Electronics Store - Computer Peripherals - Components - Motherboard

• NUCLEO-F401RE is a Cortex-M4 development board, which is for the high-performance STM32F4 series. It also has mbed function
• ST Morpho expansion headers are also provided to connect all peripheral peripherals of the microcontroller
• The development board is designed Based on STM32F401RE, and the development board also integrates the ST-LINK/V2-1 emulation downloader (but only provides the external SWD interface), saving you the trouble of purchasing an emulator or downloader
• Can be connected to various Shield expansion boards, allowing you to easily and quickly add special functions
• ST provides a wealth of sample programs, allowing you to get started with STM32F4 microcontrollers more quickly. Come and unleash your creativity

• AMD AM4 Socket: Ready for Ryzen 5000 Series/ 4000 G-Series/ 3000 Series Desktop Processors
• Enhanced Power Solution: Alloy Chokes, military-grade TUF components, and DIGI+ VRM for maximum durability
• Comprehensive Cooling: Large VRM heatsink, M.2 heatsink, PCH fanless heatsink, hybrid fan headers, and Fan Xpert 2+ utility
• Ultrafast Connectivity: Dual M.2, PCIe 4.0, USB 3.2 Gen 2 Type-A, and front USB 3.2 Gen 1 Type-C support
• Made for Online Gaming: 1 Gb Ethernet, TUF LANGuard and Turbo LAN technology

• [High-performance DSP] Sipeed Tang Primer 20K Core Module board is sodimm package,uses GW2A-LV18PG256C8I7 as the main chip, and hasmultiple internal resources, such as high-performance DSP,high-speed LvDs interface and BSRAM resources, on-boardDDR3 and PMIC. Users could use this CM board for rapiddevelopment and verify, and it's suitable for high-speedand low-cost situations.
• [Run RISC-V Code] Users can burn the hardware code bitstream file ofPicoRV/Litex to Gw2A, and then use GW2A as acommon MCU. lt can run RISC-V code, conduct RISC-v soft core experiments
• [Verilog Design] Users use Verilog to design custom hardware func-tions on the basic of PicoRV/Litex lP core, and at thesame time use C language to write code running onPicoRV/Litex core.
• [Rich Peripheral interfaces]Sipeed Tang Primer 20K Dock is equipped with a wealth of pe-ripheral resources, such as onboard USB-JTAG & UARTperipheral , Ethernet PHY and RJ45 connector, USB2.0PHY?HDMIl output connector,Audio output circuit and3.5mm connector?RGB screen connector,DVP cameraconnector.
• [PMOD interfaces] Sipeed Tang Primer 20K Lite ext-board routes so many lOs todouble row pin headers and PMOD interfaces, with whichusers could easily connect other peripheral modules or cir-cuits for secondary development.

• Upgrade Replacement: This is the newest version of Creality's 4.2.7 32 Bit silent control board with original TMC2225 Trinamic stepper drivers which greatly reduce the sound of the stepper motors during use. This new 32Bit version has more memory to store more functions and features of Marlin firmware like thermal runaway protection, resume print, and many others.
• Thermal Runaway Protection: Optimized circuit, enabling thermal runaway protection to effectively solve heating problems.
• Eeay to Operate: With USB Port, can be Worked With E/Z/Y/X Axis Motor.
• Comes with a Fan: 4010 Axial Cooling Fan 24V 7000r/min?L150mm with 2.5 Terminal fit for all ender series.
• Note: It has the free unified firmware preconfigured for Ender-3. If you wanna install this board to Ender-3 Pro /Ender-5, you will need to flash the firmware. If you do not have the firmware please contact us!

• AMD AM5 Socket: Supports AMD Ryzen 7000 Series Processors
• DDR5 Compatible: 4*SMD DIMMs with AMD EXPO & Intel XMP Memory Module Support
• Sturdy Power Design: Direct 5+2+2 Phases Digital VRM Solution
• Stable Connectivity: 2*PCIe 4.0 x4 M.2, USB 3.2 Gen 1 Type-C
• Fast Networking: 2.5GbE LAN

• AMD AM5 Socket: Supports AMD Ryzen 7000 Series Processors
• 5-Year Warranty
• DDR5 Compatible: 4*SMD DIMMs with AMD EXPO & Intel XMP Memory Module Support
• Sturdy Power Design: Direct 8+2+1 Phases Digital VRM Solution
• Advanced Thermal Design & M.2 Thermal Guard: To Ensure VRM Power Stability & M.2 SSD Performance
• Stable Connectivity: 2*PCIe 4.0 x4 M.2, USB 3.2 Gen 2 Type-C
• Fast Networking: 2.5GbE LAN
• Fine Tuning Features: RGB FUSION 2.0, Supports Addressable LED & RGB LED Strips, Smart Fan 6, Q-Flash Plus Update BIOS without installing, CPU, Memory, and GPU

• FeatureTang Primer 20K core board uses GW2A-LV18PG256C8I7 as the main chip, which has rich internal resources such as high-performance DSP, high-speed LVDS interface and BSRAM memory.
• The core board is equipped with peripheral components such as DDR3 memory particles and power ICs, so that users can use the core board alone to quickly develop and verify projects for high-speed and low-cost applications.
• Lite ext-boardThe Lite ext-board leads out many I0s through pin headers and PMOD interfaces, and users can easily connect other peripheral modules or circuits for secondary development.
• Dock ext-boardThe Dock ext-board is equipped with a wealth of peripheral resources, such as onboard USB-JTAG & UART circuit, Ethernet PHY and RJ-45 connector, USB2.0 PHY, HDMI output interface, stereo output circuit and 3.5mm headphone connector, RGB Screen connector, DVP camera connector.
• WIKIwiki.sipeed.com/hardware/en/tang/tang-primer-20k/primer-20k.html

• [Package Content] You will get 3pcs ESP32-S3 2.4GHz Dual Mode WiFi Development Boards, enough for your daily use and replacement
• [Low Power Consumption] It supports 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, the peripheral is compatible with low-power hardware design, and the power consumption is only 10uA in deep sleep mode.
• [Power supply] The main controller supports two power supply inputs: USB and external 3.7V lithium battery with a maximum charging current of 500mA, both can be freely replaced. The battery can also be charged while USB is plugged in.
• [Small size] Compact size, various interfaces, easy to use, and can be directly applied to low-power IoT projects.
• [Easy to Program] The Leaf-S3 supports ESP-IDF, Arduino, Micropython and other methods.
• [Wiki] https://github.com/BPI-STEAM/BPI-Leaf-S3-Doc/blob/main/Example/Arduino/readme.md. If you have any questions, please post them on our forum: https://forum.youyeetoo.com/

• ESP32-IoT Board: An embedded system based on ESP32 with 32-bit Xtensa LX6 dual-core processor
• Operating system: It supports Webduino, Arduino, MicroPython as well as Scratch X programming environments
• BPI:bit has 25 LEDs on board, it can be controlled with a single GPIO
• The 9-axis MPU9250 sensor is placed on the BPI:bit board. and MPU9250 uses I2C 0x69 address
• Three power delivery modes: Micro USB port; 2-pin battery power supply socket and the gold finger
• Wiki: https://wiki.banana-pi.org/BPI-Bit. If you have any questions, please post them on our forum: https://forum.youyeetoo.com/

• Encryption Processor: The TPM is an independent encryption processor that connects to the motherboard's daughter board.
• Storage: The TPM 2.0 security module securely stores encryption keys, which can be created using encryption software such for Win BitLocker. The contents on PC of users can be protected from unauthorized access.
• For Motherboard: This TPM 2.0 module is suitable for motherboard platform12Pin(12 Pin 1). Some motherboards require the TPM module to be plugged in or updated to the latest BIOS to enable the TPM option. Only available on motherboard that supports TPM2.0.
• Ideal Replacement: This 12Pin SPI module is ideal replacement for your original damaged, non working, or poor performing TPM, which helps repair your device.
• Wide Application: In addition to the traditional boot encryption and hard disk encryption, you can also encrypt the login information and password of the system and application software.

• Made of acrylic material, transparent and more fashion.
• Easy to install, for ATX motherbard.
• Open style delivers better performance on cooling, compatibility and maintenance.
• Convenient for testing, overclocking or gaming; Support longer graphic card.
• This case has enough space for any big sized parts needed for the high performance PC.

• Supports 12th/13th Gen Intel Core, Pentium Gold and Celeron processors for LGA 1700 socket
• Supports DDR5 Memory, Dual Channel DDR5-6400+MHz (OC)
• Core Boost : With premium layout and digital power design to support more cores and provide better performance
• Lightning Fast Experience: PCIe 4.0, Lightning Gen4 x4 M.2 with M.2 Shield Frozr
• 2.5G LAN with Wi-Fi 6E Solution: Upgraded network solution for professional and multimedia use. Delivers a secure, stable and fast network connection

• Intel Socket LGA 1700?Support 13th and 12th Gen Series Processors
• Unparalleled Performance?Hybrid 6+2+1 Phases Digital VRM Solution
• Next Generation Storage?2*PCIe 4.0 x4 M.2 Connectors
• EZ-Latch?PCIe 4.0x16 Slot with Quick Release Design
• Fast Networks?2.5GbE LAN & Wi-Fi 802.11ac
• Extended Connectivity?Rear USB-C 5Gb/s, DP, HDMI, D-Sub
• Smart Fan 6?Features Multiple Temperature Sensors, Hybrid Fan Headers with FAN STOP
• Dual Channel DDR5?2*DIMMs XMP Memory Module Support

• [High-Performance SBC] BPI-M4 Berry is open source powerful single board computer, based on Allwinner H618 SoC with Quad-core ARM Cortex-A53 CPU and ARM Mali G31 GPU, onboard LPDDR4 2GB RAM 8GB eMMC, integrated Wi-Fi & BT Module.
• [Multifunctional interface] BPI-M4 Berry single board computer onboard 40 PIN header, 4x USB2.0 Type-A host, 1x USB2.0 Type-C OTG, 1x GbE Ethernet port, 1x full-size HDMI 2.0, 1x 3.5mm Audio & TVE jack socket, 1x MicroSD card slot, UART, SPI, TWI/I?C, PWM, PCM/I?S. M4 Berry can also be connected to the POE module of Ras-p-berry Pi.
• [Support 4K Encoding and Decoding] BPI-M4 Berry single board computer have excellent image processing capabilities, onboard HDMI2.0 interface (up to 4K@60Hz with HDR10, CEC, DDC, SCDC), HDMI digital Audio output. Meets a wide range of media servers, IoT and entertainment facilities.
• [Widely Application Scene] BPI-M4 Berry linux single board computer can be widely used to Media Center, IoT Smart Internet of Things, Intelligent speech recognition,wireless server, Industrial control and Intelligent robot.
• [Developed based on Linux] BPI-M4 Berry linux IoT development board support Ubuntu, Debian system. Getting Started: \"https://wiki.banana-pi.org/Getting_Started_with_BPI-M4_Berry\". installation video: \"https://www.youtube.com/watch?v=GAZsUDYL0DE\".
• [Wiki] Datesheet SDK Document download please click \"WayPonDEV\" store and ask the question. All after-sales questions, please leave the message to \"wpd#youyeetoo&com (#->@,&->.)\".

• Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
• 8GB LPDDR4 SDRAM
• 2.4GHz and 5.0GHz IEEE 802.11b/g/n/ac wireless LAN, Bluetooth 5.0, BLE
• True Gigabit Ethernet
• 2x USB 3.0 ports, 2x USB 2.0 Ports

Popular Categories on BuyBestBrands.in