DIYmall 2pcs 915MHz LoRa32 V3 ESP32 S3 WiFi+BT Development Board with 5DBi LoRa Antenna 0.96" OLED Display SX1262 LoRa Kit forMeshtastic IoT - Product Features
- LoRa + WIFI + BLE + OLED display classic IoT dev-board, perfect for-Meshtastic LoRaWAN
- MCU: ESP32-S3, LoRa Chip: SX1262, USB Socket: Type-C
- Onboard SH1.25-2 battery interface, support 3.7V lithium battery to power, lithium battery not inlcuded, recommended for type C 5V power
- It is the best option for smart cities, farms, homes, industrial control, house security, wireless meter reading, and IoT developers
- What you will get: 2 X ESP32 Lora V3 OLED development board + 2 X 915MHz LoRa Antenna with U.FL/IPEX to SMA Connector Cable + 2 X JST 1.25mm-2P Connector + 2.54 pin ( NO soldering, soldering required )
DIYmall Nextion Display UART HMI Intelligent LCD Display Module TFT Resistive Touch Panel for Arduino Raspberry Pi ESP8266 (2.8inch-NX3224T028) - Product Features
- Software is Nextion editor, download link: https://nextion(dot)tech/nextion-editor/
- You can find editor guide, instruction, datasheet from this link https://nextion(dot)tech/
- Feature: 2.8\" TFT 320X240 resistive touch screen display, 4M Flash, 2KByte RAM, 65k colors.
- *Nextion TFT board uses only one serial port to do communicating. Let you get rid of the wiring trouble
- What you will get : 1PCS 2.8'' Nextion NX3224T028, 1PCS 4P Cable and 1PCS USB to 2P connector
Itead Nextion 2.4'' UART HMI Smart LCD Module Display NX3224T024 for ESP8266 - Product Features
- Software is Nextion editor, download link: hhttps://nextion.tech/nextion-editor/
- Instruction: https://nextion.tech/instruction-set/
- Feature: 2.4\" TFT 320X240 resistive touch screen display, 4M Flash, 2KByte RAM, 65k colors
- What you will get : 1PCS 2.4'' Nextion NX3224T024, 1PCS 4P Cable and 1PCS USB to 2P connector
ESP32-S2 Saola 1R Dev Kit Featuring ESP32-S2 WROVER, 4 MB SPI Flash 2 MB PSRAM, Small-Sized ESP32-S2 Based Development Board for Arduino ESP-IDF - Product Features
- Equipped with ESP32-S2-WROVER,small-sized ESP32-S2 based development board.
- Most of the I/O pins are broken out to the pin headers on both sides for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-S2-Saola-1R on a breadboard.
- only supports ESP-IDF master or version v4.2 and higher.
- ESP32-S2 Saola 1R is a powerful, generic Wi-Fi MCU module that integrates ESP32-S2. It has a PCB antenna, a 4 MB external SPI flash and an additional 2 MB PSRAM.
DIYmall 0.96" Inch Blue and YellowI2c IIC Serial 128x64 OLED LCD OLED LED Module for Arduino Display Raspberry PI 51 Msp420 Stim32 SCR Micro:bit(Pack of 2pcs) - Product Features
- The screen is made in Taiwan, quality is much better, work with raspberry pi https://tech.scargill.net/ssd1306-with-python/
- The IIC address can be changed,it is convenient to use with different machines
- Four square holes are easy to install
- Document link:https://drive.google.com/open?id=0B8DSGdAr8_31UEItMmx6ZDJIOWs Datasheet link:https://drive.google.com/open?id=16FdmMveOURZ_KeF_rOV_bWhavkiRB5WZ