Motherboard By Waveshare

• 2.4 GHz WiFi development board support Raspberry Pi Pico expansion board ecosystem to satisfy creative IoT application development, based on single-core 32-bit LX7 microprocessor ESP32-S2FH4, support clock frequency up to 240 MHz
• Onboard 0.96inch 160?80 pixels 65K color IPS LCD display, integrated 320KB SRAM, 128KB ROM, 8MB PSRAM, 4MB Flash memory, support IEEE802.11 b/g/n, on-board 2.4 GHz WiFi ceramic antenna, up to 150 Mbps data transfer rate
• USB-C connector, no more plug orientation problem, on-chip integrated full-speed USB OTG interface, LCD interface (8-bit serial RGB/8080/6800), TWAI controller (ISO11898-1 compatible), capacitive sensor GPIO, temperature sensor and RMT (TX/RX)
• Onboard single 3.7V lithium battery charge/discharge header, suitable for mobile IoT product design
• WiFi dev board with compact size, plenty peripheral interfaces, integrated low-power Wi-Fi System-on-Chip (SoC) and mass memory, castellated module allows soldering direct to user-designed carrier boards

• Adopts MCP2515 and SN65HVD230 dual chips combined solution, allows 2-channel CAN communication.Integrated power isolation, providing stable isolated voltage, requires no extra power supply for the isolated terminal
• Onboard digital isolator, signal isolation makes the communication more safe, more stable, and better anti-interference.Onboard TVS (Transient Voltage Suppressor) diode, provides ESD protection and transient peak voltage protection
• Onboard voltage translator, select 3.3V/5V operating voltage by jumper.
• Onboard 120 terminal resistor, configured by jumper
• Breakout SPI control pins, for connecting with host control boards like STM32/Arduino

• Mini Base Board For Compute Module 4.Suitable For Evaluating The Raspberry Pi CM4 Or Being Integrated Into End Products.Powerful functions in a credit card sized body
• Connecting With Compute Module 4.Standard CM4 Socket And Color-Coded Raspberry Pi 40PIN GPIO Header.Suitable For Compute Module 4 Lite/EMMC Series Module
• Compact, Yet Complete.Onboard Multiple Connectors Including:.CSI/DSI/FAN/HDMI/USB/RJ45 Gigabit Ethernet/Micro SD Card Slot/M.2 Slot

• The PoE HAT (Power Over Ethernet HAT) (Type C) for Raspberry Pi 3B+/4B,Standard Raspberry Pi 40PIN GPIO stackable header, allows connecting other HATs
• PoE (Power Over Ethernet) capability?IEEE 802.3af/at-compliant
• 5V USB-A & 12V header outputs. 5V USB-A provides up to 4A output (MAX 25W for 12V+5V total output power). be able to power extra device while providing stable power to Raspberry Pi.
• Onboard MP8676 buck chip. Incorporates original voltage buck chip. providing up to 4.5A output for Raspberry Pi and USB-A port.
• Onboard high speed active cooling fan, better heat dissipation

• Single-core ARM Cortex-A7 32-bit core with integrated NEON and FPU. Integrated with built-in POR, audio codec and MAC PHY
• Built-in Rockchip self-developed 4th generation NPU, features high computing precision and supports int4, int8, and int16 hybrid quantization. The computing power of int8 is 0.5 TOPS, and up to 1.0 TOPS with int4
• Built-in self-developed third-generation ISP3.2, supports 5-Megapixel, with multiple image enhancement and correction algorithms such as HDR, WDR, multi-level noise reduction, etc.
• Features powerful encoding performance, supports intelligent encoding mode and adaptive stream saving according to the scene, saves more than 50% bit rate of the conventional CBR mode so that the images from camera are high-definition with smaller size, double the storage space
• Built-in 16-bit DRAM DDR2, which is capable of sustaining demanding memory bandwidths

• Single-core ARM Cortex-A7 32-bit core with integrated NEON and FPU. Integrated with built-in POR, audio codec and MAC PHY
• Built-in Rockchip self-developed 4th generation NPU, features high computing precision and supports int4, int8, and int16 hybrid quantization. The computing power of int8 is 0.5 TOPS, and up to 1.0 TOPS with int4
• Built-in self-developed third-generation ISP3.2, supports 5-Megapixel, with multiple image enhancement and correction algorithms such as HDR, WDR, multi-level noise reduction, etc.
• Features powerful encoding performance, supports intelligent encoding mode and adaptive stream saving according to the scene, saves more than 50% bit rate of the conventional CBR mode so that the images from camera are high-definition with smaller size, double the storage space
• Built-in 16-bit DRAM DDR2, which is capable of sustaining demanding memory bandwidths

• Single-core ARM Cortex-A7 32-bit core with integrated NEON and FPU. Integrated with built-in POR, audio codec and MAC PHY
• Built-in Rockchip self-developed 4th generation NPU, features high computing precision and supports int4, int8, and int16 hybrid quantization. The computing power of int8 is 0.5 TOPS, and up to 1.0 TOPS with int4
• Built-in self-developed third-generation ISP3.2, supports 5-Megapixel, with multiple image enhancement and correction algorithms such as HDR, WDR, multi-level noise reduction, etc.
• Features powerful encoding performance, supports intelligent encoding mode and adaptive stream saving according to the scene, saves more than 50% bit rate of the conventional CBR mode so that the images from camera are high-definition with smaller size, double the storage space
• Built-in 16-bit DRAM DDR2, which is capable of sustaining demanding memory bandwidths

• Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
• 264KB of SRAM, and 4MB of onboard Flash memory. Onboard CH9120 with integrated TCP/IP protocol stack
• 14 multi-function GPIO pins, compatible with some Pico HATs. Castellated module allows soldering direct to carrier boards
• Drag-and-drop programming using mass storage over USB. Temperature sensor
• 8 Programmable I/O (PIO) state machines for custom peripheral support

• RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
• 264KB of SRAM, and 2MB of on-board Flash memory. USB-C connector, keeps it up to date, easier to use
• Castellated module allows soldering direct to carrier boards. USB 1.1 with device and host support. Low-power sleep and dormant modes
• Drag-and-drop programming using mass storage over USB. 29 multi-function GPIO pins (20 via edge pinout, others via solder points). 2 SPI, 2 I2C, 2 UART, 4 12-bit ADC, 16 controllable PWM channels
• Accurate clock and timer on-chip Temperature sensor. Accelerated floating-point libraries on-chip. 8 Programmable I/O (PIO) state machines for custom peripheral support

• RP2040-Zero Mini Version board, Pico-Like MCU Board Based on Raspberry Pi MCU RP2040, Castellated module, suitable for SMD applications.
• RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz. Onboard 264KB of SRAM, and 2MB Flash memory. Type-C USB Connector, keeps it up to date, easier to use.
• Castellated module allows soldering direct to carrier boards. USB 1.1 with device and host support. Low-power sleep and dormant mode.
• Drag-and-drop programming using mass storage over USB. 29 multi-function GPIO pins (20 via edge pinout, others via solder points). 2 SPI, 2 I2C, 2 UART, 4 12-bit ADC, 16 controllable PWM channels.
• Accurate clock and timer on-chip. Temperature sensor. Accelerated floating-point libraries on-chip. 8 Programmable I/O (PIO) state machines for custom peripheral support . Support C/C++?MicroPython. Development Resources/User Manual: www.waveshare.com/wiki/RP2040-Zero?Amazon

• 2\" LCD Display Module for Raspberry Pi Pico, onboard female pin header for direct attaching to Raspberry Pi Pico
• 320?240 resolution, IPS screen, 65K RGB colors, clear and colorful displaying effect
• Embedded ST7789VW Driver, Using SPI Bus, SPI interface, requires minimal IO pins
• 4x user buttons for easy interacting
• Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)

• With FLASH, with pre-soldered header
• Single-core ARM Cortex-A7 32-bit core with integrated NEON and FPU. Built-in Rockchip self-developed 4th generation NPU, features high computing precision and supports int4, int8, and int16 hybrid quantization. The computing power of int8 is 0.5 TOPS, and up to 1.0 TOPS with int4
• Built-in self-developed third-generation ISP3.2, supports 4-Megapixel, with multiple image enhancement and correction algorithms such as HDR, WDR, multi-level noise reduction, etc. Built-in 16-bit DRAM DDR2, which is capable of sustaining demanding memory bandwidths
• Features powerful encoding performance, supports intelligent encoding mode and adaptive stream saving according to the scene, saves more than 50% bit rate of the conventional CBR mode so that the images from camera are high-definition with smaller size, double the storage space. Integrated with built-in POR, audio codec and MAC PHY
• Built-in RISC-V MCU supports low power consumption and fast start-up, supports 250ms fast picture capture and loading AI model library at the same time to realize face recognition \"in one second\"

• RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom. Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz
• 264KB of SRAM, and 16MB of onboard Flash memory. Onboard DVI interface can drive most HDMI screens (DVI compatibility required). Supports using as a USB host or slave via onboard PIO-USB port
• Onboard TF card slot for reading and writing TF card. Onboard Lithium battery recharge/discharge header, suitable for mobile scenarios. USB 1.1 with device and host support
• Drag-and-drop programming using mass storage over USB. Low-power sleep and dormant modes. 2 SPI, 2 I2C, 2 UART, 4 12-bit ADC, 16 controllable PWM channels
• Accurate clock and timer on-chip. Temperature sensor. Accelerated floating-point libraries on-chip. 8 Programmable I/O (PIO) state machines for custom peripheral support

• Embedded ST7789 Driver, Using SPI Bus
• 240?240 resolution, 65K RGB colors, clear and colorful displaying effect
• SPI interface, minimizes required IO pins, supports controller boards like Raspberry Pi//STM32
• Comes with development resources (examples for Raspberry Pi//STM32)
• Supports Controller Boards Like Raspberry Pi//STM32

• Without yellow pre-soldered header. Luckfox Pico is a cost-effective Linux micro development board, based on the Rockchip RV1103 chip to provide a simple and efficient development platform for developers; Supports a variety of interfaces including MIPI CSI, GPIO, UART, SPI, 12C, USB, etc., which is convenient for developing and debugging quickly.
• Single-core ARM Cortex-A7 32-bit core with integrated NEON and FPU. Built-in Rockchip self-developed 4th generation NPU, features high computing precision and supports int4, int8, and int16 hybrid quantization. The computing power of int8 is 0.5 TOPS, and up to 1.0 TOPS with int4
• Built-in self-developed third-generation ISP3.2, supports 4-Megapixel, with multiple image enhancement and correction algorithms such as HDR, WDR, multi-level noise reduction, etc.
• Features powerful encoding performance, supports intelligent encoding mode and adaptive stream saving according to the scene, saves more than 50% bit rate of the conventional CBR mode so that the images from camera are high-definition with smaller size, double the storage space
• Built-in RISC-V MCU supports low power consumption and fast start-up, supports 250ms fast picture capture and loading AI model library at the same time to realize face recognition \"in one second\". Built-in 16-bit DRAM DDR2, which is capable of sustaining demanding memory bandwidths. Integrated with built-in POR, audio codec and MAC PHY

• ESP32-S3 Microcontroller Wi-Fi Development Board with pre-soldered header. Supports Development Environments Such As ESP-IDF, Arduino, MicroPython,Etc. Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started
• MHz. Integrated 512KB SRAM, 384KB ROM, 2MB PSRAM, 16MB Flash memory. Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, with superior RF performance. Powerful AI Computing Capability & Reliable Security Features.
• Onboard CH343 and CH334 chips can meet the needs of USB and UART development via a Type-C interface. Onboard DC-DC chip MP28164, high efficiency DC-DC buck-boost chip with load current up to 2A.
• Type-C connector, easier to use. 27 multi-function GPIO pins. Rich peripheral interfaces, including full-speed USB OTG, SPI, I2C, UART, ADC, PWM and DVP (8-bit ~ 16-bit camera interface), LCD interfaces (8-bit ~ 16-bit parallel RGB, I8080, MOTO6800), etc. to achieve various functions flexibly Castellated module allows soldering directly to carrier boards.
• Supports multiple low-power operating states, adjustable balance between communication distance, data rate and power consumption to meet the power requirements of various application scenarios. Supports Raspberry Pi Pico expansion board ecology, suitable for artificial intelligence IoT application development.

Popular Categories on BuyBestBrands.in