Motherboard By Embeddinator

• 0 TO 5 SECOND VARIABLE TIMER (USER CAN CHANGE)
• AUTO CUT MODE ENABLED, SUITABLE FOR INDOOR/OUTDOOR,
• 9/12/24/36 VOLT OPERATING VOLTAGE
• ON BOARD RELAY WITH BACK VOLTAGE PROTECTION SEPARATE PUMP & SOLENOID VALVE CONNECTOR

• Kindly buy EnGeniusLab's ORIGINAL product from Embeddinator store. NO SUPPORT / REPLACEMENT will be given for FAKE / CLONE products sold by other stores.
• Compact and Ready to use design & Professional High Quality Glass PCB Layout Design for Noise Reduction with Board Supports AVR ATMEGA16, ATMEGA32, ATMEGA8535 Microcontrollers
• On board Two Line LCD Display (2x16) , Two multiplexed 7-Segment LED Display, Built in Switches (8 keys), Built in 8 LED Interface to test I/O, On Board External Interrupt and Reset buttons, Built in Potentiometer interface to ADC, Temperature Sensor Interface (LM35) & Bluetooth Interface (HC-05) Connector, Buzzer
• Specially Design by R&D experts for beginner, learner, project lover, engineer, hobbyist for implementing your imagination code in real world of digital electronics, embedded system & robotics
• All Port & 32 Pins are Breakout Pins are available at male bugs Connector which can be used as main board for developing applications

• Kindly buy EnGeniusLabs ORIGINAL product from Embeddinator store. NO SUPPORT / REPLACEMENT will be given for FAKE / CLONE products sold by other stores.
• Compact and Ready to use design & Professional High Quality Glass PCB Layout Design for Noise Reduction with Board Supports AVR ATMEGA8 Series. Board also have inbuilt MOTOR DRIVING & DTMF Circuit on Board.
• Directly to USB Programmable Board with Boot Feature & also on board Two Line LCD Display (2x16), Built in Switches (4 keys), Built in 4 LED Interface to test I/O, Bluetooth Interface (HC-05), Buzzer
• Specially Designed Bootloader Mode by using BOOT Button on board, NO NEED OF SEPARATE PROGRAMMER.
• 23 Pin breakout are available for outside device interfacing, which used in 50+ Project you can developed on this board by using various outside devices.

• Kindly buy EnGeniusLab's ORIGINAL product from Embeddinator store. NO SUPPORT / REPLACEMENT will be given for FAKE / CLONE products sold by other stores.
• No Separate Programmer required for board, it can easily program by USB Communication using Bootloader mode, Specially Designed Bootloader Mode that run on 12MHz by using BOOT Button on board
• On Board ATmega8 microcontroller Board with Bootloader Software, L293D & On Board L293D Motor Driving Circuit, 4 LED for output,
• 23 Pin breakout are available for outside device interfacing, On board voltage regulator available for sourcing regulated 5V @ upto 1A voltage to the board and connecting circuit.
• Wireless Controlled Robot by Bluetooth, Wireless Controlled Robot by Radio Frequency (RF) Module, Mobile Controlled Robot by DTMF Technology, PC (Keyboard) Controlled Robot, Line Follower Robot, Wall Follower Robot, Grid Solver Robot, Maze Solver Robot, Sumo Robot, Hand Gesture Robot, Edge Avoider Robot, Obstacle Avoider Robot, Never Fallen Robot, Autonomous Robot, Joystick Controlled Robot, Free Moving Robot & many more......

• 5-wire phase can drive ordinary uln2003 chip can also be connected as phase 2 may be supporting the development board
• Direct plug, easy to use stepper motor used in the development board
• Supported by Raspberry Pi, STM, ARM, DSP, AVR, PIC, 8051.
• Driver Voltage is 5V/9V/12V Acc. to Stepper Motor
• Kindly buy EnGeniusLabs ORIGINAL product from Embeddinator store. NO SUPPORT / REPLACEMENT will be given for FAKE / CLONE products sold by other stores.

• Kindly buy EnGeniusLabs ORIGINAL product from Embeddinator store. NO SUPPORT / REPLACEMENT will be given for FAKE / CLONE products sold by other stores.
• Compatible with ARDUINO, RASPBERRY PI, ARM, AVR, PIC, 8051, etc - Can provide digital output followed by the LM358 IC.
• Adjustable Range using preset (Using Potentiometer On board) | Mounting Hole of 2.5mm diameter for Easy Mounting
• This can in turn be used for detecting white/black lines (in line follower ROBOT) or bright/dark objects (in object identification ROBOT) or person counter in Visitor Counter, & also useful in various robotics applications.
• Operating Voltage : 5V DC Digital Output : logic one (+3.5V DC) logic zero (0V DC)

• Screw terminal for External power Supply (with Jumper Select Option) and External Power Supply range of 7V to 20V with 7805 on board for Internal +5v Supply
• Compact and Ready to use design and Professional Glass PCB Layout Design for Noise Reduction with Board Supports AVR ATMEGA16, ATMEGA32, ATMEGA8535 Microcontrollers
• The on board Two Line LCD Display (2x16), Two multiplexed 7-Segment LED Display, Built in Switches (8 keys), Built in 8 LED Interface to test I/O, on Board External Interrupt and Reset buttons, Built in Potentiometer interface to ADC, Temperature Sensor Interface (LM35), Bluetooth Interface (HC-05), Buzzer
• All Port 32 Pins are Breakout Pins are available at male bugs Connector which can be used as main board for developing applications

• This board is buffered and power protected so that you can do some really evil things to the programmer without killing it. It is fast One of the greatest features of this board is the ability to power the target (up to 500mA) from the programmer
• Works under multiple platforms. Linux, Mac OS X and Windows are tested
• Allows you to read or write the microcontroller EEPROM, firmware, fuse bits and lock bits with Programming speed is up to 5KB/second and Software controlled SCK option to support targets with low clock speed (less than 1.5MHz)
• 6 Pin Male Connector along with the programmer for Standard ISP connections with B-type USB Connector for power and Separate Two Different LEDs for power and programmer status

• Kindly buy EnGeniusLabs ORIGINAL product from Embeddinator store. NO SUPPORT / REPLACEMENT will be given for FAKE / CLONE products sold by other stores.
• Compact and Ready to use design & Professional High Quality Glass PCB Layout Design for Noise Reduction with Board Supports AVR ATMEGA8 Series.
• Directly to USB Programmable Board with Boot Feature & also Built in 4 LED Interface to test I/O, Bluetooth Interface (HC-05), with inbuilt Circuit of motor driving L293D on board.
• Specially Designed Bootloader Mode by using BOOT Button on board, NO NEED OF SEPARATE PROGRAMMER.
• 23 Pin breakout are available for outside device interfacing, which used in 20+ Project you can developed on this board by using various outside devices.

• Screw terminal for External power Supply (with Jumper Select Option) and External Power Supply range of 7V to 20V with 7805 on board for Internal +5v Supply
• Compact and Ready to use design and Professional Glass PCB Layout Design for Noise Reduction with Board Supports ATmel 8051, 8052, 8032/31 Series Microcontrollers
• On board Two Line LCD Display (2x16), Two multiplexed 7-Segment LED Display, Built in Switches (8 keys), Built in 8 LED Interface to test I/O, on Board Reset buttons, Bluetooth Interface (HC-05), Buzzer
• All Port 32 Pins are Breakout Pins are available at male bugs Connector which can be used as main board for developing applications

• Kindly buy EnGeniusLab's ORIGINAL product from Embeddinator store. NO SUPPORT / REPLACEMENT will be given for FAKE / CLONE products sold by other stores.
• Compact and Ready to use design & Professional High Quality Glass PCB Layout Design for Noise Reduction with Board Supports ATMEL 89C51, 89C52 Series Microcontrollers
• On board Two Line LCD Display (2x16) , Two multiplexed 7-Segment LED Display, Built in Switches (8 keys), Built in 8 LED Interface to test I/O, On Board Reset buttons, Bluetooth Interface (HC-05) Connector, Buzzer
• Specially Design by R&D experts for beginner, learner, project lover, engineer, hobbyist for implementing your imagination code in real world of digital electronics, embedded system & robotics
• All Port & 32 Pins are Breakout Pins are available at male bugs Connector which can be used as main board for developing applications

• Kindly buy EnGeniusLab's ORIGINAL product from Embeddinator store. NO SUPPORT / REPLACEMENT will be given for FAKE / CLONE products sold by other stores.
• Compact and Ready to use design & Professional High Quality Glass PCB Layout Design for Noise Reduction with Supports Microchip's PIC Series microcontrollers like PIC10F , PIC12F PIC16F , PIC18F , PIC24 dsPIC30, dsPIC33
• 6 Pin Male Connector along with the programmer for Standard ISP connections with B-type USB Connector for power & Separate Two Different LED's for power & programmer status.
• Programs all current 8-, 16-, and 32-bit PIC microcontrollers
• Compatible With Windows- XP, Vista, 7,8,10 & Linux Also

• Kindly buy EnGeniusLabs ORIGINAL product from Embeddinator store. NO SUPPORT / REPLACEMENT will be given for FAKE / CLONE products sold by other stores.
• Specially Designed for Various Robotic Project without microcontrollers. Male berg strip given for connection & run properly.
• On board 7805 voltage regulator available for sourcing regulated 5V @ upto 1A voltage to the board and connecting circuit. Extra Berg strip given for GND, +5V & +9V for external connection.
• With Terminal Blocks for connecting motors & power supply and Berg Sticks for control signals from microcontroller
• Wireless Remote Controlled Robot, Wireless Controlled Robot by Radio Frequency (RF) Module, Mobile Controlled Robot by DTMF Technology, Line Follower Robot, Wall Follower Robot, Never Fallen Robot, Autonomous Robot, Joystick Controlled Robot, Free Moving Robot & many more....

• Kindly buy EnGeniusLab's ORIGINAL product from Embeddinator store. NO SUPPORT / REPLACEMENT will be given for FAKE / CLONE products sold by other stores.
• On board Two Line LCD Display (2x16) , Two multiplexed 7-Segment LED Display, Built in Switches (8 keys), Built in 8 LED Interface to test I/O, On Board External Interrupt and Reset buttons, Built in Potentiometer interface to ADC, Temperature Sensor Interface (LM35) & Bluetooth Interface (HC-05) Female Connector, Buzzer
• All Port & 32 Pins are Breakout Pins are available at male bugs Connector which can be used as main board for developing applications
• Compact and Ready to use design & Professional High Quality Glass PCB Layout Design for Noise Reduction with Board Supports AVR ATMEGA16, ATMEGA32, ATMEGA8535 Microcontrollers
• Programmer:- Works under multiple platforms. Linux, Mac OS X and Windows are tested. Allows you to read or write the microcontroller EEPROM, firmware, fuse bits and lock bits with Programming speed is up to 5KB/second & Software controlled SCK option to support targets with low clock speed (less than 1.5MHz)

• Kindly buy EnGeniusLab's ORIGINAL product from Embeddinator store. NO SUPPORT / REPLACEMENT will be given for FAKE / CLONE products sold by other stores.
• Compact and Ready to use design & Professional High Quality Glass PCB Layout Design for Noise Reduction with Board Supports Microchip's PIC16F877A, PIC16F887A, PIC18Fxx Microcontrollers
• On board Two Line LCD Display (2x16) , Two multiplexed 7-Segment LED Display, Built in Switches (8 keys), Built in 8 LED Interface to test I/O, On Board External Interrupt and Reset buttons, Built in Potentiometer interface to ADC, Temperature Sensor Interface (LM35) & Bluetooth Interface (HC-05) Connector, Buzzer
• Specially Design by R&D experts for beginner, learner, project lover, engineer, hobbyist for implementing your imagination code in real world of digital electronics, embedded system & robotics
• All Port & 35 Pins are Breakout Pins are available at male bugs Connector which can be used as main board for developing applications

• 12/24 VOLT OPERATING VOLTAGE
• 0 TO 50 SECOND VARIABLE TIMER (USER CAN CHANGE) & 30 CM FIX SENSOR RANGE
• AUTO CUT MODE ENABLED, SUITABLE FOR INDOOR/OUTDOOR,
• ON BOARD RELAY WITH BACK VOLTAGE PROTECTION SEPARATE PUMP & SOLENOID VALVE CONNECTOR

Popular Categories on BuyBestBrands.in