Electronics Store - Computer Peripherals - Networking - Repeaters And Extenders

• The JVAW53 HDMI over Wireless Extender includes a transmitter and receiver kit. It can send a high resolution video and audio signal with a receiver distance of up to 60 meters and almost zero delay to a HDMI TV set, projector or LCD PC monitor display device
• Wireless: Stable connection, high quality and low latency below 60ms
• Support 480p/576p/720p/1080p/480i/576i/720i/1080i
• A flexible audio/video solution for conference rooms (sharing ideas and data), digital signage (extending distances between screens) and other applications
• Compatible with PS4 and Switch gaming systems, Blu-ray players, set-top boxes and more

• Extends a 1920 x 1440 (60Hz) video and audio signal up to 500 ft., or a 1024 x 768 (60Hz) video and audio signal up to 1,000 ft., when using 24Awg, Solid Wire Cat5e/6 cable, such as Tripp Lute's N022-01K-GY (Cat5) and N222-01K-GY (Cat6)
• EDID copy feature ensures optimal display compatibility
• For optimal image quality between 500 and 1,000 ft., use Zero-Skew cable, such as Tripp Lite P524-01K
• The remote (Receiver) unit features built-in Equalization and Gain controls to adjust the video image
• Includes mounting hardware for both local and remote units, allowing them to be wall mounted, rack mounted or pole mounted
• 1-year limited warranty

• 40GBASE-LR4 QSFP+ to LC Optical 40G Ethernet Transceiver Module, Single Mode, 4 CWDM Lane Internal Module in 1310nm Window, Duplex LC Connector, DDM, 10km, 40G Ethernet Rate Only
• Wide Compatibility - Cisco QSFP-40G-LR4 and other open switches. Conforms to IEEE 802.3ba standard, SFF 8436, and QSFP multi-source agreement
• EASY TO USE - Easy to install, plug and play, fully hot pluggable. Widely used in fiber switches, routers, NICs, servers, or other fiber optic equipment with 40Gb QSFP+ ports
• GREAT DDM FUNCTION - With DDM you can monitor important information about the status of transmitting and receiving signals in real time and find potential issues
• 10Gtek is the manufacturer of Walkie Talkies. Customized service is available

• Extend RS232 up to 1000M/ 3300ft
• Data transfer rates of up to 230Kbps
• Compatible with all RS232 communications
• Employ existing cat 5, 5E, 6 or better Ethernet infrastructure to remotely connect

• Up to 20KM Extension : This HDMI over fiber sends HD 1080p HDMI signal to remote transmission through a Fiber Optic cable with LC connector
• Full HD Resolution : HDMI fiber extender supports up to 1920*1080@60Hz resolution, specially supports 1600*1200@60Hz. Compatible backwards with lower resolution
• Uncompressed Transmission : HDMI to fiber converter can transmit the uncompressed signals up to 20km with no delay and no loss, audio and video synchronous transmission
• Multi-scene Application : HDMI over fiber extenders is great ideal for applications such as security monitoring, broadcast, video conferencing, multimedia classrooms, high-end medical imaging, interactive digital signage, home theatres, education systems and even industrial automation
• Simple Plug and Play : No APP or driver needed. Our products are backed with a 1-year limited warranty and experienced tech support team. If you have any questions or concerns, click on our name in the buy box and select \"Ask a Question\"

• Instantly doubles cable range to 200 metres | Integrated mounting holes
• No local power is required
• Full unrestricted network bandwidth
• Universal 10/100 compatibility (Gigabit available)
• Extends POE and POE Plus up to 90 watts

• EXTENDS NETWORK CONNECTION OVER FIBER OPTIC CABLE: Extends 10/100/1000 Mbps Gigabit Ethernet network connection over fiber optic cable using your choice of SFP transceiver. Automatic MDI/MDI-X configuration connects devices without crossover cabling.
• MONITOR YOUR INSTALLATION: LEDs indicate connection, statuses, and data transfer speed. Local Loop Back (LLB) functions ensure copper and fiber cables have been correctly installed. DIP switches control each function and turn them on or off.
• BUILT TO WITHSTAND INDUSTRIAL STRENGTH HAZARDS: Operating temperature range of -40 to 75?C or -40 to 167?F. Protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. DIN mounting hardware included.
• COMPLIANT PRODUCTS FOR GOVERNMENT BUSINESSES: Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.
• RELIABLE PRODUCT FULLY BACKED AND SUPPORTED: This product is covered by a 2-Year Limited Warranty and is supported by Tripp Lite's Chicago-based expert technical support team over phone and email.

• 100m/328fts Extender HDBasT HDMI extender 4K enables you to transmit uncompressed files up to 100m (328fts) over a cat6 Ethernet cable with zero latency, using the latest transmission technology. It's a plug-and-play device that doesn't require any software or driver installation, making it ideal for home theater, multimedia education, security systems, and more.
• 4K@60Hz UHD Resolution Compatible with HDMI 1.4/HDCP 1.4 and backward compliant, supporting up to 4K@60Hz (YUV 4:2:0, 8-bit) and 4K@30Hz (YUV 4:4:4, 12-bit) Ultra HD resolution. It also supports 3D videos, HDR 10, Dolby Atmos, and mainstream audio and video formats, providing an unparalleled visual experience.
• Bi-Directional IRHDMI over IP extender also supports bi-directional IR (20-60Khz), allowing you to control the output device via the source device and vice versa. Additionally, there are two RS232 ports for firmware updates and transmitting control signals from computer interfaces.
• Bi-Directional POCWith POC unilateral power supply, you only need to use one power adapter (included in the package) at TX or RX to power the entire system. The device also has built-in ESD protection, and to ensure the stability of the connection, we recommend providing power to the RX, which consumes more power.
• Wide compatibleEDID passthrough automatically identifies the information of the output devices, eliminating compatibility issues. It's compatible with mainstream devices with HDMI ports, such as PCs, laptops, PS4/5, set-top boxes, monitors, server hosts, and more.
• Strong after-sales supportCustomer satisfaction is our top priority. If you have any questions about our product, please don't hesitate to contact us, and we will reply within 24 hours. Thank you for your trust in our brand!

• This 10 meter NMEA 2000 drop cable offers connection between a NMEA 2000 device and T-connector
• Couplers connect to the corresponding T-connectors, creating a simplified installation
• Includes (1) NMEA 2000 drop cable
• Compatible with: HELIX G2N, G3N, G4N models, all SOLIX models and all APEX models
• Cable length: 10 meter (32.8 ft)

Popular Categories on BuyBestBrands.in