Motherboard By Waveshare

• Provide online user manual, please check the manual carefully before using!
• 11.6inch IPS screen,1920x1080 high resolution. Toughened glass capacitive touch panel, 6H hardness.
• When working with Raspberry Pi, it supports Raspberry Pi OS / Ubuntu / Kali and Retropie, single touch, and driver free. When working as a computer monitor, it supports Windows 11/10/8.1/8/7, 10-points touch, and driver free
• Multi-languages OSD menu, for power management, brightness/contrast adjustment, etc. 3.5mm audio jack, supports HDMI audio output. Embedded ferrite Hi-Fi speaker.
• Also supports VGA input (specific cable is required and should be purchased separately). 75x75mm spacing mounting holes (M4 screw hole) for a general wall mount. Comes with 75 tilt angle stand.

• designed for the ST official tool STM32F429I-DISCO
• STM32F429ZIT6 microcontroller featuring 2 MB of Flash memory, 256 KB of RAM in an LQFP144 package
• On-board ST-LINK/V2 with selection mode switch to use the kit as a standalone
• Board power supply: through the USB bus or from an external 3 V or 5 V supply voltage
• L3GD20, ST MEMS motion sensor, 3-axis digital output gyroscope

• 5-inch IPS round screen, 1080 x 1080 hardware resolution.
• 10-point capacitive touch, with toughened glass panel, hardness up to 6H.
• Adopting optical bonding technology, the display effect is better.
• Supports Raspberry Pi OS / Ubuntu / Kali and Retropie when used with Raspberry Pi.
• Supports Windows 11 / 10 / 8.1 / 8 / 7 when used as a computer monitor. Supports HDMI audio output with 3.5mm jack and 4PIN header.

• OpenH743I-C is an STM32 development board designed for the STM32H743IIT6 microcontroller, consists of the mother board and the MCU core board CoreH743I.
• The OpenH743I-C supports further expansion with various optional accessory boards for specific application.
• The modular and open design makes it the ideal for starting application development with STM32 series microcontrollers.
• The OpenH743I-C does NOT integrate any debugging function, a debugger is required.

• Brand:Plastronics
• 32QN50S15050
• QFN / MLF
• 0.5mm Picth
• QFN / MLF32

• Note: you may receive a green OR blue version, which is delivered randomly.
• The STM32F7 discovery kit allows users to develop and share applications with the STM32F7 Series microcontollers based on ARM Cortex-M7 core.
• The discovery kit enables a wide diversity of applications taking benefit from audio, multi-sensor support, graphics, security, video and high-speed connectivity features.
• The Arduino connectivity support provides unlimited expansion capabilities with a large choice of specialized add-on boards.
• STM32F746NGH6 microcontroller featuring 1 Mbytes of Flash memory and 340 Kbytes of RAM, in BGA216 package

• LTE-A Cat 6 module with M.2 form factor
• Supports DL 2 Carrier Aggregation and 64QAM
• Worldwide LTE-A and UMTS/HSPA+ coverage. Low power mode, more power saving
• Integrated multi-constellation GNSS receiver to meet the requirement of fast and accurate positioning in different environments
• MIMO technology meets demands for data rate and link reliability in modem wireless communication systems

• Designed For Raspberry Pi Compute Module 4
• Waveshare CM4 PoE IO Board (B) Inside, Fast And Easy To Build A Mini-Computer
• Onboard Connectors Including CSI/DSI/HDMI/USB/ETH/PCIe/RS232/RS485
• Each Cut-Out Is Completely Aligned With The Connector
• Comes With Cooling Fan, Combined With The Airflow Vent, Better Heat Dissipation

• 4G HAT FOR RASPBERRY PI: Enabling LTE Cat-4 4G / 3G Communication & GNSS Positioning
• Standard Raspberry Pi 40PIN GPIO: Compatible With Raspberry Pi Series Boards, Jetson Nano
• Dial-Up On Windows/Linux: LTE Cat-4: Up To 50Mbps (Uplink) / Up To 150Mbps (Downlink) *, 3G (HSPA+): Up To 5.76Mbps (Uplink) / Up To 42Mbps (Downlink) *
• GNSS Positioning: Supports GPS, BeiDou, Glonass, LBS Base Station Positioning
• Telephone Call & SMS Support: Making Telephone Call Or Sending SMS By AT Commands, With Onboard Audio Jack

• designed for the STM32F405RGT6 microcontroller, consists of the mother board and the MCU core board Core405R.
• Core: Cortex-M4 32-bit RISC
• Operating Frequency: 168MHz, 210 DMIPS/1.25 DMIPS/MHz
• Operating Voltage: 1.8V-3.6V
• Memories: 1MB Flash, 192+4kB SRAM

• The display orientation is portrait by default, 1440?2560 resolution (H?V). Change the software config for landscape display.
• For the moment, only the Raspberry Pi 4B and CM4 have adequate CPU performance to drive this 2K display completely.
• Support more powerful future versions as long as its GPU performance is equivalent to or better than the Pi 4B.
• Limited by the hardware, when working with Raspberry Pi 3B+/Pi 3B/Zero 2w/Zero w, only supports default portrait display and cannot be rotated.
• The case only supports Raspberry Pi 4B. For reference only, Raspberry Pi 4B and CM4 are not included

• Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
• Supports both traditional CAN2.0 and CAN FD protocols. Breakout SPI control pins, for connecting with host control boards like STM32/Arduino
• Onboard electrical isolation, up to 5KV isolated voltage, stable operation, higher anti-interference capability
• Onboard lightningproof, ESD protection, short circuit protection, more safe communication. Onboard voltage translator, select 3.3V/5V operating voltage by jumper
• Onboard 120 terminal resistor, configured by jumper . Comes with development resources and manual (examples for Raspberry Pi/Arduino)

• 800x480 high hardware resolution; Resistive touch control
• Backlight can be turned off to lower power consumption
• Supports popular mini PCs such as Raspberry Pi, BB Black, as well as general desktop computers:When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free
• When work as a computer monitor, supports Windows 10/8.1/8/7, single touch, and driver free

• Provide online user manual, please check the manual carefully before using!
• The display orientation is portrait by default, 480?640 resolution (H?V). Change the software config for landscape display.
• Compatible with Raspberry Pi 5/4B/3B+/3A+, CM3+/4*.( CM3+/4 requires extra adapter board)
• 2.8-inch IPS capacitive touch screen with a hardware resolution of 480?640. Capacitive 5-point touch control. Tempered glass capacitive touch panel, hardness up to 6H.
• Drive LCD directly through Raspberry Pi's DSI interface with a refresh rate of up to 60Hz. Working with Raspberry Pi, supports Raspberry Pi OS system. Backlight brightness control by the software.

• RS485 half-duplex communication: using SP3485, UART control, auto RX/TX switch. CAN half-duplex communication: using MCP2515 + SN65HVD230 solution, SPI control
• Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal. Onboard photocoupler isolation, prevent interference from external high-voltage circuit connected to the relay
• Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & anti-electrostatic
• Onboard resettable fuses and protection diodes, ensuring current/voltage stable output, preventing over current/voltage, better shock-resistance performance
• High quality relay, contact rating: ?10A 250V AC or ?10A 30V DC. ABS protection enclosure with rail-mount support, easy to install, safe to use. Comes with development resources and manual (wiringPi and python examples)

• Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series
• Standard 3.5mm audio jack, for connecting external headphone
• Dual channels speaker headers, for direct driving speakers. 8~384000Hz audio sampling rate
• Stereo sound effect output. Using 3-wire I2S, effectively reducing EMI
• Comes with development resources and manual (Raspberry Pi Pico audio play code, sound card code)

Popular Categories on BuyBestBrands.in