Electronics Store - Computer Peripherals - Components - Motherboard

• AMD AM4 Socket and PCIe 4. 0: The perfect pairing for Zen 3 Ryzen 5000 & 3rd Gen AMD Ryzen CPUs
• Robust Power Design: 8+2 DrMOS power stages with high-quality alloy chokes and durable capacitors provide reliable power for the latest high-core-count AMD CPUs
• Optimized Thermal Solution: VRM and PCH heatsinks with ASUS Stack Cool 3+ design keep your system running reliably under heavy load by enhancing passive cooling capacity for critical onboard components.
• High-performance Gaming Networking: On-board WiFi 6 (802.11ax), Bluetooth V5.1 and 2.5 Gb LAN with ASUS LANGuard
• Best Gaming Connectivity: Supports HDMI 2.1 (4K@60HZ) and DisplayPort 1.2 output, featuring dual M.2 slots (NVMe SSD)one with PCIe 4.0 x4 connectivity, USB 3.2 Gen 2 front panel Type-C connector, USB 3.2 Gen 2 Type-C port
• Industry-leading Gaming Audio & AI Noise Cancelling Mic Technology: High fidelity audio from a SupremeFX S1220A codec with DTS Sound Unbound and Sonic Studio III draws you deeper into the action. Communicate clearly with ASUS AI Noise Cancelling Mic technology.
• Unmatched Personalization: Mini-ITX form factor, ASUS-exclusive Aura Sync RGB lighting, including RGB header and addressable Gen 2 RGB header for greater customization
• Please ensure your BIOS is up to date if installing a compatible Ryzen 5000 series CPU. Visit ASUS site search by motherboard model name, click on “Support" tab, Drivers and Tools, then BIOS & Firmware to download the latest BIOS.

• 5V power supply.
• Serial I2C control of LCD display using PCF8574.
• Backlight can be enabled or disabled via a jumper on the board
• Contrast control via a potentiometer
• Can have 8 modules on a single I2C bus (change address via solder jumpers)address, allowing.

• Resolution 320 x 240, RGB565 format
• SPI LCD data bus
• LCD controller ILI9341
• Touch panel controller STMPE6
• Expanded available I/O pins

• Kindly buy EnGeniusLabs ORIGINAL product from Embeddinator store. NO SUPPORT / REPLACEMENT will be given for FAKE / CLONE products sold by other stores.
• Infrared Sensor with Control Circuit Board The Sensitivity and Holding Time Can be Adjusted
• Working Voltage Range: DC 4.5V- 20V Current Drain: <60uA Detection Range: <140

• Designed for 9th and 8th generation Intel Core processors to maximize connectivity and speed with four M.2, USB 3.1 Gen 2, onboard 802.11ac Wi-Fi and ASUS Optimism II for better DRAM overclocking stability
• Revamped 5-way Optimization overclocks Intelligently based on smart prediction and thermal telemetry while Fan pert 4 delivers dynamic system cooling
• Dedicated water cooling headers allow for comprehensive monitoring of water temperature and flow
• Equipped with four M.2 slots to take full advantage of Intel first and NV Me RAID, featuring ROG DIMM.2 expansion
• Pre-mounted I/O shield ensures streamlined installation and represents ROG's attention to detail and quality

• Supports 10th Gen Intel Core Processors(Socket 1200)
• 9 Phase Dr. MOS Power Design
• Supports DDR4 2933MHz
• 2 PCIe 3. 0 x16, 1 PCIe 3. 0 x1, 1 M. 2(Key E) For WiFi
• AMD CrossFireX

• Kindly buy EnGeniusLab's ORIGINAL product from Embeddinator store. NO SUPPORT / REPLACEMENT will be given for FAKE / CLONE products sold by other stores.
• Compatible with RASPBERRY PI, ARM, AVR, PIC, 8051, etc - Can provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V.
• Specially Designed for Various Robotic Project without microcontrollers with Male berg strip given for connection & run properly & also Extra Berg strip given for GND, +5V & +9V for external connection.
• With Terminal Blocks for connecting motors & power supply and Berg Sticks for control signals from microcontroller
• Widely used in Robotics, Motor Driving Applications & Heavy Project Applications.

• Asus Prime X370-PRO Desktop Motherboard - AMD Chipset - Socket AM4 - ATX - 1 x Processor Support - 64 GB DDR4 SDRAM Maximum RAM - 2.93 GHz O.C., 2.67 GHz, 2.40 GHz, 3.20 GHz O.C., 2.13 GHz Memory Speed Supported - UDIMM, DIMM - 4 x Memory Slots - Serial ATA/600 RAID Supported Controller - 10, 1, 0 RAID Levels - CPU Dependent Video - 6 x USB 3.0 Port - HDMI - 7.1 Audio Channels - Gigabit Ethernet - 3 x PCI Express x1 Slots - 3 x PCI Express x16 Slots - 8 x USB Ports - S/PDIF - DisplayPort -

• LGA1151 Supports 9th and 8th Generation Intel Core Processors
• Chipset: Intel Z390
• Memory: 4x DDR4 DIMM Slots, Dual Channel, Non-ECC, Unbuffered, Max Capacity of 64GB
• Slots: 2x PCI-Express 3.0 x16 Slots (run single at x16 or dual at x16/x4), 3x PCI-Express 3.0 x1 Slots (Flexible PCIe)
• Multi-Graphics: Supports AMD Quad CrossFireX, CrossFireX Technology

• 1. Made of aluminum alloy, metallic feel and durable;
• 2. Easy installation;
• 3. With USB interface hole, Ethernet interface hole, audio interface hole, HDMI interface hole, and power interface hole, perfect fit for Raspberry Pi 3B+/3B/2B;
• 4. With exhaust holes on the surface, it can reach perfect heat dissipation.
• Applicable models: for Raspberry Pi 3B+/3B/2B

• The AMD Ryzen 7 3800X is designed to offer Extreme gaming level. The 8 Cores and

• Intel Socket 1151 for 8th Generation Core Processors
• Integrated Graphics Processor- Intel HD Graphics support
• 4 x DIMM, Max. 64GB, DDR4
• 6 x USB 3.1 Gen 1 port(s) (4 at back panel, blue, 2 at mid-board)
• Supports HDMI with max. resolution 4096 x 2160 @ 24 Hz

• intel i5 3470s processor (heavy duty processor)
• Heavy Duty Motherboard
• Ram 8gb DDR3
• ATX CABINET, without hard disk
• Good performance

• The use of STM8 industrial control center microcontroller.
• Strong and weak electricity through optocoupler insulation safe operation.
• The power line and foot switch line adopts the bolt the quick connect terminal more convenient and reliable.
• Input time current using high-precision simple potentiometer to ensure reliable convenient input
• On-board power supply state foot trigger indicator work status clearly visible.
• Warranty not applicable for this product

• Kindly buy EnGeniusLab's ORIGINAL product from Embeddinator store. NO SUPPORT / REPLACEMENT will be given for FAKE / CLONE products sold by other stores.
• Equipped with high-current relay 7A@250V AC / 10A@28V DC. 2. It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc., with High Voltage handling capacity of 220V AC with full protection.
• High quality screw terminals (Terminal Block) provided (COM, NC , NO) for quick and easy connection.& 3 pin Male header for easy interface with microcontroller.
• Input Signal Pin connected to Burg stick for easy accessibility & LED Status indicators to indicate the relay ON/OFF status with Mounting holes provided for easy mounting.
• Compatible with Raspberry Pi, Arduino, AVR, PIC, ARM, 8051....

• The Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight.
• By connecting the amplifier to your microcontroller you will be able to read the changes in the resistance of the load cell and with some calibration youll be able to get very accurate weight measurements.
• This can be handy for creating your own industrial scale, process control, or simple presence detection.
• The HX711 uses a two wire interface (Clock and Data) for communication.
• Any microcontrollers GPIO pins should work and numerous libraries have been written making it easy to read data from the HX711.

Popular Categories on BuyBestBrands.in