Rewitable: > 100,000 times; Data Retention: > 10 years; Applications: Increasingly used in identity authentication, banking, telecom, public transport, car management, etc.
- Package Include: 8 x RFID Card
INVENTO 2Pcs 400mm (0.4 mtr) SS304 Threaded Rod M6 6mm OD + M6 nut 1mm Pitch 6mm T Nut Brass round Flange Single Nut for 3D Printer CNC Robotics - Product Features
- Nut Material: Brass; Thread Type: M6 Metric Thread; Pitch: 1mm; Inside Diameter: 6mm
- Rod Length: 400 mm (0.4 meter); Pitch - 1 mm; Material: SS 304 (Stainless Steel)
- Note: Threads are Metric M6, not 6mm TR6 Lead Screw. Please contact us before order for any doubt.
- Application: 3D Printer, CNC, Robotics, DIY Projects etc
- Package Include: 2 x M6 T-Nut, 2 x 400mm M6 Threaded Rod
DiT LAB 12 x 12 inch (30cm x 30cm) Copper Clad FR4 GLASS EPOXY (Single Sided)-1 piece By DiT LAB - Product Features
- PCB, clad, copper, copper cladd, printed circuit board, electronic ckt
- Copper clad fr4 glass
- It is Single Sided
DHT22 Temperature and Humidity Sensor Module - Product Features
- Model: AM2302
- Operating Voltage: 3 - 5.5V, Humidity measurement precision: ?2%RH
- Accuracy resolution: 0.1%, High precision, Capacitive type
- Humidity range: 0-100%RH
- Temperature range: -40-80 degreeC, Temperature measurement precision: ?0.5 degreeC
Parijata liquid control float switch Water Tank Level Liquid Float Switch Level controller Float Switch, Float Level Controller for water tank, Float switch, Water purifier 220Volts AC - Product Features
- Endurance: =500,000 times of wire and Plastic Body Electrical
- Rated voltage: 250 Volts and Rated current: 16A/Contacts: NO+NC. Also works on 24 Volts DC.
- Cable: 3 Meter / A float switch is a device used to detect the level of liquid within a tank. The switch may be used in a pump, an indicator, an alarm, or other devices and Use: Water Level, liquid level Controller
- Long life (approximate 10 million operations) & Rust proof (entire sensor body in polypropylene) High Quality Float switch with 3mtr ISI Cable. you can add extra cable as per need's.
- Easy to install in any tank just hang down and connect with on/off switch to cable, when tank full it go up (switch off) and when tank empty it's down (switch On).
- It's Corrosion Free, ISI cable, Sturdy and durable & need no maintenance, No current / voltage is passed through water, therefore no electrolysis or Salt deposition.
- 6 months warranty for manufacturing Defect (Repair or Replacement)
2.54 mm Crimp Terminal Male Dupont Style - Pack of 10 - Product Features
- Contact Material: Tin Plated Phosphor Bronze; Connector: Male
- Current rating: 3A; Voltage rating: 150V
- Contact Resistance: <30 M; Wire Gauge Accepts: 22 ~ 28 AWG
- Pitch: 2.54mm
- Packaged by:- Sharvi Technologies (OPC) Pvt. Ltd.; Address:- #09, CK Nagar, AECS layout, Hosa Road, Bangalore-560100
Techtonics D1 Mini V2 NodeMcu 4M Bytes Lua WIFI Internet Of Things Development Board Based ESP8266 - Product Features
- This is D1 Mini V2 NodeMcu 4M Bytes Lua WIFI Internet Of Things Development Board Based ESP8266, it is a mini WIFI board based on ESP-8266EX.
- 11 digital input/output pins, all pins have interrupt/PWM/I2C/one-wire supported(except D0) 1 analog input(3.3V max input) and a Micro USB connection.
- The development board features WiFi-SoC ESP8266 and is made for fast Internet-of-Things (IoT) prototyping.
Quad Store Project Basic R3 Starter Kit compatible with Arduino IDE - Product Features
- Quad Store - Project Basic Starter Kit with compatible uno r3 for beginners
- Check out for brand name quad store, qr scan code and hologram in the retail package to verify authenticity of the product
- Note: Includes quaduino uno r3 board - high quality compatible Uno R3 board. Kindly refer listing picture for details.
- Skill level: Beginners/starters
- Package includes: Individual components in retail box, starter guide and source code to be downloaded using the link provided in the kit, parts reference chart and list for easy identification
YaeTek 24V DC 350W Permanent Magnet Electric Motor Generator DIY for Wind Turbine PMA - Product Features
- This motors are used in diverse applications including robots, electric scooters, and electric bicycles.
- 24V Permanent Magnet Motor Generator for Wind Turbine PMA.
- Installment pitch of holes:42-95(4 holes).
- 24V Permanent Magnet Motor Generator for Wind Turbine PMA. This is achieved by the use of four brushes and advanced electromagnetic computer modeling and design.
- The shaft rides in two high-quality ball bearings.
INVENTO 2pcs EN31 Rustproof Steel Smooth Rod 10mm OD 600mm (0.6 mtr) Long for CNC Robotics Machines DIY Projects - Product Features
- Outside Diameter: 10mm
- Length: 600 mm (0.6 meter)
- Material: EN-31 (Hard Chromed)
- Qty: 2pcs
- Application: 3D Printer, CNC, Robotics, DIY Projects etc
AVS COMPONENTS BreadBoard Wire 22 Gauge Wire Hookup Wire Jumper Wire 5 Color Combo (Pack Of 25 meter) - Product Features
- Colors: Black, Red, Yellow, Green, Blue,
- Used for Bread board, Electronic Lab Purpose, Electronic Project and Craft Purpose
- 25 Meter 5 Color wire In A Pack