Motherboard By DORHEA

• The ESP32 CAM equips the ESP32 with everything necessary to program, run and develop on the wonderchip. Additionally, the board reserved the MPU6050,BME280 and an analog MIC.
• ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications.
• ESP32 CAM supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC, ultra-low power consumption, deep sleep current is as low as 6mA. It is an ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module.
• The esp32 kit module can work independently as the smallest system.
• Esp32 cam adopts Micro USB interface, convenient and reliable connection method, convenient to apply to various IoT hardware terminal occasions.

• ESP32-DevKitC ultra-Low power consumption, works perfectly for Arduino IDE.
• ESP32-DevKitC board with latest ESP-WROOM-32D module, the chip ESP32-D0WD is designed to be scalable and adaptive.
• Developers can either connect peripherals with jumper wires or mount ESP32-DevKitC V4 on a breadboard.
• ESP32 is a safe, reliable, and scalable to a variety of applications.
• ESP32-DevKitC most of the I/O pins are broken out to the pin headers on both sides for easy interfacing.

• High Quality - Good condition,with high quality ,great performance, solid construction.
• Bigger Angle - 160?Wide Angle could have great angle of view.
• Camera Specifications - The camera is capable of 2592 x 1944 pixel static images,and also supports 1080 p @ 30 fps, 720 p @ 60 fps and 640 x480 p 60/90 video recording,with 5MP OV5647 1080p webcam sensor.
• Widely Use - The camera module can fully compatible with Raspberry Pi 4 b 3 b+ / 3 b / 2b / A+ / B+,come with cable to connect raspberry pi Zero,widely use for car photographing, video recording, indoor and outdoor monitoring, aerial photography.
• CSI Interface - This interface uses the dedicated CSI interface, via the CSI bus, a higher bandwidth link which carries pixel data from the camera back to the processor.

• STM32F401CCU6 84Mhz, 64KB RAM, 256KB ROM
• 25MHZ high speed crystal oscillator & 32.768khz 6PF low speed crystal oscillator
• STM32F401CCU6 support for MicroPython programming with available MicroPython firmware; Support for programming development; Support C language programming development
• STM32F401CCU6 there are 3 buttons, reset key, BOOT0 key, user key

• ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime.
• ESP8266 CH340 chip, power your development in the fastest way combinating with NodeMcu Firmware; It's a IOT unit with all available resources on board, support smart link and smart networking.
• Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area.
• Smart hardwares easily, if you want to do some remote control projects, the cheap but useful NodeMCU board can help you. the embedded MCU and wifi functions let us be able to remotely control our hardwares.
• DIY a smart car : If together with the motor or servo extension board, one can diy a smart robot, e.g., rc car, tank chassis.

• The WeMos d1 mini ESP32 Pro development board, everything needed to program the latest ESP32 module (the ESP-WROOM-32), ESP32/32S WIFI Development Bluetooth ESP8266 Module CP2104 for Arduino.
• Different than ESP8266 Mini V2 and ESP8266 D1 Pro, the ESP32 D1 carries the ESP32-WROOM-32 module while keeping the same form factor.
• The DOIT esp32 devkit is a single chip solution that combines Bluetooth and 2.4 GHz Wi-Fi capabilities.
• The WeMos mini d1 family of boards is one of the latest additions to the ESP32- and ESP8266-based Internet Of Things (IoT) ecosystem.
• Together with a growing set of expansion boards (shields), the WeMos family is a great solution for building projects quickly using both the ESP8266 and ESP32 SoC.

• ESP32 shield 30P expansion board, supports two power supply : DC 6.5-16v and USB 5V
• The GVS output power supply can be 5V or 3.3V, which is more convenient to match the external 5V electronic module sensor.
• The breakout board is only fit for 30PIN ESP32. Please confirm your esp32 board pins width is coincide with the pin width of the breakout board
• ESP32 breakout board GPIO 1 into 2 only can compatible with 30 pins ESP32S ESP32 , just for ref asin: B086MJGFVV B086MLNH7N B086MGH7JV ; B0B18JQF16 B0B18MCYFH B0B18NK2MS
• This module is safe, reliable, and scalable to a variety of applications. Stable and highly reliable.Great contact and stable signal transmission for your esp32 board

Popular Categories on BuyBestBrands.in