Embeddinator's AVR ATMega8 Bootloader Mini Development Board with USB Cable & 25-Pin Wires - Product Features
- Kindly buy EnGeniusLabs ORIGINAL product from Embeddinator store. NO SUPPORT / REPLACEMENT will be given for FAKE / CLONE products sold by other stores.
- Compact and Ready to use design & Professional High Quality Glass PCB Layout Design for Noise Reduction with Board Supports AVR ATMEGA8 Series.
- Directly to USB Programmable Board with Boot Feature & also Built in 4 LED Interface to test I/O, Bluetooth Interface (HC-05), with inbuilt Circuit of motor driving L293D on board.
- Specially Designed Bootloader Mode by using BOOT Button on board, NO NEED OF SEPARATE PROGRAMMER.
- 23 Pin breakout are available for outside device interfacing, which used in 20+ Project you can developed on this board by using various outside devices.
Micsonic Combo Biostar H61B Motherboard 6 Graphics Card Slot with Intel Core I3 3rd Gen Processor Gaming, Editing, Bitcoin, Mining - Product Features
- Biostar H61B Motherboard 6 Graphics Card Slot
- Intel Core I3 3rd Gen Processor included with this
- BIOs updated and tuned for perfect mining
- Brand new Original Biostar Motheboard
Olatus 5V Single Channel Relay Board Module For Raspberry Pi Arduino AVR PIC 8051 - Product Features
- BUY IN ORIGINAL FROM OLatus or OL ELECTRONICS STORE ONLY. WE WILL NOTE SUPPORT FAKE MODULES
- One Channel Relay Module with 5V Relay
- High quality PBT terminals (Terminal Block) provided (C, NC , NO) for quick and easy connection
- Can be controlled with 5V
- Best use with microcontroller projects
Set of 2 - Digital I/O Board (i.e. 8 LEDs and 2 switches) for micro-controller development board - Product Features
- 8 LEDs are in common anode Mode, Logic '1' for ON
- Switches are Logic '0' when pressed
- Switches have LED output to show switch press
- It is used to give digital input and observe digital output of microcontroller
MSI MAG Z490 Tomahawk Motherboard (ATX, 10th Gen Intel Core, LGA 1200, DDR4, 2X M.2, USB 3.2, Type-C, 2.5G LAN, RGB) - Product Features
- Supports 10th Gen Intel Core / Pentium Celeron processors for LGA 1200 socket
- Supports DDR4 Memory, up to 4800(OC) MHz
- Thermal Solution: Extended Heatsink Design and M.2 Shield Frozr are built for system and non-stop works
- Ready 4 the Future: Support Lightning Gen 4 Solution for the future
- Lightning USB 20G: Powered by ASmedia 3241 USB 3.2 Gen2x2 controller, offering never before seen USB speeds up to 20Gb/s with USB Type-C
- Product cover may differ slightly in appearance to illustrations/picture provided
Embedded kart 1.3" White 128x64 OLED LCD 4-Pin Display Module I2C IIC Serial Interface for Arduino - Product Features
- Driving Voltage: 3.3-5V.
- Interface Type: IIC.
- Light Color: White.
- Controlling Chip: SSH1106.
- Operating Temperature: -40~70
SaiRetail.Com 6 Pack Version 008S PCI-E Express Cable 1X to 16X Graphics Extension Ethereum ETH Mining Powered Riser Adapter Card, 60cm USB 3.0 Cable, 4 Solid Capacitors - Product Features
- VER 008S: Version 008S riser kits are the newest and top of the line solution for setting up GPU mining rigs. STABLE and SAFE: 4 Solid Capacitors deliver power to Graphics stably and safely.
- STABLE CABLE: 63cm USB 3.0 cable, very soft and easy to place and route. Cable with shield net inside is more stable for mining. PCI-E 1x to 16x powered riser adapter card with multi-layer shielded wire will not weaken the signal within 3 meters.
- REDUCE MOTHERBOARD BURDEN: 4PIN, SATA and Graphic card 6PIN interface are optional to power, which provides Graphic card independent power and reduces motherboard burden when using more Graphic cards.
- WIDELY APPLICABLE: Suitable for all Window systems, LINUX and MAC. LED indicator and fuse are used on the board: Indicates the connection status between your devices.
- WARRANTY: and guarantee. Please feel free to contact us if you need any help about our products.
GIGABYTE B460M DS3H V2 Ultra Durable Motherboard with GIGABYTE 8118 Gaming LAN, PCIe Gen3 x4 M.2, 7 Colors RGB LED Strips Support - Product Features
- Supports 10th Gen Intel Core Processors and 11th Gen Intel Core Processors*
- Dual Channel Non-ECC Unbuffered DDR4, 4 DIMMs
- NVMe PCIe Gen3 X4 M.2 Connectors
- RGB FUSION 2.0 with Multi-Zone Addressable LED Light Show Design, Support Addressable LED & RGB LED Strips
- Intel Optane Memory Ready
- Anti-Sulfur Resistors Design
- Smart Fan 5 Features Multiple Temperature Sensors,Hybrid Fan Headers with FAN STOP
CHIST-POWERX B75 Motherboard with HDMI,VGA,DVI LGA1155 Chipset : Intel H61Chipset (I5 3RD GEN, DDR3 4GB RAM and 120GB SSD) 3/I5/I7 2nd and 3rd Gen Supported with - Product Features
- CHIST-POWERX B75 Motherboard with HDMI,VGA,DVI LGA1155 Chipset : Intel H61Chipset I3/I5/I7 2nd and 3rd Gen Supported
- ntel Core i5 3470s 3rd Gen Processor with Base Frequency 2.9GHz, Max Turbo 3.40 GHz, 4 Cores, 12 Threads, 9MB Smart-cache
- 120GB Internal Solid State Drive Sata3 2.5\" 7mm Hard Disk for Computer P4-120
- 4 GB DDR3 Desktop ram,1600Mhz
Scriptronics 0.91 inch OLED Display Module IIC SSD1306 128x32 OLED Screen Driver DC 3.3V~5V for Arduino ESP32 ESP8266 AVR PIC STM32 for Raspberry pi (Pack of 2) - Product Features
- Interface: I2C
- Driver: SSD1306
- Resolution: 128x32
- Display color: White
- Operating voltage: 3.3V / 5V
Raspberry Pi Pico GPIO Expantion Board - Product Features
- GPIO Expansion Board Main Features:
- 2 X Independent Controlled Led, 1 X Power Led, 1 X Independent Controlled Push Buttons.
- Easy to interface: Male and Female Berg Connection Interface ( Jumper cable connectors ).
- Can Connect with all the variants of Sensors / Modules.
- Pack Includes: 1 X GPIO Expansion Board
Embeddinator 8051 Microcontroller Development Board with USB Programmer Combo - Product Features
- Screw terminal for External power Supply (with Jumper Select Option) and External Power Supply range of 7V to 20V with 7805 on board for Internal +5v Supply
- Compact and Ready to use design and Professional Glass PCB Layout Design for Noise Reduction with Board Supports ATmel 8051, 8052, 8032/31 Series Microcontrollers
- On board Two Line LCD Display (2x16), Two multiplexed 7-Segment LED Display, Built in Switches (8 keys), Built in 8 LED Interface to test I/O, on Board Reset buttons, Bluetooth Interface (HC-05), Buzzer
- All Port 32 Pins are Breakout Pins are available at male bugs Connector which can be used as main board for developing applications
HMD Collections STM32F030F4P6 core board development board core ARM CORTEX-M0 - Product Features
- Input Voltage: 3.3 V
- Output Voltage: 5-3.3 V
- CPU ARCHITECTURE: RM CORTEX-M0
- MICROPROCESSOR MODEL: STM32F030F4P6
- Dimensions: 48 x 30 x 8 (LxWxH) mm.
MSI Z390-A PRO LGA1151 (Intel 8th 9th Gen) M.2 USB 3.1 Gen 2 DDR4 HDMI DP CFX Dual Gigabit LAN ATX Z390 Gaming Motherboard - Product Features
- Supports 9th i9-9900K, i7-9700K, i5-9600K and 8th Generation Intel Core / Pentium Gold / Celeron processors for LGA 1151 socket
- Supports dual channel DDR4 Memory, up to 4400(OC) MHz
- Turbo M.2: PCI-E Gen3 x4 interface maximizes performance for NVMe SSDs
- Core Boost, 8+4 pin CPU power connector, DDR4 Boost
- Built for reliable operation
Intel Pentium Gold G6400 LGA1200 Desktop Processor 2 Cores up to 4.0GHz 4MB Cache Bundled with Prime H410M-CS LGA 1200 Micro-ATX Motherboard - Product Features
- Entry level PC has never been this good with the new Intel Pentium Gold G6400. The Processors comes with dual core and 4 threads enabled with hyper threading so that each core can handle more instruction execution than the normal rate.
- With up to 4.0 GHz burst frequency, the processor provide up to 46% better overall system performance compared to a three-year-old system and give the computing power and visual experience users have wanted.
- All this paired with 4 MB of Intel Smart Cache. It has a TDP rating of 58W with maximum 128GB of dual-channel DDR4 support for up-to 2666Mhz with Intel top notch security features.
- ASUS Prime H410M-CS motherboard is designed to support the 10th Gen Intel Core processors with DDR4 memory up to 64GB with Dual Channel Memory Architecture.
- Prime H410 series is engineered with an array of hybrid fan headers to ensure your rig stays cool and stable under intense workloads. Fan Xpert software provides comprehensive control over system fans.