Power Tools By Generic

Generic 5Pcs 6Mm Shank Tungsten Carbide Burr 6 * 8Mm Head Rotary Cutter Files Set - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 1/2 X 3/8 Inch Carbide Router Bit Round Over Edging Router Bit Wood Working Cutter - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 5Pcs High Speed Steel Drill Bits 16-30Mm Hole Saw Cutter Set - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic Hrc89 Coating Step Drill Bit 4-20Mm Hss M35 Cobalt Step Cone Drill Bit Hole Cutter - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic Rb35 2Pcs 1/2 Inch Shank Flute And Bead Router Bit Set Wood Working Cutter - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 2-13Mm 3/8-24Unf Keyless Drill Chuck Or Removable 1/4 Inch Quick Change Shank - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 1/2 Inch Shank 2-1/4 Inch Diameter Bottom Cleaning Router Bit Woodworking Milling Cutter - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic Hole Saw Wood Cutter Wood Working Tool Size 22Mm - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 3Mm Tire Repair Carbide Reamer Drill Bit Carbon Steel Wheel Cutting Tool - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 10 Pcs 1/8 Inch Shank Tungsten Steel Pcb Drill Bits 0.4 Mm Titanium Coated Carbide Pcb Drill Bit Set - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 4Pcs Hss 1/4 Hex Shank Countersunk Drill Bit Tapper Tool Set - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 6Mm Automatic Center Pin Punch Spring Loaded Marking Starting Holes Tool #2 - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 210Mm Tungsten Carbide Tip 6Mm Sds Plus Masonry Hammer Drill Bit Size:16Mm - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 25Mm Sds Plus Hammer Drill Bit 450 Mm Tungsten Carbide Tip Hammer Drill - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 10Pcs 2.2Mm Micro Hss Twist Drilling Bits Straight Shank Electrical Drill Tool - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 6Mm Shank 18Mm Steel Ball Cutter Woodworking Milling Cutter Carving Tool - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 


Facebook Twitter Instagram LinkedIn
© 2018 - BuyBestBrands.in All Rights Reserved