Motherboard By Waveshare

• Sensor Chip: TCS3200 (RGB color detector)
• Detects static color, the output is a square wave with frequency directly proportional to incident light intensity
• Supports fill-light by onboard LEDs
• Ambient light sensing and calibration
• Test strip reading

• Luckfox Pico Mini Linux micro developmentboard, based on Rockchip RV1103 chip, integrates ARM Cortex-A7/RISC-V MCU/NPU/ISP processors, 64MB DDR2 memory, 128MB SPI NAND flash, supports a variety of interfaces including MIPI CSI, GPIO, UART, SPI, I2C, USB, etc.
• Micro RV1103 Linux development board integrates single-core ARM Cortex-A7 32-bit core with integrated NEON and FPU, built-in RISC-V MCU supports low power consumption and fast start-up, supports 250ms fast picture capture and loading AI model library at the same time to realize face recognition \"in one second\"
• Built-in Rockchip self-developed 4th generation NPU, features high computing precision and supports int4, int8, and int16 hybrid quantization. The computing power of int8 is 0.5 TOPS, and up to 1.0 TOPS with int4
• Built-in self-developed third-generation ISP3.2, supports 4-Megapixel, with multiple image enhancement and correction algorithms such as HDR, WDR, multi-level noise reduction, etc.
• Features powerful encoding performance, supports intelligent encoding mode and adaptive stream saving according to the scene, saves more than 50% bit rate of the conventional CBR mode so that the images from camera are high-definition with smaller size, double the storage space, built-in 16-bit DRAM DDR2, which is capable of sustaining demanding memory bandwidths, integrated with built-in POR, audio codec and MAC PHY

• Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.
• I2C controlled, using only 2 pins.Reserved I2C control pins, allows to work with other control boards.Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales).
• Standard servo interface, supports common used servo such as SG90, MG90S, MG996R, etc.Power supply: 5V (Pi connector) OR 6V~12V (VIN terminal). Servo voltage: 5V.Logic voltage: 3.3V.
• Driver: PCA9685. Control interface: I2C. Dimension: 65mm x 30mm. Mounting hole size: 3.0mm.
• Comes with development resources and manual (examples in python like Bluetooth/WiFi remote control)

• Effective distance: 0.8m(type), 1.5m(max)
• Power: 2.5v 5.0v
• Dimension: 53.0mm x 18.0mm

• The GamePi15 will turn your Raspberry Pi into a tiny retro game console in a second, recalls you all the gaming pleasures in the memory. You might have noticed that there are so many game console solutions for the regular size Pi in the market, but rare for the Pi Zero.
• That's why we publish this GamePi15, a full-functional game console expansion in the extreme compact size, tailored for the Raspberry Pi Zero/Zero W/Zero WH.
• Simply combine it with the Zero, now you get a literally \"portable console\", have fun anywhere anytime. 1.54inch screen, 240×240 resolution.
• Compatible with Raspberry Pi Zero/Zero W/Zero WH/B+/2B/3B/3B+. Integrates battery charge circuitry, powered from a 14500 lithium battery (NOT included), plays anywhere anytime Battery capacity indicator
• Onboard speaker and earphone jack, listen to the familiar BGM from the old days Onboard volume knob, adjust the volume according to specific game, better experience

• Supports banana pi / banana pro, comes with lubuntu, raspbian images
• Supports bb black, comes with angstrom image
• For other mini-pcs, a driver is required and should be developed by users
• Rev2.1 features 1: upgrade to its screen, wider viewing angle, more clear displaying
• Standard hid protocol, easy to be integrated into your system Rev2.1 features 2: for the raspberry pi, supports raspbian, ubuntu, windows 10 not, single touch, and driverfree Rev2.1 features 3: when work as a computer monitor, supports windows 10/8.1/8/7, five-points touch, and driverfree

• Supports any revision of Raspberry Pi (directly-pluggable)
• 320x480 resolution, better display
• Convenient Men-Machine interface for Raspberry Pi, combined with the portable power, DIY anywhere anytime
• Supports Raspbian system
• Support software keyboard (system interaction without keyboard/mouse)

• Length: 600.0mm
• For use with: Raspberry Pi Camera
• Category: FFC

• IPS, 1280x800, 10.1 inch Capacitive Touch Screen LCD, Supports Multi mini-PCs, Multi Systems Capacitive touch control, supports up to ten-points touch
• Capacitive touch control, supports up to ten-points touch
• When works with Raspberry Pi, supports Raspbian, Ubuntu, Windows , single touch, and driver free
• When work as a computer monitor, supports Windows 8.1/8/7, ten-points touch, and driver free
• Supports Banana Pi, Banana Pro, comes with Lubuntu, Raspbian images;Supports BeagleBone Black, comes with Angstrom image

• HDMI interface for displaying, USB interface for touch control
• 800x480 high hardware resolution
• Resistive touch control
• Supports popular mini PCs such as Raspberry Pi, BB Black, as well as general desktop computers

• Standard HID protocol, easy to be integrated into your system
• For the Raspberry Pi, supports Raspbian, Ubuntu, Windows 10 IoT, single touch, and driver free
• Supports Banana Pi / Banana Pro, comes with Lubuntu, Raspbian images;Supports BB Black, comes with Angstrom image
• When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free
• For other mini-PCs, driver is required and should be developed by users

Popular Categories on BuyBestBrands.in