Electronics Store - Computer Peripherals - Components - Motherboard

• On-board USB to TTL
• On-board Boot button and RST button
• On-board TYPE-C

• CPU: BCM2835 chip 1GHz ARM11 core, SDRAM: 512MB LPDDR2 SDRAM
• Mini HDMI-Compatible: Mini HDMI-Compatible interface X 1 supports 1080p 60Hz video output
• Micro USB power supply: Micro USB interface for power supply and data transmission
• USB On The Go: Micro On The Go X 1, GPIO: 40PIN GPIO interface X 1
• Wireless LAN: 802.11b/g/n, Bluetooth-Compatible: Bluetooth-Compatible 4.1

• Standalone Crypto Processor: The ASHATA 14Pin SPI TPM 2.0 Encryption Security Module is a standalone crypto processor that connects to the motherboard's daughter board. The TPM securely stores encryption keys that can be created using encryption software.
• Prevent Access: Without this key, the content on the user's PC remains encrypted and protected from unauthorized access.
• Supported Systems: Supports for 7 64 bit, for 8.1 32 64 bit, for 10 64 bit, actual performance may vary depending on your system configuration.
• Scope of Application: TPM2.0 encryption security module is suitable for for 11 motherboard. Some motherboards require a TPM module inserted or an update to the latest BIOS to enable the TPM option.
• Memory: Standard PC architecture reserves a certain amount of memory for system use, so the actual memory size will be less than the specified amount.

• Raspbery Pi 5 Model 8GB with a 64-bit quad-core Arm Cortex-A76 processor clocked at 2.4GHz.
• Impressive 2?3 increase in CPU performance compared to its predecessor, the Raspbery Pi 4B. It will perform best with active cooling.
• Delivers a substantial boost in graphics with its 800MHz VideoCore VII GPU, supports dual 4Kp60 display output via HDMI.
• You will need the latest version of RPi OS, Bookworm, for your latest Raspbery Pi 5.
• Note:- Recommended a high-quality 5V 5A USB-C power supply, such as the new Raspbery Pi 27W USB-C Power Supply.

• Non-stop action: The best choice for iCaf?, configure-to-order gaming systems and quality-driven businesses
• Non-stop durability: Unbeatable features including luminous anti-moisture coating, LANGuard, SafeSlot Core+, USBGuard, Stainless-steel back I/O and 5X Protection III
• Non-stop gaming: DDR4 5333 (OC), two M.2 slots, PCIe 4.0, Realtek 2.5 Gb Ethernet, ASUS Beyond VR ready and Epic audio
• Non-stop challenger: ASUS iCaf LAB-certified reboot and compatibility tested for diskless-system use, plus use with top games, 100+ peripherals, 1000+ CPUs, memory modules, graphics cards and more

• Intel LGA 1700 Socket: Designed for seamless compatibility with 12th Gen Intel Core processors.
• Advanced Power Design: Features a 6-phase commanding power design for enhanced stability and performance.
• High-Speed DDR4 Support: Supports DDR4 memory up to 3200MHz for efficient multitasking and responsiveness.
• Versatile Connectivity: Includes 1 PCIe 4.0 x16 slot, 2 PCIe 3.0 x1 slots, and multiple USB ports (4 USB 3.2 Gen1, 6 USB 2.0) for flexible peripheral integration.
• Graphics Output Options: Equipped with 2 HDMI 1.4 ports and 1 DP 1.4a port, offering multiple display connectivity options.
• Micro ATX Form Factor: Compact form factor suitable for smaller PC builds without compromising on features or performance.
• For Better Output and Performance of Motherboard Use always Branded HDMI Cables from Lenovo, Binary, Dell etc all Only

• Support: DDR4 High Performance Motherboard for standard & Gaming Desktops - H610 LGA1700 -12th/13th/14th Generation i3/i5/i7/i9 core Processors
• Product Note: True Gaming Affordable Motherboard by ALKETRON Computers for the latest Intel processors | Gaming BIOS with XMP settings
• Specifications: 1x M.2 WiFi Slot | 1x M.2 NVMe SSD Slot | 1x M.2 SATA SSD Slot | 3x SATA III SSD 6Gb/s Slots | 1x WiFi Connector | PCIe*16 slot | PCIe*1 Slot | 1x HDMI Port; 1x D-Sub(VGA) Port; 2x USB3.0 Ports; 4x USB2.0 Ports; 1x RJ45 LAN port; HD AudioJack
• Accessories: 1x SATA Cable; 1x I/O Rear Pannel; 1x User Manual with warranty card; 1x Driver CD
• Warranty Note: Free Technical & Installation support. After sales services available all over India, Contact ALKETRON Computers an Indian hardware start-up obsessed with Quality Engineering
• Form Factor: Micro-ATX(17cmx21cm) Architecture

• Single-core ARM Cortex-A7 32-bit core with integrated NEON and FPU. Integrated with built-in POR, audio codec and MAC PHY
• Built-in Rockchip self-developed 4th generation NPU, features high computing precision and supports int4, int8, and int16 hybrid quantization. The computing power of int8 is 0.5 TOPS, and up to 1.0 TOPS with int4
• Built-in self-developed third-generation ISP3.2, supports 5-Megapixel, with multiple image enhancement and correction algorithms such as HDR, WDR, multi-level noise reduction, etc.
• Features powerful encoding performance, supports intelligent encoding mode and adaptive stream saving according to the scene, saves more than 50% bit rate of the conventional CBR mode so that the images from camera are high-definition with smaller size, double the storage space
• Built-in 16-bit DRAM DDR2, which is capable of sustaining demanding memory bandwidths

• Single-core ARM Cortex-A7 32-bit core with integrated NEON and FPU. Integrated with built-in POR, audio codec and MAC PHY
• Built-in Rockchip self-developed 4th generation NPU, features high computing precision and supports int4, int8, and int16 hybrid quantization. The computing power of int8 is 0.5 TOPS, and up to 1.0 TOPS with int4
• Built-in self-developed third-generation ISP3.2, supports 5-Megapixel, with multiple image enhancement and correction algorithms such as HDR, WDR, multi-level noise reduction, etc.
• Features powerful encoding performance, supports intelligent encoding mode and adaptive stream saving according to the scene, saves more than 50% bit rate of the conventional CBR mode so that the images from camera are high-definition with smaller size, double the storage space
• Built-in 16-bit DRAM DDR2, which is capable of sustaining demanding memory bandwidths

• Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
• 264KB of SRAM, and 4MB of onboard Flash memory. Onboard CH9120 with integrated TCP/IP protocol stack
• 14 multi-function GPIO pins, compatible with some Pico HATs. Castellated module allows soldering direct to carrier boards
• Drag-and-drop programming using mass storage over USB. Temperature sensor
• 8 Programmable I/O (PIO) state machines for custom peripheral support

• Product Features: Equipped with ESP32-C3-MINI-1 module Easy to use and flexible to expand Most of the pins of the module on the board have been led out to the pin headers on both sides Easily connect a variety of peripherals via jumpers Very low power SoC with RISC-V 32-bit single-core processor Supports IEEE 802.11b/g/n (2.4 GHz Wi-Fi) and Bluetooth 5 (LE) The ESP32-C3 series chips with ultra-low power consumption are designed for Internet of Things (IoT) devices
• Wi-Fi Features: .Support IEEE 802.11 b/g/n protocol .Supports 20 MHz and 40 MHz bandwidths in the 2.4 GHz band .Support 1T1R mode, data rate up to 150 Mbps .4x virtual Wi-Fi interface .Support Infrastructure BSS Station mode, SoftAP mode, Station + SoftAP mode, and Promiscuous mode at the same time Please note that when the ESP32-C3 series chip scans in Station mode, the SoftAP channel will change at the same time .Antenna Diversity .802.11 mc FTM .Support external power amplifier
• Application areas include: Smart Home: Smart Lighting Industrial automation: industrial robots, mesh networking, human-machine interface, industrial bus applications Consumer electronics: smart watches, smart bracelets, OTT TV boxes, set-top box devices Wi-Fi speaker Smart agriculture: smart greenhouses, smart irrigation, agricultural robots Retail catering: POS systems Audio equipment: Network music player Universal low-power IoT sensor hub Universal low-power IoT data logger
• Power Options: You can choose one of the following three power supply methods to power the ESP32-C3-DevKitM-1: ?Micro-USB interface power supply (default) ?5V and GND pin header power supply. ?3V3 and GND pin header power supply It is recommended to choose the first power supply method: Micro-USB interface power supply.
• Required Hardware: ESP32-C3-DevKitM-1 development board USB 2.0 data cable (standard type A to Micro-B type) Computer (Windows, Linux, or macOS)

• Features: ESP32-C3-DevKitC-02 has 4 MB SPI Flash and full Wi-Fi and Bluetooth LE functionality
• Module: A standard ESP32-C3-WROOM-02 module is soldered on the ESP32-C3-DevKitM-02 board
• USB-UART bridge: Single USB-UART bridge chip provides transfer rates is 3 Mbps
• RGB LED: Driven by GPIO8, Addressable RGB LED
• How to email us Please click ?Wishiot?(you can find \"Sold by Wishiot\" under Buy Now button), in the new page, click ?Ask a question to email us

• Raspberry Pi 4 Model B (RPi 4B) has high-performance 64-bit Quad-Core 1.5 GHz Processor which provides desktop performance comparable to entry-level x86 PC systems.
• On-board dual-band 2.4/5.0 GHz Wi-Fi and 5.0 Bluetooth Connectivity supports dual 4K output, video decode at upto 4Kp60, USB 3.0, and PoE capability.
• Operating Power 5V 3A 15W via USB Type-C port. OpenGL ES, 3.0 graphics. Micro SD card slot for loading operating system and data storage.
• Applications- Embedded Design & Development, Hobby & Education, IoT (Internet of Things), Communications & Networking.
• Warranty- 1 Year Manufacturer Warranty (For RPi Board Only). Includes Manufacturing Defects only.

• Brilliant 3D graphics
• 4GB eMMC on-board flash storage
• Contains USB interface

• The HUZZAH32 is our ESP32-based Feather, made with the official WROOM32 module
• This version of the ESP32 Feather comes with plain 0.1\" headers already soldered in so its ready for instant gratification and Feather fun!
• Please note: The ESP32 is still targeted to developers. Not all of the peripherals are fully documented with example code, and there are some bugs still being found and fixed.
• Comes fully assembled and tested, with a USB interface that lets you quickly use it with the Arduino IDE or the low-level ESP32 IDF. Lipoly battery and USB cable not included (but we do have lots of o
• Product Dimensions: 50.0mm x 23.0mm x 15.6mm / 2.0\" x 0.9\" x 0.6\" Product Weight: 8.4g / 0.3oz

• WIDE COMPATIBILITYHas strong compatibility, perfectly compatible with all versions of for .
• HD PICTURE3.5inch standard display, 480x320 resolution, offering you clear and vivid image.
• TOUCHWith resistive for touch control, more convenient and practical.
• SPECIFICATIONSThis display is built to meet standard specification, strictly follow factory quality control.
• APPLICATIONSuitable for the motherboard of for Raspberry Pi 4B/3B+/3B/2B. When using it, you need to download the official system of for Raspberry Pi.

Popular Categories on BuyBestBrands.in