Motherboard By Waveshare

• Suitable For Evaluating The Raspberry Pi CM4 Or Being Integrated Into End Products.Powerful functions.
• Onboard 40PIN GPIO interface and standard CM4 connector, support access to Compute Module 4 Lite/eMMC series core board
• Equipped with CSI/DSI/RTC/FAN/HDMI/USB/RJ45 Gigabit Ethernet/Micro SD card/M.2 and other interfaces, making it more convenient to use
• Onboard 40PIN GPIO interface, Gigabit Ethernet port, HDMI 4K output, dual MIPI CSI camera interface

• Suitable for evaluating the raspberry Pi CM4 or being integrated into end products
• Same size as the CM4, standard CM4 socket, with multiple peripheral interfaces.
• Onboard 8MP camera module with 160?FOV to meet your needs in the application
• TF card socket for Compute Module 4 Lite (without eMMC) variants
• For reference only, the CM4 is NOT included.

• Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
• Onboard SIM7000E module, controlled via UART, supports NB-IoT/eMTC/EDGE/GPRS communication.e-Paper interface, controlled via SPI, compatible with various Waveshare SPI e-Paper raw panels
• Breakout SIM7000E and e-Paper control pins, for connecting with host control boards like STM32.3.7V lithium battery port and charging circuit, provides power to SIM7000E module or external 3.3V system (5V system like Raspberry Pi requires another power supply)
• Onboard voltage translator, select 3.3V/5V operating voltage by switch.Provides Windows host code (based on Alibaba Cloud), make it easy to study/develop, or integrate it into IoT applications
• Comes with development resources and manual (examples for Raspberry Pi/STM32)

• This kit includes the Pico-Relay-B, which is an industrial 8-Channel relay module with build-in power supply isolation, photocoupler isolation, and rail-mount protection enclosure, suitable for realizing wireless control functions safely and stably
• The Pi Pico W included comes with a wireless communication module, hardware of this module uses Infineon's CYW43439 wireless chip, which supports Wi-Fi 4 wireless networks in the 2.4 / 5 GHz band, making it the perfect solution for wireless network control and communication..
• RP2040 microcontroller chip designed by Raspberry Pi in UK. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz, 264KB of SRAM, and 4MB of on-board Flash memory
• USB 1.1 with device and host support, Low-power sleep and dormant modes, Drag-and-drop programming using mass storage over USB
• 26?multi-function GPIO pins, 2?SPI, 2?I2C, 2?UART, 3?12-bit ADC, 16?controllable PWM channels; 8?Programmable I/O (PIO) state machines for custom peripheral support

• NUCLEO-F401RE is a Cortex-M4 development board, which is for the high-performance STM32F4 series. It also has mbed function
• ST Morpho expansion headers are also provided to connect all peripheral peripherals of the microcontroller
• The development board is designed Based on STM32F401RE, and the development board also integrates the ST-LINK/V2-1 emulation downloader (but only provides the external SWD interface), saving you the trouble of purchasing an emulator or downloader
• Can be connected to various Shield expansion boards, allowing you to easily and quickly add special functions
• ST provides a wealth of sample programs, allowing you to get started with STM32F4 microcontrollers more quickly. Come and unleash your creativity

• Onboard BME688 sensor (with Al Function) to measure temperature, humidity, barometric pressure, and gas. Supports Barometric pressure, Environmental temperature, Relative humidity, VOC and VSC gas change detection (supports IAQ calculation in combination with the software package, and integrated AI function)
• Supports I2C communication, I2C address configurable, with I2C bus cascading support
• Supports SPI communication, enabled via CS pin (I2C bus by default)
• Onboard voltage translator, compatible with 3.3V/5V level
• Provide with online development resources and manual (examples for Raspberry Pi/Raspberry Pi Pico/ESP32).Please contact our 24-hour customer service for relevant examples

• Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards. Supports LoRaWAN protocol, different frequency bands are available
• Adopts active temperature compensation crystal oscillator, ensuring stable long-term operating in extreme high/low temperature conditions
• Supports FSK, GFSK, LoRa modulations, outstanding block resistance and ultra long communication distance
• PH1.25 battery header and recharge controller, allows connecting rechargeable Lithium battery. Programmable emitting power (up to 22dBm)
• Supports preamble detection, with CRC, up to 256 bytes data packet engine. Comes with development resources and manual (example in C)

• BME688 Environmental Sensor with AI function, is a four-in-one environmental sensor that can measure temperature, humidity, barometric pressure, and air quality. It is compact, low power, and suitable for smart homes, mobile application environment monitoring, wearable devices, etc.
• Onboard BME688 sensor to measure barometric pressure, Environmental temperature, Relative humidity, VOC and VSC gas change detection (supports IAQ calculation in combination with the software package, and integrated AI function)
• Supports I2C communication, I2C address configurable, with I2C bus cascading support.
• Supports SPI communication, enabled via CS pin (I2C bus by default).
• Onboard voltage translator, compatible with 3.3V/5V level.

• for STM8 and STM32 MCUs
• Atollic, IAR, Keil or TASKING integrated development environments
• 5 V power supplied by a USB connector
• USB 2.0 full speed compatible interface
• USB standard A to mini B cable

• 128?96 resolution OLED display, 262K colors, clear and colorful displaying effect
• SPI interface, minimizes required IO pins
• Comes with online development resources
• Embedded SSD1351 Driver Chip, SPI Communication

• Luckfox Pico Max 256MB Memory is RV1106G3 Chip Linux Micro Development Board (with Pre-Soldered Header ) , integrates ARM Cortex-A7/RISC-V MCU/NPU/ISP Processors, with Rich Interfaces MIPI CSI/ GPIO/ UART/SPI/I2C/USB, etc, which is convenient for developing and debugging quickly
• Single-core ARM Cortex-A7 32-bit core with integrated NEON and FPU. Built-in Rockchip self-developed 4th generation NPU, features high computing precision and supports int4, int8, and int16 hybrid quantization. The computing power of int8 is 0.5 TOPS, and up to 1.0 TOPS with int4.
• Built-in self-developed third-generation ISP3.2, supports 5-Megapixel, with multiple image enhancement and correction algorithms such as HDR, WDR, multi-level noise reduction, etc.
• Features powerful encoding performance, supports intelligent encoding mode and adaptive stream saving according to the scene, saves more than 50% bit rate of the conventional CBR mode so that the images from camera are high-definition with smaller size, double the storage space.
• Built-in 16-bit DRAM DDR3L, which is capable of sustaining demanding memory bandwidths. Integrated with built-in POR, audio codec and MAC PHY.

• Without yellow pre-soldered header. Luckfox Pico Plus is a cost-effective Linux micro development board, based on the Rockchip RV1103 chip to provide a simple and efficient development platform for developers; Supports a variety of interfaces including MIPI CSI, GPIO, UART, SPI, 12C, USB, etc., which is convenient for developing and debugging quickly.
• Single-core ARM Cortex-A7 32-bit core with integrated NEON and FPU. Built-in Rockchip self-developed 4th generation NPU, features high computing precision and supports int4, int8, and int16 hybrid quantization. The computing power of int8 is 0.5 TOPS, and up to 1.0 TOPS with int4
• Built-in self-developed third-generation ISP3.2, supports 4-Megapixel, with multiple image enhancement and correction algorithms such as HDR, WDR, multi-level noise reduction, etc.
• Features powerful encoding performance, supports intelligent encoding mode and adaptive stream saving according to the scene, saves more than 50% bit rate of the conventional CBR mode so that the images from camera are high-definition with smaller size, double the storage space
• Built-in RISC-V MCU supports low power consumption and fast start-up, supports 250ms fast picture capture and loading AI model library at the same time to realize face recognition \"in one second\". Built-in 16-bit DRAM DDR2, which is capable of sustaining demanding memory bandwidths. Integrated with built-in POR, audio codec and MAC PHY

• LuckFox Pico Plus RV1103 Linux Micro Development Board, with Ethernet port, based on the Rockchip RV1103 chip, support MIPI CSI, GPIO, UART, SPl, 12C, USB, etc.interfaces, which is convenient for developing and debugging quickly
• Built-in Single-core ARM Cortex-A7 32-bit core with integrated NEON and FPU; Built-in NPU, features high computing precision and supports int4, int8, and int16 hybrid quantization, the computing power of int8 is 0.5 TOPS, and up to 1.0 TOPS with int4
• Built-in ISP3.2, supports 4-Megapixel, with multiple image enhancement and correction algorithms such as HDR, WDR, multi-level noise reduction, etc. Built-in RISC-V MCU supports low power consumption and fast start-up, supports 250ms fast picture capture and loading AI model library at the same time to realize face recognition \"in one second\"
• Built-in 16-bit DRAM DDR2, which is capable of sustaining demanding memory bandwidths; Integrated with built-in POR, audio codec and MAC PHY
• Features powerful encoding performance, supports intelligent encoding mode and adaptive stream saving according to the scene, saves more than 50% bit rate of the conventional CBR mode so that the images from camera are high-definition with smaller size, double the storage space

• This is a 4-ch current and power monitor HAT designed for Raspberry Pi,Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards,4-ch monitoring, via I2C/SMBus interface.
• Onboard 0.1 1 sampling resistor, allows measuring bi-directional current up to 3.2A. Embedded 12-bit ADC, supports multiple successive converting, 0~26V voltage measuring range
• Directly calculate and output measured power value through additional multiply register.I2C control pins for connecting with other host boards
• Operating voltage: 3.3V/5V. Control interface: I2C/SMBus. Sampling resistor: 0.1 1%. Voltage range: 0~26V.
• Current range: ?3.2A Resolution: 0.8mA (?3.2A range) OR 0.1mA (?400mA range) Dimensions: 65mm 30mm Mounting hole size: 3.0mm

• Single-core ARM Cortex-A7 32-bit core with integrated NEON and FPU. Integrated with built-in POR, audio codec and MAC PHY
• Built-in Rockchip self-developed 4th generation NPU, features high computing precision and supports int4, int8, and int16 hybrid quantization. The computing power of int8 is 0.5 TOPS, and up to 1.0 TOPS with int4
• Built-in self-developed third-generation ISP3.2, supports 5-Megapixel, with multiple image enhancement and correction algorithms such as HDR, WDR, multi-level noise reduction, etc.
• Features powerful encoding performance, supports intelligent encoding mode and adaptive stream saving according to the scene, saves more than 50% bit rate of the conventional CBR mode so that the images from camera are high-definition with smaller size, double the storage space
• Built-in 16-bit DRAM DDR2, which is capable of sustaining demanding memory bandwidths

• With yellow pre-soldered header. Luckfox Pico is a cost-effective Linux micro development board, based on the Rockchip RV1103 chip to provide a simple and efficient development platform for developers; Supports a variety of interfaces including MIPI CSI, GPIO, UART, SPI, 12C, USB, etc., which is convenient for developing and debugging quickly.
• Single-core ARM Cortex-A7 32-bit core with integrated NEON and FPU. Built-in Rockchip self-developed 4th generation NPU, features high computing precision and supports int4, int8, and int16 hybrid quantization. The computing power of int8 is 0.5 TOPS, and up to 1.0 TOPS with int4
• Built-in self-developed third-generation ISP3.2, supports 4-Megapixel, with multiple image enhancement and correction algorithms such as HDR, WDR, multi-level noise reduction, etc.
• Features powerful encoding performance, supports intelligent encoding mode and adaptive stream saving according to the scene, saves more than 50% bit rate of the conventional CBR mode so that the images from camera are high-definition with smaller size, double the storage space
• Built-in RISC-V MCU supports low power consumption and fast start-up, supports 250ms fast picture capture and loading AI model library at the same time to realize face recognition \"in one second\". Built-in 16-bit DRAM DDR2, which is capable of sustaining demanding memory bandwidths. Integrated with built-in POR, audio codec and MAC PHY

Popular Categories on BuyBestBrands.in