Motherboard By Embeddinator

• Kindly buy EnGeniusLabs ORIGINAL product from Embeddinator store. NO SUPPORT / REPLACEMENT will be given for FAKE / CLONE products sold by other stores.
• Compatible with ARDUINO, RASPBERRY PI, ARM, AVR, PIC, 8051, etc.
• Operating Voltage : 12V DC Digital Output : logic one (+12V DC) logic zero (0V DC)
• LAN Connector Digital Output Which Make This Device Easy To Interface With Board & Directly To Motors To Control In Both Clock & Anti-Clock Directions, External LAN Connector Available for easy connections. Mounting Hole of 2.5mm diameter for Easy Mounting

• Kindly buy EnGeniusLab's ORIGINAL product from Embeddinator store. NO SUPPORT / REPLACEMENT will be given for FAKE / CLONE products sold by other stores.
• No Separate Programmer required for board, it can easily program by USB Communication using Bootloader mode, Specially Designed Bootloader Mode that run on 12MHz by using BOOT Button on board
• On Board ATmega8 microcontroller Board with Bootloader Software, L293D & On Board L293D Motor Driving Circuit, 4 LED for output,
• 23 Pin breakout are available for outside device interfacing, On board voltage regulator available for sourcing regulated 5V @ upto 1A voltage to the board and connecting circuit.
• Other Projects:- Wireless Controlled Robot by Bluetooth, Wireless Controlled Robot by Radio Frequency (RF) Module, Mobile Controlled Robot by DTMF Technology, PC (Keyboard) Controlled Robot, Line Follower Robot, Wall Follower Robot, Grid Solver Robot, Maze Solver Robot, Sumo Robot, Hand Gesture Robot, Edge Avoider Robot, Obstacle Avoider Robot, Never Fallen Robot, Autonomous Robot, Joystick Controlled Robot, Free Moving Robot & many more......

• Kindly buy EnGeniusLabs ORIGINAL product from Embeddinator store. NO SUPPORT / REPLACEMENT will be given for FAKE / CLONE products sold by other stores.
• Specially Designed for Various Robotic Project without microcontrollers. Male berg strip given for connection & run properly.
• On board 7805 voltage regulator available for sourcing regulated 5V @ upto 1A voltage to the board and connecting circuit. Extra Berg strip given for GND, +5V & +9V for external connection.
• With Terminal Blocks for connecting motors & power supply and Berg Sticks for control signals from microcontroller
• Wireless Controlled Robot by Radio Frequency (RF) Module, Mobile Controlled Robot by DTMF Technology, Line Follower Robot, Wall Follower Robot, Never Fallen Robot, Autonomous Robot, Joystick Controlled Robot, Free Moving Robot & many more....

• Kindly buy EnGeniusLabs ORIGINAL product from Embeddinator store. NO SUPPORT / REPLACEMENT will be given for FAKE / CLONE products sold by other stores.
• Compatible For UNO, Raspberry Pi, ARM, STM, AVR, PIC, 8051
• 5V Operating Voltage
• Made In India Color Sensor With 4-Bit Analog Output

• Operating Voltage : 5V DC Digital Output : logic one (+3.5V DC) logic zero (0V DC)
• Compatible with ARDUINO, RASPBERRY PI, ARM, AVR, PIC, 8051, Can provide digital output followed by the LM358 IC
• Adjustable Range using preset (Using Potentiometer on board), Mounting Hole of 2.5mm diameter for Easy Mounting

• Kindly buy EnGeniusLabs ORIGINAL product from Embeddinator store. NO SUPPORT / REPLACEMENT will be given for FAKE / CLONE products sold by other stores.
• Infrared Sensor with Control Circuit Board The Sensitivity and Holding Time Can be Adjusted
• Working Voltage Range: DC 4.5V- 20V Current Drain: <60uA Detection Range: <140

• Kindly buy EnGeniusLab's ORIGINAL product from Embeddinator store. NO SUPPORT / REPLACEMENT will be given for FAKE / CLONE products sold by other stores.
• Compatible with RASPBERRY PI, ARM, AVR, PIC, 8051, etc - Can provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V.
• Specially Designed for Various Robotic Project without microcontrollers with Male berg strip given for connection & run properly & also Extra Berg strip given for GND, +5V & +9V for external connection.
• With Terminal Blocks for connecting motors & power supply and Berg Sticks for control signals from microcontroller
• Widely used in Robotics, Motor Driving Applications & Heavy Project Applications.

• Kindly buy EnGeniusLab's ORIGINAL product from Embeddinator store. NO SUPPORT / REPLACEMENT will be given for FAKE / CLONE products sold by other stores.
• Equipped with high-current relay 7A@250V AC / 10A@28V DC. 2. It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc., with High Voltage handling capacity of 220V AC with full protection.
• High quality screw terminals (Terminal Block) provided (COM, NC , NO) for quick and easy connection.& 3 pin Male header for easy interface with microcontroller.
• Input Signal Pin connected to Burg stick for easy accessibility & LED Status indicators to indicate the relay ON/OFF status with Mounting holes provided for easy mounting.
• Compatible with Raspberry Pi, Arduino, AVR, PIC, ARM, 8051....

• 0 TO 5 SECOND VARIABLE TIMER (USER CAN CHANGE) 10 TO 30 CM VARIABLE RANGE (USER CAN CHANGE)
• AUTO CUT MODE ENABLED, SUITABLE FOR INDOOR/OUTDOOR,
• ON BOARD RELAY WITH BACK VOLTAGE PROTECTION SEPARATE PUMP & SOLENOID VALVE CONNECTOR
• 9/12/24/36 VOLT OPERATING VOLTAGE

• Kindly buy EnGeniusLabs ORIGINAL product from Embeddinator store. NO SUPPORT / REPLACEMENT will be given for FAKE / CLONE products sold by other stores.
• Specially Designed for Various Robotic Project without microcontrollers. Male berg strip given for connection & run properly.
• On board 7805 voltage regulator available for sourcing regulated 5V @ upto 1A voltage to the board and connecting circuit. Extra Berg strip given for GND, +5V & +9V for external connection.
• With Terminal Blocks for connecting motors & power supply and Berg Sticks for control signals from microcontroller
• Wireless Controlled Robot by Radio Frequency (RF) Module, Mobile Controlled Robot by DTMF Technology, Line Follower Robot, Wall Follower Robot, Never Fallen Robot, Autonomous Robot, Joystick Controlled Robot, Free Moving Robot & many more....

• Kindly buy EnGeniusLabs ORIGINAL product from Embeddinator store. NO SUPPORT / REPLACEMENT will be given for FAKE / CLONE products sold by other stores.
• Compatible with RASPBERRY PI, ARM, AVR, PIC, 8051, etc - Can provide digital output followed by the LM358 IC.
• Adjustable Range using preset (Using Potentiometer On board) | Mounting Hole of 2.5mm diameter for Easy Mounting
• Operating Voltage : 5V DC Digital Output : logic one (+3.5V DC) logic zero (0V DC)
• It can work in both day & night condition which can adopt by pressing the switch on it.

• Kindly buy EnGeniusLabs ORIGINAL product from Embeddinator store. NO SUPPORT / REPLACEMENT will be given for FAKE / CLONE products sold by other stores.
• Compatible with RASPBERRY PI, ARM, AVR, PIC, 8051, etc.
• External 6-Pinout Available for easy connections. Mounting Hole of 2.5mm diameter for Easy Mounting
• Operating Voltage : 5V DC Digital Output : logic one (+3.5V DC) logic zero (0V DC)
• 4 Pin Digital Output Which Make This Device Easy To Interface With Board & Directly To Motors To Control In Both Clock & Anti-Clock Directions

• 9/12/24/36 VOLT OPERATING VOLTAGE
• ON BOARD RELAY WITH BACK VOLTAGE PROTECTION SEPARATE PUMP & SOLENOID VALVE CONNECTOR
• AUTO CUT MODE ENABLED, SUITABLE FOR INDOOR/OUTDOOR,
• 0 TO 50 SECOND VARIABLE TIMER (USER CAN CHANGE) 10 TO 110 CM VARIABLE RANGE (USER CAN CHANGE)

• Kindly buy EnGeniusLabs ORIGINAL product from Embeddinator store. NO SUPPORT / REPLACEMENT will be given for FAKE / CLONE products sold by other stores.
• Compact and Ready to use design & Professional High Quality Glass PCB Layout Design for Noise Reduction with Board Supports ATmel 8051,8052,8032/31 Series Microcontrollers
• On board Two Line LCD Display (2x16) , Two multiplexed 7-Segment LED Display, Built in Switches (8 keys), Built in 8 LED Interface to test I/O, On Board Reset buttons, Bluetooth Interface (HC-05), Buzzer
• All Port 32 Pins are Breakout Pins are available at male bugs Connector which can be used as main board for developing applications
• Screw terminal for External power Supply (with Jumper Select Option) & External Power Supply range of 7V to 20V with 7805 on board for Internal +5v Supply

• Kindly buy EnGeniusLab's ORIGINAL product from Embeddinator store. NO SUPPORT / REPLACEMENT will be given for FAKE / CLONE products sold by other stores.
• No Separate Programmer required for board, it can easily program by USB Communication using Bootloader mode, Specially Designed Bootloader Mode that run on 12MHz by using BOOT Button on board
• On Board ATmega8 microcontroller Board with Bootloader Software, L293D & On Board L293D Motor Driving Circuit, 4 LED for output,
• 23 Pin breakout are available for outside device interfacing, On board voltage regulator available for sourcing regulated 5V @ upto 1A voltage to the board and connecting circuit.
• Wireless Controlled Robot by Bluetooth, Wireless Controlled Robot by Radio Frequency (RF) Module, Mobile Controlled Robot by DTMF Technology, PC (Keyboard) Controlled Robot, Line Follower Robot, Wall Follower Robot, Grid Solver Robot, Maze Solver Robot, Sumo Robot, Hand Gesture Robot, Edge Avoider Robot, Obstacle Avoider Robot, Never Fallen Robot, Autonomous Robot, Joystick Controlled Robot, Free Moving Robot & many more......

• Kindly buy EnGeniusLabs ORIGINAL product from Embeddinator store. NO SUPPORT / REPLACEMENT will be given for FAKE / CLONE products sold by other stores. Use this Make in India & Make your home smart & Control by Mobile App.
• On board 7805 voltage regulator available for sourcing regulated 5V @ upto 1A voltage to the board and connecting circuit.
• Equipped with high-current relay 7A@250V AC / 10A@28V DC. 2. It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc., with High Voltage handling capacity of 220V AC with full protection.
• No Need of WIFI, Its Generate it own WIFI network through which you can connect via mobile app & control the devices connected to it.

Popular Categories on BuyBestBrands.in