Motherboard By REES52

• High Quality : 100% brand new and in good condition,with high quality ,great performance, solid construction.
• Camera Specifications:This pi camera is capable of 2592 x 1944 pixel static images,and also supports 1080 p @ 30 fps, 720 p @ 60 fps and 640 x480 p 60/90 video recording,with 5MP OV5647 1080p webcam sensor
• IR-CUT Camera : It's built-in IR-CUT camera,automatically switch day and night mode for better and clearer image during the day and night.
• Compatible With : Raspberry Pi camera module kit compatible with Raspberry Pi model B/B+/A+/4/3/2/1
• CSI Interface : This interface uses the dedicated CSI interface, via the CSI bus, a higher bandwidth link which carries pixel data from the camera back to the processor.

• RP2040 microcontroller chip designed by Raspberry Pi
• Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
• 264KB of SRAM, and 2MB of onboard Flash memory
• 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
• Package Included : 1 x Raspberry pico Board , 2 x Male Headder

• 3.5in 480x320 TFT LCD screen, high quality image display and wide viewing angle.
• Compatible with UTFT / UTFT_Buttons / Utouch Library for arduino.
• Provide 12 examples for Arduino and 3 examples of STM32.
• Compatible with Arduino-Series development Board, support Arduino Mega2560 Directly inserted.
• OnBorad level conversion chip for 5V/3.3V MCU, compatible with 3.3/5V operation voltage level.

• Use CH340G repalce the CP2102. Open-source, Interactive, Programmable, Simple, Smart, WI-FI enabled
• Aduino-like hardware IO
• Advanced API for hardware IO, which can dramatically reduce the redundant work for configuring and manipulating hardware
• Code like aduino, but interactively in Lua script

• LCD Blue Display 20 characters including letter, number and symbol in 4 lines on a large screen
• Working voltage: 5V; Contrast adjustable with a 50K potentiometer onside
• Bright backlight, displaying characters clearly
• Module dimensions: 97 x 59 x 12 mm; Viewing area size: 71 x 21 mm
• Fit for Arduino and other micro-controllers

• 3pcs/lot ESP32,It is 2.4GHz Dual Mode WiFi + Bluetooth Development Board
• Dual Core ESP-32 Antenna Module
• Support LWIP protocol, Freertos.
• SupportThree Modes: AP, STA, and AP+STA
• It can work with the Aduino IDE,Amazon Alexa.Control camera,Drive Nokia5110 LCD,etc.

• The Nextion Enhanced versions are more powerful. Compare to the basic Nextion displays, the new ones have added some new functions: support built-in RTC, support save data to Flash, support GPIO, larger flash capacity and faster CPU. The enhanced Nextion series has 7 size covers from generic 2.4'' to 7.0''.
• Nextion Enhanced NX4832K035 is a powerful 3.5'' HMI TFT display, with 32MB Flash data storage space, 1024 byte EEPROM, 8192 byte RAM. With GPIO supported, now you can use Nextion to control external devices.
• Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface between a human and a process, machine, application or appliance. It is the best solution to replace the traditional LCD and LED Nixie tube.
• Note : there's a small power supply test board and a wire for you to test if the electricity supply is enough or not. Please see below image how to use it.

• 0.91 INCH OLED Display: Resolution is 128*32,Very Clear,Black background with blue text display.
• IIC(I2C) interface: Only 4 PIN( VCC, GND, SCL, SDA), Simpler than SPI interface Screen, you can leave more ports for connecting other sensors.
• Sample Code and Technical Support: You can drive this display through the u8glib library. DSD TECH also provides complete sample code and instruction manuals. you can drive this OLED screen in half an hour,
• The main chip is SSD1306; supports DC 3.3V to 5.0V supply. Working Temperature: -30 degrees ~ 70 degrees

• Official Raspberry Pi case for Raspberry Pi 4
• High-quality, two-part ABS construction
• Compatible with 1GB, 2GB and 4GB
• Two-part ABS construction Cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card.

• Adopted of high quality electronic components, and precision process, ensure for the durability.
• Support all MCU control,PLC control and smart home control.
• Applicable for automatic control switch.
• 100% brand new and high quality.
• Safe and reliable, suitable for industrial applications.

Popular Categories on BuyBestBrands.in