41f hall effect sensor Bipolar Hall Effect Sensor Switch Hall Element Magnetic Detector 3 Pins Sensor For Electric Vehicle Motor Industrial Applications (Pack Of 10) - Product Features
- Model number is 41F, TO-92S, 0H41, SH41, SS41F, S41.
- 4.5 V to 24V operating voltage, used for electric vehicle or industrial motor.
- 25 mA output current works with most of open-collector.
- Operating temperature is -40 degreeC to +150 degreeC, 3 pins terminals length about 15mm/0.59inch.
- And also the ideal parts for electric bike or scooter brushless motor repair parts.
Prakti 170 Points Mini Breadboard SYB-170 White - Product Features
- Plug-n-play, Easy to use
- Use: experimental, testing, robot, Phosphor bronze nickel plated spring clips
- Matching jumper, diameter 0.8mm
- Components are easily interconnected using 20-28 AWG wire
- Adhesive-backed for permanent mounting.
Electronic Spices 27 Mm Diameter Piezoelectric Sensor Plate Pack of 20pcs - Product Features
- Converts Mechanical Force Into Electrical Output
- Impedance value : 500.
- Low soldering temperature.
- Strain sensitivity : 5V/??
- Package includes : 20 pieces
TechnoSam L293D Motor Driver Shield | Fully Soldered | Green Connectors | Stepper Motor | Servo Motor | BO Motor for Arduno Uno | Pack of - 1 | (Excellent Quality) - Product Features
- L293d Motor Driver Shiled has 2 connections for 5V ?hobby servos connected to the Arduinos high-resolution dedicated timer 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution) Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
- Pull-down resistors keep motors disabled during power-up Big terminal block connectors to easily hook up wires (18-26AWG) and power
- Arduino reset button brought up top 2-pin terminal block and jumper to connect external power, for separate logic/motor supplies
High Grade Magnetic Float sensors for Water Level Controller or Water Level Indicator (Four No's) - Product Features
- Magnetic float type sensors are maintenance free.
- Long wire length makes sensors suitable for tanks with height upto 3.5 meters
- Different color sensor wires for different levels to avoid any kind of confusion
- These magnetic float sensors are made using high grade stainless steel pipe and Abs float for maintenance free operation
- Four magnetic sensors are required in case five conduction sensors are used.
tinkRbox Starter kit 30+ DIY projects with development board, Ultrasonic, DHT 11, IR, Smoke sensor and also video tutorials - Product Features
- This Starter Kit includes 30+ DIY projects with Free Video tutorials and a Lifetime access.
- This Starter kit is a best gift for your children to learn programming by making several trendy DIY projects.
- With the guidance of video tutorials one can understand fundamentals of circuit connection, applications and use of electronic components.
- Live online assistance (Doubt solving session) and STEM accredited e - Certificate on completion of all the projects.
- For accessing Video tutorials and Codes, step-by-step instructions are mentioned in the kit box.
Vadda Bai soldering Iron Stand Holder Metal Support Station With 5 Solder Sponge and Solder Spool Holder - Product Features
- Package Content: 1 x Solder Iron Metal Stand, 5 x Soldering Iron Cleaning Sponges.
- This product is made of sturdy carbon steel, bright nickel plating. Multi-function, composed of a metal base and a metal stand, easy to assembly.
- Includes 6 sponge for tip cleaning
- Metal base for stability and durability
- Multifunctional soldering iron stand, convenient to hold your soldering iron.
Nyasta Three Phase 4G Smart Motor Controller - Product Features
- Best in market for remote operation of motor using mobile in 3 different modes(Timer, Scheduler & Manual)
- 4G supported device
- Device can be operated through Mobile Application & SMS
- For every operation (like ON, OFF, Power Loss, Dry Run etc.) acknowledgment messages will be sent
- Safeguards motor from voltage fluctuations and Dry Run
- Transaction history can be viewed in mobile application
- Complete Automation and remote management to eliminate labour and save time
xcluma Laser Beam Sensor Module Tube Laser Receiver Module Non-Modulator - Product Features
- PCB size:1.52cm x 2.22cm Working Voltage: 5 Volt DC Output: 4-5 Volt DC
- On detecting a laser signal, output goes at high level (5V) until laser signal is there. NOTE: This sensor is non-modulator, to be used indoors away from any bright light or direct sunlight.
Generic RB-1515316 D1 Mini Nodemcu 4M Bytes Lua Wifi Internet of Things Development Board Based Esp8266 - Product Features
- For fast iot prototyping
- It is flashed with the nodemcu firmware and can be set up and programmed right away with the on-board microusb connection
- The d1 mini is a mini wifi board based on esp-8266ex
INVENTO 2Pcs 51101 12mm Axial Thrust Ball Bearing 12x26x9mm Single Direction carbon steel ball bearing - Product Features
- Single direction thrust ball bearings consist of a shaft washer, a housing washer and a ball and cage thrust assembly. The bearings are separable so that mounting is simple as the washers and the ball and cage assembly can be mounted separately
- Bearing ID: 12mm, OD: 26mm; Height: 9mm
- Single direction thrust ball bearings, as their name suggests, can accommodate axial loads in one direction and thus locate a shaft axially in one direction. They must not be subjected to any radial load.
- Basic load ratings: Dynamic: 10.4 kN, Static: 15.4 kN; Speed ratings: Reference speed: 6700 r/min, Limiting speed 10000 r/min
- Package include: 2 x 51101 Axial Thrust Bearing
REES52 RC Li-Po Battery Fireproof Safe Guard Bag Charging Protection 290x230mm - Product Features
- Protect your home and valuables from a fire due to a Lipo battery failure with this Lipo-Safe bag
- Useful for storage, travel and during charging. The bag has an inner lining made from a woven fire retardant fiberglass material, which helps contain and greatly reduce any fires inside the bag.
- Silver tone oxford Material lipo battery safe guard charging protection waterproof bag pouch for rc model.
- Warning:never leave charging battery unattended.Allways ensure the battery is on a non-flammable surface.
- Product Name : RC Protection Bag;Fit for : RC Model Lipo Battery Size : 310 x 230mm/ 11.4\" x 9\"(L*W);Material : Oxford Material, Nylon Color : Silver Tone Weight : 118g Package : 1 x RC Protection Bag
Super Debug MQ-5 Methane LPG Liquid Propane Gas Sensor Module - Product Features
- Operating Voltage: 5V DC
- High sensitivity to LPG, natural gas, town gas.
- Small sensitivity to alcohol, smoke.
- Simple drive circuit.
- Fast response.
JPA Collections 1000 mm 20X20 4 T Slot Aluminium Extrusion Profile (Silver) - Product Features
- Cost-effectiveness
- Resistance to corrosion
- High strength-to-weight ratio
- Variety of size and shapes
- Variety of size and shapes
REES52 40PCs PCB Double-sided Prototyping PCBs Circuit Boards Kit | 5 Size Universal untraced perforated printed circuits boards | Solder-able Circuit Protoboards for DIY Soldering Electronic Projects - Product Features
- 100 % SATISFACTION GUARANTED Excellent quality and an empty canvas for electrical enthusiasts! An easy soldering; 0.1\" hole spacing for DIP integrated circuits and headers.
- THIS IS NOT YOUR NORMAL PERF BOARD! This board is much higher quality with plated-through-holes and annular rings that will not lift off the PCB under normal soldering conditions
- MUTI-PURPOSE General purpose prototyping circuit board for analog and digital use; With pre-tinned plated holes; Double sided board with plated-thru holes allows components to be easily soldered to either side of the board
- THE FLEXIBILITY OF HAVING CHOICES Great assortment with variety of size and perfect for quickly prototyping stackable circuits
- PACKAGE COMPONENT 40 Piece of double sided PCB prototype board in 5 different size (2x8 and 3x7 each 10 Pcs; 4x6 and 5x7 each 8 Pcs; 7x9 cm each 4 Pcs) with mounting holes or slots on each board corner
Svojas Soldering Iron Bit Round Flat Pointed Set Compatible for - 936, 937, 907 & other 900 Series, 5Pcs - Product Features