Industrial & Scientific Store - Robotics

• Jumper wires are easy to insert into or remove from these breadboards.
• Color:Red + blue + white + green + yellow
• Colored coordinates for easy component placement
• A terminal strip: Tie-point 170,Accepts a variety of wire sizes
• Material:ABS Features With 170 tie points With self-adhesive tape on the back

• Low forward voltage; High surge overload rating
• Ideal for printed circuit boards; High temperature soldering: 260 deg C/ 10 s
• Types from 600 V up to 1000 V VRRM; Not ESD Sensitive
• Repetitive peak reverse voltage: 1000V; RMS reverse voltage: 700V
• Operating and Storage temperature: -40 deg C to 150 deg C

• Avail upto 100% Amazon Pay CASHBACK | Cashback details will be available in the package
• Tested and 100% Working
• Internally Frequency Compensated for Unity Gain
• Large DC Voltage Gain: 100 dB
• Max Power Supply Voltage: ?32Vdc
• Max Differential input voltage: ?32V
• Low Input Offset Voltage: 2 mV

• VALUE PACK : Package include 100pcs male header pins.100 Pack male pins are adequate to use for a long time.
• SIZE : Pin Pitch :0.1 inches / 2.54mm; Number of pins: 40pin.Straight single row.Suitable for Arduino, Raspberry Pin or any other electronic project.
• ESSENTIAL ELECTRIC COMPONENT : Straight mounting, Single row, Male pin header, essential electric component, easy to use.Good quality header pins, header pins on 0.1 centers.
• CUTTABLE : They are easy to be cut to any length if needed.They are suitable for electronic project.
• APPLICATION : This connector is widely used in electronic circuit, electrical appliances, instrumentation ,PCB circuit board and so on.

• 2-pin connector cable set (Male and Female pair)
• 22 AWG stranded wire
• Connection Method: Male & Female ends push in and lock
• Material: PVC plastic
• Length: 3.5-inch (9 cm)

• Max. power rating : 10A
• WIDELY USED IN TRUCK CAR AND SENSORS
• Long life approximately 10,000 clicks

• Package Contents: 1 x Magnetic Float Sensor
• Liquid level Measurement in Hostile Environments
• For use in Many Toxic and Corrosive Chemicals
• Tanks where up to Three Switch Points are Needed

• 100% qriginal hakko bit.
• Pointed bit Size 5.0mm x 17mm.
• Sutable for Hakko-936,SLD-936,938 Bakon-936,938,937 Quick and other brand 936 soldering iron stations. Bit
• Bit Made In Japan.

• Inbuilt RGB LED
• ESP32-C3-MINI-N1 Based devboard
• Micro USB
• Buttons to BOOT and RESET
• CH340 Upgraded than the CP2102, making it fast and bounce free

• SM series JST connector
• Number of pin : 6
• Current rating : 3A
• Voltage rating : 250V
• Temperature range : -25 degreeC to +85 degreeC

• A detailed user manual/guidebook(PDF) with 25 lessons is provided.
• It is esay for you to learn UNO R3 Microcontroller and programming.
• Quick-responding technical support for free.
• Re-designed case, it is very beautiful, and it is a best gift for children.
• Arduino UNO R3 Microcontroller is included.

• Max Repetitive peak off-state voltage: 600 V
• Max RMS on-state current: 16 A
• Peak gate power: 20 W

• Size: 250x250x3 mm (LxBxH); Thickness: 3mm
• Material - Aluminium Alloy; Weight - 350 Grams
• There is a hole of 2mm on one corner of plate made in process of anodising of plates for surface finish. Plates may get little bend during transit.
• Plates surface finish may or may not be exactly same as shown in picture.
• Package Include 1 x 3mm Aluminium Sheet

• Number of channel : 16
• Operating voltage : 12V
• Trigger voltage : 12V
• Switching voltage : 250V at 10A
• 12V relay with AC contact capacity of 10A 250V and optocoupler protection

• Input supply voltage: 6V-24VDC
• The maximum output power: 240W
• The maximum continuous output current :5A;(Peak current 8A)
• The LED display the duty ratio 0-100%
• PWM frequency:16kHz Duty Cycle adjustable: 0%-100%

• Genuine 555 IC timer
• Turn-off time less than 2 ?s
• precision timing
• Astable or Monostable Operation
• TTL-Compatible Output Can Sink or Source up to 200 mA

Popular Categories on BuyBestBrands.in