Motherboard By MOOSETOE

• Kindly refer the product description before buying the product.
• 0
• 0
• 0
• 0

• Kindly refer the product description before buying the product.
• Drive TFT LCD on for Arduino DUE by just plugging into for Arduino DUE main board, no flying wires
• Compatible with 40-pin version LCD, which is commonly used in TFT DUE shield, and comptabile with 32-pin version LCD, which is commonly used in STM32 development board
• On board SD card slot, SPI flash footprint with adjustable CS selection,for upgrade include font IC to draw text to the LCD and also support SPI Flash library
• LCD power 3.3V and 5V selectable through solder jumpers

• Kindly refer the product description before buying the product.
• Based on Raspberry Pi interface design for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B
• CAN function, using SPI interface CAN controller MCP2515, with transceiver SN65HVD230
• RS485 function, UART control, half-duplex communication, transceiver is SP3485
• Reserved control interface for easy control by other controllers

• Kindly refer the product description before buying the product.
• These modules are ideally suited to adding a slightly different light display to your project.
• Each features two large contact pads suitable for threading with conductive thread allowing their intergration into all manner of textile based projects.
• Material: PCB
• Color: Purple

• Kindly refer the product description before buying the product.
• DT-BL10 and BLE coexistence module is a highly integrated single-chip low-power 802.11n wireless local area network (WLAN) network controller. It integrates RISC CPU, WLAN MAC, WLAN baseband supporting lT1R, RF and Bluetooth in a single chip. It also provides a bunch of configurable GPIOs, which are configured as digital peripherals for different applications and control purposes.
• The DT-BL10 WiFi module uses BL602 as the and BLE coexistence SOC chip. DT-BL10 WiFi module integrates internal memory for complete WIFI protocol functions. Embedded memory configuration also provides simple application development.
• DT-BL10 WiFi module supports standard 802.11 b/g/n/e/i protocol and complete TCP/IP protocol stack.
• Users can use it to add WiFi functions to the installed devices, or it can be regarded as an independent network controller.

• Kindly refer the product description before buying the product.
• A switch module installation forefront of collision, the module output low, there is no collision, the output high.
• Module reserved M3 mounting holes for easy fixing in a small car.
• with a light switch, there is a collision, lights, no collision, lights off.
• Module size: Approx.2.5cm x 1.3cm/ 0.94; x 0.51;

• Kindly refer the product description before buying the product.
• These modules are ideally suited to adding a slightly different light display to your project.
• Each features two large contact pads suitable for threading with conductive thread allowing their intergration into all manner of textile based projects.
• Material: PCB
• Color: Purple

Popular Categories on BuyBestBrands.in