Tools & Testers By xcluma

AC 200V to 450V AC 100Amp Digital AC Voltmeter Alternationg Voltage Current Meter DIN RAIL Single Three Phase, White - Product Features
  • 1. Measurement accuracy: 1% plus or minus 2 words 2. Display: 0.5 inch LED digital tube (voltage red display, current pure green display / display is clearer) 3. Measurement range: AC voltage: 200V to 450V The user selects a voltage measurement range as needed
  • 4. AC current: AC0.1-99.9A (more than 100A need to be equipped with another transformer) 5. power consumption <0.2VA 6. Measurement speed: about 2 times per second 7. Dimensions: 54 (length) * 80 (width / height) * 64 (thickness) mm 8. Press the width: = 3P (DZ47 / C45, air switch position) 9. Instrument protruding part size: 54 (length) * 45 * (width / height) * 16 (thick / deep) mm
  • 10. Built-in Current transformer: The wire of the measuring circuit passes through the round hole on the right side of the meter (the diameter of the hole 11MM can pass through the maximum 12 square (mm) standard copper wire / can meet the maximum load current of 100A) Note: The load passes through the meter hole Passing through from above or below does not affect the accuracy of current measurement.
  • 11. The external transformer (hole diameter 15.5mm) can meet the national standard 21-25 square (mm) standard copper wire. 13. This instrument is only suitable for pure AC 50-60HZ mains power supply. It can't be used for square wave, inverter output and sine wave circuit for correcting sine wave, otherwise the instrument will be permanently damaged!
  • Use and wiring method 1. Connect the measured voltage to the 1 and 2 terminals on the lower left side of the meter. 2. The conductor of the measuring circuit is passed through the right circular hole of the instrument. 3. Pin 3 and 4 is only used if external CT is used for Current Measuerment
 
xcluma USB Charger Doctor Mobile Power Detector Battery Test Voltage Current Meter - Product Features
  • Usb charger doctor voltage current meter mobile battery tester power detector display data: Voltage current input usb
  • Rtz, reset button, press it three seconds will reset out usb voltage: 4v-20v ( 1 percent accuracy ) current: 0-3a ( accuracy of 04 percent ) battery capacity (0-99999mah)
  • Working time (0-99hour) the working time and capacity have memory function when power off
 


Facebook Twitter Instagram LinkedIn
© 2018 - BuyBestBrands.in All Rights Reserved