Electronics Store - Computer Peripherals - Components - Motherboard

• Powers devices such as watches, calculators, sporting goods, games, medical devices, and more
• Long-lasting, reliable battery life; performs in extreme temperatures
• Engraved with battery model for easy identification
• Ideal for vernier callipers Laser Pointer, Hearing Aids, Insulin Pumps, Heart Rate, Monitor, Watches, Cameras, Calculators, Car Security Alarm, Keyless Car Remotes, Organizers, Glucometer, Computer Equipment (memory backup battery) CMOS, Toys, Communication Equipment, data pack for video cameras, and other devices that requires this battery size!

• Transmission speed supports USB3.0 GEN1 5Gbps, USB3.1 GEN2 10Gbps.
• The product is suitable for TYPE?E male to TYPE?C female adapter cable.
• The motherboard USB3.019PIN/2OPIN pin header is turned to TYPE?C socket.
• It is suitable for front or rear TYPE?C interface expansion of the chassis.
• This product can be plug and play, no need to drive, it is more convenient to use.
• Warranty not applicable for this product

• 1.8inch full color TFT LCD display screen with 128X160 resolution will provide you good display effect.
• Horizontal or vertical screen can be adjusted.
• Equipped with ST7735 controller chip and support 3.3V power supply.
• The display has high contrast, extremely wide viewing angle.
• No backlight needed, the display unit can emit light.

• The module can be configured as either 8 single-ended inputs or 4 differential inputs ADS1256 module is suitable for measuring analog voltage within 3V.
• On-board high precision TI ADS1256IDB ADC chips.
• On-board ADR03 2.5V datum voltage source chips.
• Data output rates up to 30ksps, nonlinearity is low to ?0.0010%.
• ADS1256 module is suitable for measuring analog voltage within 3V; Module operating voltage is 5V.

• ASUS
• H110IPLUSCSM

• Wireless 802.11 b/g/n standard
• Wi-Fi at 2.4GHz, support WPA / WPA2 security mode
• Built-in TCP/IP protocol stack to support multiple TCP Client connections (5 MAX)
• Transfer rate: 110-460800bps
• Support UART / GPIO data communication interface

• Type: PC Computer Motherboard Internal Code Beep Buzzer Mini Speaker
• Length:Approx. 6cm/2.36''
• Function: These are the speakers used to obtain beep codes from motherboards,alarm systems and other electronics.
• Plug-n-Play compliant.

• Low power consumption
• Power supply for 2 ~ 5.5V DC
• Can replace the traditional touch of a button
• Four M2 screws positioning holes for easy installation

• 5V 8-Channel Relay interface board, each one needs 15-20mA Driver Current; Equiped with high-current relay, AC250V 10A ; DC30V 10A
• Each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground.
• With power indicator,8-way road has a status indicator. With a relay coil to absorb the diode protection.
• Standard interface that can be controlled directly by microcontroller (Uno , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
• The 8 channels are optically isolated, safe, reliable, anti-interference. Widely used for all MCU control, industrial sector, PLC control, smart home control

• Lga1200 socket for 10th generation intel core desktop processors
• Optimization: system-wide automated optimization, which provides overclocking and cooling profiles tailored to your rig
• Cooling: dedicated water cooling zones, m.2 heat sink and various fan controls
• Connectivity: marvell aqtion 10gb, intel 2.5gb ethernet, langaurd, quad m.2, USB 3.2 gen 2 and intel Wi-Fi 6
• Synchronized RGB lighting technology works with a broad portfolio of aura sync compatible PC devices and includes support for addressable light strips and philips hue

• Microcontroller: ATmega328, SRAM: 2 KB, EEPROM: 2 KB
• Digital I/O Pins: 14, PWM Pins: 6, Analog Input Pins: 6
• UART: 1, SPI: 1, I2C: 1
• DC Current per I/O Pin: 40mA
• Flash Memory: 32KB of which 2 KB used by bootloader. Clock Speed: 8 MHz (3.3V versions) or 16 MHz (5V versions)

• This PCI PCI-E 2LPC four-in-one diagnostic card is a computer motherboard testing card
• Multi-function LED indicator can display the status of power supply, motherboard, CPU, memory, image card, hard disk
• Possess high recognition rate, can automatically identify the power module, accurate and fast
• The product can detect multi-channel, support PCI PCI-E LPC motherboard, very practical
• Diagnostic card is easy to use and simple to operate, supports all PCI slots, and is widely used
• Warranty not applicable for this product

• There is a normally open and one normally closed contact.
• The control DC or AC signal, you can control 220V AC load.
• Blue KF301 terminals to the control line is more convenient.
• With the power supply and relay instructions, pull off, disconnect does not shine.
• The module complies with international safety standards, the control area and the load region isolation trench.

• High quality ARM development board.
• Power supply, 9V-12V
• USB-FT232 Driver.
• Raspberry Pi expansion connectors.
• 6 Channel 5V to 3.3V Bi-directional level converter

Popular Categories on BuyBestBrands.in