Power Tools By Generic

Generic 12Mm Tungsten Carbide Tip Hammer Drill 460 Mm Sds Plus Masonry Hammer Drill Bit - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 6Pcs 6Mm Diamond Hole Saw Cutter Drill Bit For Tile Ceramic Glass Porcelain Marble - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 1/2 Inch Shank 1/2 Inch Radius Round Over Edging Router Bit Wood Working Cutter - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic Four Slot Four Blade Wood Working Auger Drill Bit 14Mm Hex Shank Bore Hole Twist Drill Bit - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic Hand Punching Beading Tool Set Hand Drill With 10 Pcs 0.8-3Mm Twist Drill Bits And Accessories - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 5Pcs 12Mm Hss Straight Shank Metric Twist Drill Bit Set Professional Tool - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic Adjustable 200Mm Circle Hole Saw Drill Bit Cutter Kit Diy Tool - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 3Pcs Hss Titanium Coated Step Drill Bit 1/8 To 3/4 Inch Hole Cutter - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic Alloy Forstner Drill Bit Wood Working Hole Saw From Size:22Mm - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 460Mm 24Mm Hex Shank Brad Point Drill Sds Auger Drill Bit Spiral Wood Drilling Tool - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 5Pcs 15-35Mm Forstner Drill Bits Set Hinge Hole Cutters Wood Working Hole Saw Cutters - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 55Mm Forstner Drill Bits Wood Working Boring Hard Alloy Hole Saw Cutter - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 460Mm 12Mm Hex Shank Brad Point Drill Sds Auger Drill Bit Spiral Wood Drilling Tool - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 3Pcs 4-12/20/32Mm Hss Step Drill Bits Set Spiral Grooved Hole Cutter - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 10Pcs 3.175Mm Shank Carbide Milling Cutter Cnc 4 Flute Spiral Bit End Mill Cel 15Mm - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 
Generic 3.175Mm Shank 17Mm Single Flute End Mill Cutter Titanium Coated Spiral Drill Bit - Product Features
  • Material: Carbide Flutes: 2 Flute Shank Diameter: 3.175mm (1/8\") Cutting Diameter: 3.175mm (1/8\") Cutting Edge Length (Flute Length): 12mm Total Length: 38.5mm Quantity: 1pc
  • High-density polished, wear-resistant, high temperature. High cost-effective, improve efficiency. Mainly used in cutting and engraving. Can be engraved Copper, Aluminum ,ABS, Acrylic, PVC, Wood, most plastics ect.. Package Included: 1 x Ball Nose End Mill
 


Facebook Twitter Instagram LinkedIn
© 2018 - BuyBestBrands.in All Rights Reserved