Electronics Store - Computer Peripherals - Components - Motherboard

• NX2432T070 is a powerful 7.0'' HMI, a 7.0\" TFT 800?480 resistive touch screen display, 16M Flash, 3584 Byte RAM, 65k colors.It's easy to adapt Nextion family HMI to existing projects, you just need to provide it a UART. Uploading TFT file via sd card is faster than 4pin serial port, but pls check card is FAT32 format and no more than 32GB.
• Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface between a human and a process, machine, application or appliance. Nextion is mainly applied to IoT or consumer electronics field. It is the best solution to replace the traditional LCD and LED Nixie tube.
• This solution includes hardware part - a series of TFT boards and software part - Nextion editor. Nextion TFT board uses only one serial port to do communicating. Let you get rid of the wiring trouble. We notice that most engineers spend much time in application development but get unpleasant results.
• In this situation, Nextion editor has mass components such as button, text, progress bar, slider, instrument panel etc. to enrich your interface design. And the drag-and-drop function ensures that you spend less time in programming, which will reduce your 99% development workloads. With the help of this WYSIWYG editor, GUI designing is a piece of cake.

• FeatureTang Primer 20K core board uses GW2A-LV18PG256C8I7 as the main chip, which has rich internal resources such as high-performance DSP, high-speed LVDS interface and BSRAM memory.
• The core board is equipped with peripheral components such as DDR3 memory particles and power ICs, so that users can use the core board alone to quickly develop and verify projects for high-speed and low-cost applications.
• The Lite ext-board leads out many I0s through pin headers and PMOD interfaces, and users can easily connect other peripheral modules or circuits for secondary development.
• The Dock ext-board is equipped with a wealth of peripheral resources, such as onboard USB-JTAG & UART circuit, Ethernet PHY and RJ-45 connector, USB2.0 PHY, HDMI output interface, stereo output circuit and 3.5mm headphone connector, RGB Screen connector, DVP camera connector. ASINB0BNVQVHG6
• Minimalist IDEComapred with other FPGA IDE, the lDE which is used to develop Tang Primer 20K is really small, the hard disk capacity occupied after installation does not exceed 1G.
• WIKIwiki.sipeed.com/hardware/en/tang/tang-primer-20k/primer-20k.html

• item size:32.88cm*35.4cm
• suit for EATX Motherboard(30.5*33cm)
• package include:1*acrylic board,7*PCI Column,4*buttom pads,1*some screws.

• Raspberry Pi Pico Starte Kit Includes Pico Starter Kit, temperature and humidity sensor, gas sensor, color sensor, flame sensor, liquid sensor, moisture sensor, and sound sensor, etc. (19 accessories )
• Raspberry Pi Pico, A low-cost, high-performance microcontroller board with flexible digital interfaces, incorporates Raspberry Pi's own RP2040 microcontroller chip, with dual-core Arm Cortex M0+ processor running up to 133 MHz
• Embedded 264KB of SRAM and 2MB of on-board Flash memory.Tiny size, only 21mm*51mm, castellated module allows soldering direct to carrier boards, easy Integration.
• Raspberry Pi Pico Microcontroller Board with Pre-soldered Header, 26 multi-function GPIO pins, 2 SPI, 2 I2C, 2 UART, 3 12-bit ADC, 16 controllable PWM channels, 8 Programmable I/O (PIO) state machines for custom peripheral support
• Raspberry Pi Pico comes with a complete Rasberry Pi official C/C++ SDK, Micropython SDK, help you get started easily, and integrate it into end products quickly

• [LGA1155 CPU Socket]:This computer motherboard is designed with LGA 1150 socket for more stable performance.
• [16GB Dual-Channel DDR3]:Our mini itx motherboard support uses dual-channel DDR3 memory slots with a maximum memory capacity of 16GB.
• [Multiple Connections]: This PC motherboard has 10 USB2.0 ports (4 front USB2.0), provides VGA and HD multimedia ports, as well as 4 SATA2.0, PCI-E 16X, M.2, NVME_ M.2, and 1 DEBUG pin, to meet your needs for configuration.
• [Premium Motorboard]: This desktop motherboard also features a stable and accurate power supply. Multi-phase and power chipset improves CPU performance.
• [Thermal Design]:Our replacement motherboard are equipped with thermal armor for strong heat dissipation to ensure stable bus communication.

• CPU:INTEL SOCKET1700 FOR INTEL 12TH GEN CORE
• CHIPSET:INTEL B660
• MEMORY:4*DIMM MAX 128GB DDR4
• SLOTS:1*PCIE4.0X16;1*PCIE3.0X16;1*PCIE3.0X1
• VGA: HDMI/DP

• Core i5 650 3.20 Ghz 1st Gen Processor with Base Frequency 2.27GHz, Max Turbo 3.46GHz, 2Cores, 4 Threads, 4MB Smart-cache
• H55 Chipset Motherboard with VGA, HDMI, 6x 2.0 USB Ports
• 8GB DDR3 Ram
• 500 GB Hard Disk Windows 10 Trial OS / MS Office
• Ready to Use System. Already installed Assembled and activated Windows 10 & Updated all drivers. Also installed some utilities like Google Chrome, VLC Player, Winrar,

• 100% Brand new and high quality.
• 6 Months Quality Warranty
• Special skill and techniques required proper installation. Please check both the models and pictures before purchasing.

• Package: 1pcs Tang Nano 9K Board + 4.3 LCD Screen
• TANG NANO 9K is ENTRY-LEVEL FPGA KIT FOR RISC-V
• Logical Unit ( LUT4)?8640/Flip-Flop (FF)?6480/Shadow SRAMSSRAM ( bits )?17280/Block SRAM?468K
• BSRAM/BSRAM Quantity?26 /User Flash ( bits )?608K/ PSRAM ( bits )?64M
• High Performance DSP?Support 9x9,18x18,36x36bit/Smultiplier and 54 bits accumulator
• WIKI?wiki.sipeed.com/hardware/zh/tang/Tang-Nano-9K/Nano-9K.html

• Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
• Onboard SIM7000E module, controlled via UART, supports NB-IoT/eMTC/EDGE/GPRS communication.e-Paper interface, controlled via SPI, compatible with various Waveshare SPI e-Paper raw panels
• Breakout SIM7000E and e-Paper control pins, for connecting with host control boards like STM32.3.7V lithium battery port and charging circuit, provides power to SIM7000E module or external 3.3V system (5V system like Raspberry Pi requires another power supply)
• Onboard voltage translator, select 3.3V/5V operating voltage by switch.Provides Windows host code (based on Alibaba Cloud), make it easy to study/develop, or integrate it into IoT applications
• Comes with development resources and manual (examples for Raspberry Pi/STM32)

• Supports DDR4 4733+ (OC)
• Graphics Output: DisplayPort, HDMI
• 7.1 CH HD Audio (Realtek ALC887/897 Audio Codec)
• 4 SATA3, 1 Hyper M.2 (PCIe Gen4 x4 & SATA3)
• 6 USB 3.2 Gen1 (2 Front, 3 Rear Type-A, 1 Rear Type-C) Realtek Gigabit LAN
• Intel 802.11ac WiFi + BT 4.2

• Base Clock: 3.6GHz, Max Boost Clock: up to 4GHz, 6MB Cache, TDP: 65W, AMD Radeon Vega 8 Graphics
• Graphics Output : HDMI, DVI-D, D-Sub 7.1 CH HD Audio (Realtek ALC887/897 Audio Codec) 4 SATA3, 1 Ultra M.2 (PCIe Gen3 x4 & SATA3)*
• Combo Includes : AMD Ryzen 3 3200G and A320M-HDV R4.0 Motherboard prefitted
• AMD AM4 Socket 2 DIMMs, Supports DDR4 3200+(OC)* 1 PCIe 3.0 x16, 1 PCIe 2.0 x1
• Three-year warranty from VERGEENO. Three-year original warranty for remaining components from Intel/Asrock

• LoRa + WIFI + BLE + OLED display classic IoT dev-board, perfect for-Meshtastic LoRaWAN
• MCU: ESP32-S3, LoRa Chip: SX1262, USB Socket: Type-C
• Onboard SH1.25-2 battery interface, support 3.7V lithium battery to power, lithium battery not inlcuded, recommended for type C 5V power
• It is the best option for smart cities, farms, homes, industrial control, house security, wireless meter reading, and IoT developers
• What you will get: 2 X ESP32 Lora V3 OLED development board + 2 X 915MHz LoRa Antenna with U.FL/IPEX to SMA Connector Cable + 2 X JST 1.25mm-2P Connector + 2.54 pin ( NO soldering, soldering required )

• MOTHERBOARD INTERFACE- A55 motherboard adopts for AMD A55 chipset, supporting for AMD full range of processors with FM1 interface.The motherboard provides a VGA+DVI video output interface, in addition to a interface and a multi-channel audio interface.
• EXCELLENT DESIGN- Adopts Micro?ATX small board design, adopts 4?phase solid'state power supply design and is equipped with R56 ferrite inductor + ultra?low MOS, and each phase power supply is equipped with 2MOS to provide more pure current.
• ADVANTAGES- The motherboard provides 2 dual-channel memory slots that support DDR3 and a set of independent solid-state power supply modules. In terms of expansion, the motherboard provides a PCI-E X16 graphics card slot and a PCI-E X1 slot.
• WIDE COMPATIBILITY- The hard disk provides 4 SATA2 interfaces, and the interface provides 8 USB2.0 interfaces (4 need to be expanded), PS/2 mouse interface and PS/2 keyboard interface
• PROFESSIONAL AFTER-SALES SERVICE- We guarantee the product is brand new. Please feel to us if you have any problems about our product, then we will make every effort to resolve it for you,and give you a satisfactory answer.

• This kit includes the Pico-Relay-B, which is an industrial 8-Channel relay module with build-in power supply isolation, photocoupler isolation, and rail-mount protection enclosure, suitable for realizing wireless control functions safely and stably
• The Pi Pico W included comes with a wireless communication module, hardware of this module uses Infineon's CYW43439 wireless chip, which supports Wi-Fi 4 wireless networks in the 2.4 / 5 GHz band, making it the perfect solution for wireless network control and communication..
• RP2040 microcontroller chip designed by Raspberry Pi in UK. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz, 264KB of SRAM, and 4MB of on-board Flash memory
• USB 1.1 with device and host support, Low-power sleep and dormant modes, Drag-and-drop programming using mass storage over USB
• 26?multi-function GPIO pins, 2?SPI, 2?I2C, 2?UART, 3?12-bit ADC, 16?controllable PWM channels; 8?Programmable I/O (PIO) state machines for custom peripheral support

Popular Categories on BuyBestBrands.in