Electronics Store - Computer Peripherals - Components - Motherboard

• 2.4 GHz WiFi development board support Raspberry Pi Pico expansion board ecosystem to satisfy creative IoT application development, based on single-core 32-bit LX7 microprocessor ESP32-S2FH4, support clock frequency up to 240 MHz
• Onboard 0.96inch 160?80 pixels 65K color IPS LCD display, integrated 320KB SRAM, 128KB ROM, 8MB PSRAM, 4MB Flash memory, support IEEE802.11 b/g/n, on-board 2.4 GHz WiFi ceramic antenna, up to 150 Mbps data transfer rate
• USB-C connector, no more plug orientation problem, on-chip integrated full-speed USB OTG interface, LCD interface (8-bit serial RGB/8080/6800), TWAI controller (ISO11898-1 compatible), capacitive sensor GPIO, temperature sensor and RMT (TX/RX)
• Onboard single 3.7V lithium battery charge/discharge header, suitable for mobile IoT product design
• WiFi dev board with compact size, plenty peripheral interfaces, integrated low-power Wi-Fi System-on-Chip (SoC) and mass memory, castellated module allows soldering direct to user-designed carrier boards

• Adopts MCP2515 and SN65HVD230 dual chips combined solution, allows 2-channel CAN communication.Integrated power isolation, providing stable isolated voltage, requires no extra power supply for the isolated terminal
• Onboard digital isolator, signal isolation makes the communication more safe, more stable, and better anti-interference.Onboard TVS (Transient Voltage Suppressor) diode, provides ESD protection and transient peak voltage protection
• Onboard voltage translator, select 3.3V/5V operating voltage by jumper.
• Onboard 120 terminal resistor, configured by jumper
• Breakout SPI control pins, for connecting with host control boards like STM32/Arduino

• The Arduino MKR MEM Shield adds 2MB of storage space with a microSD card slot and provides a 2MB serial flash memory, enhancing the data logging and storage capabilities of MKR boards.

• Brand New X79 motherboard
• 4 channel DDR3 RAM

• Kharidiyebasic ram with 2 year replacement warranty
• Intel cpu processor core i5 with 1 year replacement warranty
• Intel brand fan with cooling paste
• All the products are tested and quality checked when assembled
• h61 chipset motherboard with 2 years warranty from zebronics authorised service centre

• 14TH, 13TH & 12TH GEN CORE - The PRO B760M-E DDR4 is a compact Micro-ATX motherboard outfitted with the latest Intel B760 chipset (LGA 1700, 14th, 13th & 12th Gen); The VRM features MSI Core Boost technology for improved stability & performance
• PASSIVE & AI COOLING - A chipset heatsinks provide passive cooling; Frozr AI cooling automatically adjusts system fan settings based on CPU & GPU temperatures
• DDR4 MEMORY, PCIe 4.0 x16 SLOT - 2 x DDR4 DIMM slots with Memory Boost isolated circuitry for overclocking (1DPC 1R, 4800+ MHz); Primary PCIe x16 slot supports PCIe 4.0 (64GB/s) and includes Steel Armor
• GEN4 M.2 CONNECTOR - Storage options include 1 x M.2 Gen4 x4 64Gbps slot for hyper-fast SSD access
• WELL CONNECTED - Network hardware includes a 1Gbps LAN controller; Rear ports include USB 3.2 Gen 1 Type-A (5Gbps), HDMI 1.4 and VGA, and 7.1 HD Audio with Audio Boost

• ATSAMD21G18 32-bit/48MHz ARM Cortex-M0+
• 256KB Flash Memory

• Mini Base Board For Compute Module 4.Suitable For Evaluating The Raspberry Pi CM4 Or Being Integrated Into End Products.Powerful functions in a credit card sized body
• Connecting With Compute Module 4.Standard CM4 Socket And Color-Coded Raspberry Pi 40PIN GPIO Header.Suitable For Compute Module 4 Lite/EMMC Series Module
• Compact, Yet Complete.Onboard Multiple Connectors Including:.CSI/DSI/FAN/HDMI/USB/RJ45 Gigabit Ethernet/Micro SD Card Slot/M.2 Slot

• Terminal Block Breakout Module - for BeagleBone, BeagleBone Black, BeagleBone AI, BeagleBone Black Wireless, BeagleBone Green, BeagleBone Green Wireless or SanCloud BeagleBone Enhanced.
• Terminal block pitch 3.5mm/0.138\", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper.
• With power on LED indicating, with Power, Reset and Boot buttons on the side.
• The item has been soldered and assembled.

• EXCELLENT COMPUTER REPAIR TOOL-PC LCD post test card Professional Version PTI8 is the 2011 latest computer repair tool, this professional version has all the advantages of Accurate PTI6, while it has upgraded the chip solution, adapting three-level menu , adding hundreds of diagnostic codes (from authoritative institution).
• REAL TIME MONITORING-PTI8 could offer real-time monitoring on the voltage, and the professional function like key monitoring.
• COMPATIBILITY-PTI8 is able to monitor most POST interface of most motherboard, and it is compatible with most of the popular motherboards?
• UNIQUE MutiPost TECHNOLOGY-Pti8 has MINIPCIE, MINIPCI, LPC these three interfaces of notebook PC, which makes it new generation.

• Intel Socket LGA 1700?Support 13th and 12th Gen Series Processors
• Unparalleled Performance?Hybrid 6+1+1 Phases Digital VRM Solution
• Dual Channel DDR4?2*DIMMs XMP Memory Module Support
• Next Generation Storage?2*PCIe 4.0 x4 M.2 Connectors
• EZ-Latch?PCIe 4.0x16 Slot with Quick Release Design
• Fast Networks?GbE LAN
• Extended Connectivity?HDMI, D-Sub
• Smart Fan 6?Features Multiple Temperature Sensors, Hybrid Fan Headers with FAN STOP

• The PoE HAT (Power Over Ethernet HAT) (Type C) for Raspberry Pi 3B+/4B,Standard Raspberry Pi 40PIN GPIO stackable header, allows connecting other HATs
• PoE (Power Over Ethernet) capability?IEEE 802.3af/at-compliant
• 5V USB-A & 12V header outputs. 5V USB-A provides up to 4A output (MAX 25W for 12V+5V total output power). be able to power extra device while providing stable power to Raspberry Pi.
• Onboard MP8676 buck chip. Incorporates original voltage buck chip. providing up to 4.5A output for Raspberry Pi and USB-A port.
• Onboard high speed active cooling fan, better heat dissipation

• Single-core ARM Cortex-A7 32-bit core with integrated NEON and FPU. Integrated with built-in POR, audio codec and MAC PHY
• Built-in Rockchip self-developed 4th generation NPU, features high computing precision and supports int4, int8, and int16 hybrid quantization. The computing power of int8 is 0.5 TOPS, and up to 1.0 TOPS with int4
• Built-in self-developed third-generation ISP3.2, supports 5-Megapixel, with multiple image enhancement and correction algorithms such as HDR, WDR, multi-level noise reduction, etc.
• Features powerful encoding performance, supports intelligent encoding mode and adaptive stream saving according to the scene, saves more than 50% bit rate of the conventional CBR mode so that the images from camera are high-definition with smaller size, double the storage space
• Built-in 16-bit DRAM DDR2, which is capable of sustaining demanding memory bandwidths

• Raspberry Pi Pico is Raspberry Pi's first microcontroller board, designed especially for physical computing
• It can be easily reprogrammed over USB from a Raspberry Pi or other computer using the C/C++ SDK or the official MicroPython port
• Pico 2 CH expander is an I/O expansion board designed for Raspberry Pi Pico
• It provides an easy and quick way to access all the GPIO pins of Raspberry Pi Pico
• Pico 2 Channel Expander is specifically made to work with the Raspberry Pi Pico Board

• Compatibility: blue and yellow, 0.96 inch OLED module is designed to display graphic information and text information directly on your microcontroller project; Compatible with Arduino Mega, Raspberry pi, 51 MCU, STIM 32, etc.
• Product information: resolution is 128 x 64; View angle is more than 160 degrees; Supporting voltage is from 3.3V to 5V DC; Power consumption during normal operation is 0.04W, full screen lit is 0.08W
• Driver and communication: embedded driver IC is SSD1306; Communication is IIC/ I2C interface, only needs 2 I/O ports; Compatible with MMDVM, Pi-Star, and compatible with Raspberry pi
• Self-luminous design: the OLED display module is self-luminous, so that no backlight is required; It features high contrast, bright and crisp dots, which is convenient for you to read tiny fonts
• Create fonts: there are no fonts embedded in the OLED controller, so users can use the font generation software to create the fonts

• Specifications: Arm 32-bit Cortex-M0+ Microprocessor (MCU): Up to 32 MHz max 16 KB Flash memory with ECC 2 KB RAM Connections: USB 3.1 (gen 1) port and cable (SuperSpeed, 5Gb/s transfer speed)
• Features: Google Edge TPU ML accelerator coprocessor, USB 3.0 Type-C socket, Supports Debian Linux on host CPU, Models are built using TensorFlow. Fully supports MobileNet and Inception architectures through custom architectures are possible. Compatible with Google Cloud.

Popular Categories on BuyBestBrands.in