Electronics Store - Computer Peripherals - Components - Motherboard

• Driver IC: ILI9225; Display Size: 2.0?
• Input Voltage: 3.3 to 5V; Pixel Resolution: 176 x 220
• Interface Type: SPI; Support analog SPI and hardware SPI
• The LCD has a wide viewing angle, the contrast is also very suitable.; Good quality display.
• PCB Size in mm:- Length: 62mm; Width: 38mm; Approx Weight: 20gm

• Supports 8th Gen Intel Core / Pentium Gold/ Celeron Processors for LGA 1151 socket
• Supports DDR4 Memory, up to 2666MHz, X-Boost: Software that auto-detects and allows you to boost the performance of any storage or USB device
• Audio Boost: Reward your ears with studio grade sound
• EZ Debug LED: Easiest way to troubleshoot. Core Boost: with layout and fully digital power design to support more cores and provide better performance
• PCI-E Steel Armour: Protecting VGA cards against bending and EMI for better performance, stability and strength

• 32GB Dual DDR4-SDRAM
• Micro ATX form factor
• Ports: 2 x USB2.0 , 2 x USB3.0 (3.1 Gen 1) Type-A, 1 x Ethernet LAN (RJ-45), 2 x PS/2, 1 x VGA (D-Sub), 1 x HDMI
• Chipset: Intel H310
• Flexible controls for quietness, plus GPU-temperature sensing for cooler gaming

• Supports 10th Gen Intel Core Series Processors.Dual NVMe PCIe Gen3 X4 M.2 Connectors.
• 4 Display Interfaces Support.
• Q-Flash Plus Update BIOS without Installing the CPU?Memory and Graphics Card

• This Product Listing is Created By \"BEpeojectIdea.blogspot\". | Please Buy ORIGINAL Product From \"beprojectidea.blogspot\" Store.| NO SUPPORT will be Given for FAKE / CLONE Products Sold by OTHER STORES.
• SIZE : 20x4 (4 Rows and 20 Characters Per Row) | Can display 4-lines X 20-characters Operate with 5V DC
• LCD display module with YELLOW Backlight Wide viewing angle and high contrast

• High Quality Main driver chip L298N, strong driving ability, strong anti-interference, low calorific value, after flow diode protection, more stable and reliable for Arduino projects
• Highly Efficient Double H bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors, high efficient
• Easy to Use No assembly required. This L298N board comes ready to go. Just wire up motors and power, easy to use
• SpecificationsExternal size 43*43*28mm / 1.69*1.69*1.06 inch, voltage 5V-35V, drive current 2A (Max single bridge)
• Wide Usage Great for for Arduino DIY Smart Car Robot Power UNO MEGA R3 Mega2560 Duemilanove, if driving voltage is more than 12V, use external standard 5volt TTL outputs to switch the H-bridge circuits

• Supports 9th & 8th Generation Intel Core Processor
• Intel B360 single chip architecture
• Support M.2 SATA III (6Gb/s) Connector
• Support 2-DIMM DDR4-1866/2133/2400/2666 up to 32G maximum capacity
• Support 12 x PCIe 3.0 slots
• Bios settings must be adjusted to support 12 GPUs
• Only 8th and 9th gen LGA 1151 CPUs with Intergrated graphics are compatible

• Supports AMD AM4 Socket RyzenTM 2000 AND 3000 Series processors
• Intel Wi-Fi 6 802.11ax (2.4Gbps) + BT 5, Intel Gigabit LAN
• Supports DDR4 4666+ (OC)
• 3 PCIe 4.0 x16, 2 PCIe 4.0 x1
• 3 USB 3.2 Gen2 (Rear Type A+C, Front Type-C), 8 USB 3.2 Gen1 (2 Front, 6 Rear)

• Designed for 9th 8th generation Intel Core processors maximize connectivity and speed with dual M.2, USB 3.1 Gen 2, onboard 802.11ac Wi-Fi and ASUS Optimum II for better DRAM overclocking stability
• Revamped 5-Way Optimization overclocks intelligently based on smart prediction and thermal telemetry while FanXpert 4 delivers dynamic system cooling
• Twin 8-phase power design and improved VRM cooling solution provides better cooling than previous generation platforms
• Gamer's Guardian ensures component longevity with Safe Slot, ESD Guards and DRAM Overcurrent Protection
• Pre-mounted I/O shield ensures streamlined installation and represents ROG's attention to detail and quality

• 12/24 VOLT OPERATING VOLTAGE
• 0 TO 50 SECOND VARIABLE TIMER (USER CAN CHANGE) & 30 CM FIX SENSOR RANGE
• AUTO CUT MODE ENABLED, SUITABLE FOR INDOOR/OUTDOOR,
• ON BOARD RELAY WITH BACK VOLTAGE PROTECTION SEPARATE PUMP & SOLENOID VALVE CONNECTOR

• High Speed PCI-E 4.0 : With latest Ryzen 3000 series processors to unleash speed twice than that of PCI-E 3.0
• USB3.2 GEN2 : 10Gbps transfer rate available
• RGB Header : RGB fans and strip can be connected into RGB SYNC system
• ESD Protection : Prevent potential electrostatic discharge damage
• UEFI Bios Support : Easy setting to customize your PC

• Compact Design
• Engineered to perfection
• High Density Glass Fabric PCB

• Supports 11th and 10th Gen Intel Core Series Processors
• Dual Channel Non-ECC Unbuffered DDR4, 4 DIMMs
• Direct 12+1 Phases Digital VRM Solution with 50A DrMOS
• Shielded Memory Routing for Better Memory Overclocking
• Enlarged VRM Heatsink with Air-Flow Grooving to Increased Surface Contact

• Pins are clearly labeled and 500mA self fuse for protection
• Two data transmission indicators can monitor data transfer status in real time
• Reserve 3.3V and 5V pin interface,easy for different voltage system that need power
• The entire board is coated by high quality transparent heat-shrinkable sleeve, making the PCB contained in insulation
• Package includes 1 piece USB To RS232 TTL PL2303HX Auto Converter Module

• M.2

• 320×480 resolution, better display
• Lightweight and easy to install
• 1 x 3.5\" Touch-Screen LCD Raspberry Pi
• Works with Raspbian/Ubuntu directly
• Comes with full set of screws and nuts for assembly

Popular Categories on BuyBestBrands.in