Buy Online Motherboard from BuyBestBrands.in in Association with Amazon India



Electronics Store - Computer Peripherals - Components - Motherboard

5PCS ESP32 38Pin Development Board ESP-32S Microcontroller Processor Integrated 2-in-1 Microcontroller ESP-WROOM-32 Chip CP2102 WiFi NodeMCU-32S ESP-WROOM-32 Compatible with Arduino IDE - Product Features
  • The onboard CP2102 stable USB to TTL chip ensures the normal communication of the serial port.
  • Compatible with ESP32 ?SupportThree Modes: AP, STA, and AP+STA
  • Support automatic download, no need to manually switch download and running mode.
  • Support development on Windows system (cygwin and msys32 simulation environment) and Linux system
  • ESP-WROOM-32 is a general-purpose Wi-Fi+BT+BLE MCU module with powerful functions and a wide range of uses. It can be used for low-power sensor networks and demanding tasks, such as voice encoding, audio streaming, and MP3 decoding Wait.
 
with Pre-Soldered Header Luckfox Pico Max Linux Micro Development Board RV1106G3 Chip 256MB Memory, Integrates ARM Cortex-A7/RISC-V MCU/NPU/ISP Processors, with Rich Interfaces - Product Features
  • Luckfox Pico Max 256MB Memory is RV1106G3 Chip Linux Micro Development Board (with Pre-Soldered Header ) , integrates ARM Cortex-A7/RISC-V MCU/NPU/ISP Processors, with Rich Interfaces MIPI CSI/ GPIO/ UART/SPI/I2C/USB, etc, which is convenient for developing and debugging quickly
  • Single-core ARM Cortex-A7 32-bit core with integrated NEON and FPU. Built-in Rockchip self-developed 4th generation NPU, features high computing precision and supports int4, int8, and int16 hybrid quantization. The computing power of int8 is 0.5 TOPS, and up to 1.0 TOPS with int4.
  • Built-in self-developed third-generation ISP3.2, supports 5-Megapixel, with multiple image enhancement and correction algorithms such as HDR, WDR, multi-level noise reduction, etc.
  • Features powerful encoding performance, supports intelligent encoding mode and adaptive stream saving according to the scene, saves more than 50% bit rate of the conventional CBR mode so that the images from camera are high-definition with smaller size, double the storage space.
  • Built-in 16-bit DRAM DDR3L, which is capable of sustaining demanding memory bandwidths. Integrated with built-in POR, audio codec and MAC PHY.
 
DORHEA ESP32 Cam WiFi Bluetooth Development Board with OV2640 Camera Module + Micro USB to Serial Port CH340C 4.75V-5.25V Nodemcu for Raspberry Pi - 3 Set - Product Features
  • The ESP32 CAM equips the ESP32 with everything necessary to program, run and develop on the wonderchip. Additionally, the board reserved the MPU6050,BME280 and an analog MIC.
  • ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications.
  • ESP32 CAM supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC, ultra-low power consumption, deep sleep current is as low as 6mA. It is an ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module.
  • The esp32 kit module can work independently as the smallest system.
  • Esp32 cam adopts Micro USB interface, convenient and reliable connection method, convenient to apply to various IoT hardware terminal occasions.
 
3 idea Imagine Create Print Motherboard for Photon M3 Max - Product Features
  • Original Photon M3 max motherboard Mainboard 3d Accessories for LCD 3D Printer
 
GIGABYTE B550M AORUS Elite (AM4/ AMD/ B550/ Micro-ATX/ DDR4/ Dual M.2/ PCIe 4.0/ Realtek GbE LAN/Gaming Motherboard) - Product Features
  • AMD Socket AM4: Supports AMD Ryzen 5000 Series/ Ryzen 5000 G-Series/ Ryzen 4000 G-Series and Ryzen 3000 Series Processors
  • DDR4 Compatible: Dual Channel ECC/ Non-ECC Unbuffered DDR4, 4 DIMMs
  • Commanding Power Design: 5+3 Phases Pure Digital VRM Solution with Low RDS(on) MOSFETs
  • Cutting-Edge Thermal Design: Ultra Durable PCIe 4.0, Enlarged MOSFET Heatsink
  • Next Gen Connectivity: PCI 4.0, Dual NVMe PCIe 4.0 x4 M.2
  • Fast Networking: Realtek GbE LAN
  • Fine Tuning Features: RGB FUSION 2.0, Supports Addressable LED & RGB LED Strips, Smart Fan 6, Q-Flash Plus Update BIOS without installing, CPU, Memory, and GPU
 
EMIHO 12V Tilt Trim Relay Compatible with Evinrude Johnson 15HP-300HP Outboard (AA AB AF AG AH Models 2004-2012) Replace 0586767, Electrical Relay Switch - Product Features
  • Compatible Models: Fit for Evinrude Johnson 15HP-300HP Outboard (AA AB AF AG AH Models 2004-2012), fit for E15 E25 E30 E40 E50 E60 E65 E75 E90 E105 A115 E115 E130 E135 DE150 C150 E150 C175 E175 A200 C200 DE200 H200 E200 H225 DE225 E225 A250 DE250 H250 E250 A300 DE300 H300 E300
  • Replacement Part Number: Replace 586767 0586767 R767 240-22156, please confirm whether your model is suitable before purchasing
  • Perfect Operation: The 12V tilt trim relay has passed 100% quality inspection before leaving the factory. It is precisely manufactured and has stable performance. It can accurately control the correct current consumption of the tilt trimmer motor in any harsh environment. It can be used on all suitable models. Works flawlessly, saving you time and money
  • Cost-effective: The exterior of the relay is made of high-quality ABS plastic, which has good durability and corrosion resistance, and effectively protects the normal operation of the internal circuit. The internal circuit has been repeatedly tested and improved by multiple models, with stable operation and longer service life
  • Products Include: 1 x tilt trim relay. Easy to install, you only need to connect the ground wire and power wire and two quick-connect plugs, directly replace your old parts, if you have any questions about this product, please contact us in time
 
NanoPi Duo2 Open Source Allwinner H3 Quad-core Cortex-A7 1.2GHz Single Board Computer with DDR3 512M RAM Onboard WiFi Bluetooth Module Support WiringNP Python for IOT Application Development - Product Features
  • [Dual-in-line] NanoPi Duo2 is a dual-in-line ultra-small maker artifact with a size of only 55x25.4mm. It uses Allwinner quad-core A7 processor H3, equipped with 256M/512M DDR3 memory, onboard WiFi Bluetooth module, and provides OV5640 camera interface, which can run a complete embedded Linux system such as Ubuntu Core.
  • [Small and Exquisite] NanoPi Duo2 can be directly powered by MicroUSB, supports Micro SD card to directly start the operating system, and can be directly inserted into a breadboard for use.
  • [Rich interfaces] It leads out USB, SPI, UART, I2C, PWM, IR, audio input and output, 100M Ethernet and other interface pins, which is very convenient for debugging and development.
  • [Open Source & Rich Resources] NanoPi Duo2 can support the use of RPi.GPIO, WiringNP, Python and other programming libraries. It is completely open source and very suitable for lightweight IoT application development.
  • [OS/Software] U-boot, Linux-4.14 / Linux-3.4, Ubuntu 16.04.2 LTS (Xenial)
  • [Wiki] https://wiki.friendlyelec.com/wiki/index.php/NanoPi_Duo2; Any after-sales problems, please contact us by email: monica#smartfire.cn (#->@).Also can click WayPonDEV store and ask a question or leave the message in our forum by \"forum.youyeetoo .com/\".
 
Zahara I/O IO Shield Motherboard Backplate Bracket Replacement for MSI 970 Gaming, 970 Gaming PRO - Product Features
  • 100% Brand new and high quality
  • This Product Are Tested Before Shipping
  • Easy for you replace your faulty,cracked or broken one ,seller remind that you should replace this in the off state.
  • Special skills and techniques required for proper installation.
  • If you have any questions, please be sure to contact us.We will definitely solve the problem for you!
 
Zahara Power Switch Button IO Board for Asus TP300 TP300L TP300LA TP300LD TP300LJ 60NB05Y0-IO1070 - Product Features
  • 100% Brand new and high quality
  • Board as the picture
  • If you have problems within 6 months after purchasing the product, please contact us for repair.
  • Special skill and techniques required for proper installation
  • Please check both the model and picture before purchase
 
Waveshare LuckFox Pico Plus RV1103 Linux Micro Development Board, Integrates ARM Cortex-A7/RISC-V MCU/NPU/ISP Processors, with Ethernet Port - Product Features
  • Without yellow pre-soldered header. Luckfox Pico Plus is a cost-effective Linux micro development board, based on the Rockchip RV1103 chip to provide a simple and efficient development platform for developers; Supports a variety of interfaces including MIPI CSI, GPIO, UART, SPI, 12C, USB, etc., which is convenient for developing and debugging quickly.
  • Single-core ARM Cortex-A7 32-bit core with integrated NEON and FPU. Built-in Rockchip self-developed 4th generation NPU, features high computing precision and supports int4, int8, and int16 hybrid quantization. The computing power of int8 is 0.5 TOPS, and up to 1.0 TOPS with int4
  • Built-in self-developed third-generation ISP3.2, supports 4-Megapixel, with multiple image enhancement and correction algorithms such as HDR, WDR, multi-level noise reduction, etc.
  • Features powerful encoding performance, supports intelligent encoding mode and adaptive stream saving according to the scene, saves more than 50% bit rate of the conventional CBR mode so that the images from camera are high-definition with smaller size, double the storage space
  • Built-in RISC-V MCU supports low power consumption and fast start-up, supports 250ms fast picture capture and loading AI model library at the same time to realize face recognition \"in one second\". Built-in 16-bit DRAM DDR2, which is capable of sustaining demanding memory bandwidths. Integrated with built-in POR, audio codec and MAC PHY
 
sb components Raspberry Pi Pico Board with Pico Single Channel Relay HAT Raspberry Pi Pico Relay Board for Raspberry Pi Pico, Raspberry Pi Pico Kit - Product Features
  • Raspberry Pi Pico is Raspberry Pi's first microcontroller board, designed especially for physical computing
  • It can be easily reprogrammed over USB from a Raspberry Pi or other computer using the C/C++ SDK or the official MicroPython port
  • Pico single channel relay hat loads up to 7A/250 VAC and 15A/120 VAC
  • Stackable design for easy interfacing with Raspberry Pi Pico
  • Pico single channel relay hat is specifically made to work with the Raspberry Pi Pico Board
 
MSI PRO H610M-S WiFi DDR4 Motherboard, Micro-ATX - Supports Intel Core 14th, 13th and 12th Gen Processors, LGA 1700 - DDR4 Memory Boost 3200MHz/MAX, PCIe 4.0 x16 Slot, M.2 Gen3 Slot, Wi-Fi 6E, BT 5.3 - Product Features
  • Intel Core 14th, 13th and 12th Gen - The PRO H610M-S WIFI DDR4 is a Micro-ATX motherboard outfitted with the Intel H610 chipset (LGA 1700, Intel Core 14th, 13th & 12th Gen); The VRM features MSI Core Boost technology for improved stability & performance
  • PASSIVE & AI COOLING - A chipset heatsink provides passive cooling; Frozr AI cooling automatically adjusts system fan settings based on CPU & GPU temperatures
  • DDR4 MEMORY, PCIe 4.0 x16 SLOT - 2 x DDR4 DIMM slots with Memory Boost isolated circuitry for overclocking (1DPC 1R, 3200 MHz); The PCIe x16 slot supports PCIe 4.0 (64GB/s) graphics cards and includes Steel Armor
  • GEN3 M.2 SSD STORAGE - The M.2 Gen3 x4 32Gb/s slot is designed to maximize NVMe based SSD performance; SSD storage reduces loading time
  • WI-FI 6E CONNECTIVITY - Network hardware includes a Wi-Fi 6E with Bluetooth 5.3 & 1Gbps LAN controller; Rear ports include USB 3.2 Gen 1 Type-A (5Gbps), HDMI 1.4 and 7.1 HD Audio with Audio Boost
 
Padarsey VR Voltage Regulator Thermal Module VRM Heatsink Compatible for Dell Alienware Aurora R11 R12 0N1C1D N1C1D - Product Features
  • 1) Compatible with Dell Alienware Aurora R11 R12 Gaming Desktop series.
  • 2) Manufacturer Part Number(s): N1C1D, 0N1C1D, CN-0N1C1D, HTSNK VR CPU R11 125W
  • 3) VRM HeatSink is the components that convert your 12V to the voltage your CPU needs.
  • 4) VRM heat sinks are essential to keep your system running at maximum efficiency and minimizing costly downtime and repairs.
  • 5) Each Pack come with 1x Voltage Regulator VRM HeatSink.
 
Coolwell Raspberry Pi Zero 2W to 3B Adapter, Use Zero 2W to Replace Raspberry Pi 3 Model B/B+ - Product Features
  • Easily compatible with the interfaces of Raspberry Pi 3B / 3B+ boards; Not compatible with the first generation Zero
  • Using pogo pin connection, the Zero 2W can be easily attached
  • Onboard headphone jack(extended from USB) and an additional speaker header
  • Onboard 4-ch USB ports, compatible with USB 2.0 / 1.1 transmission
  • Onboard RTL8152B Ethernet chip, support 1-ch RJ45 Ethernet port, 10 / 100 M adaptive
 


Facebook Twitter Instagram LinkedIn
© 2018 - BuyBestBrands.in All Rights Reserved