Electronics Store - Computer Peripherals - Components - Motherboard

• Onboard 4M crystal oscillator, the socket crystal frequency can be replaced at any time.
• The 4-bit independent keyboard is connected to RB0 RB1 RB2 RB3. External 5V DC power interface (send USB power cable without additional purchase).
• 8 LEDs are connected to the RD port. When the J3 is plugged in, the LED is enabled. J3 is unplugged and the RD port is completely released.
• Standard RS232 communication interface, microcontroller board and computer communication interface. ICSP programming simulation interface (can be connected to K150 PICKIT2 PICKIT3 ICD2 and other tools).
• VCC GND pin header power extension interface for access or -out of 5 volt power supplies. All IO ports of the MCU are easily extended by using pin headers.

• RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
• 264KB of SRAM, and 2MB of on-board Flash memory. USB-C connector, keeps it up to date, easier to use
• Castellated module allows soldering direct to carrier boards. USB 1.1 with device and host support. Low-power sleep and dormant modes
• Drag-and-drop programming using mass storage over USB. 29 multi-function GPIO pins (20 via edge pinout, others via solder points). 2 SPI, 2 I2C, 2 UART, 4 12-bit ADC, 16 controllable PWM channels
• Accurate clock and timer on-chip Temperature sensor. Accelerated floating-point libraries on-chip. 8 Programmable I/O (PIO) state machines for custom peripheral support

• RP2040-Zero Mini Version board, Pico-Like MCU Board Based on Raspberry Pi MCU RP2040, Castellated module, suitable for SMD applications.
• RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz. Onboard 264KB of SRAM, and 2MB Flash memory. Type-C USB Connector, keeps it up to date, easier to use.
• Castellated module allows soldering direct to carrier boards. USB 1.1 with device and host support. Low-power sleep and dormant mode.
• Drag-and-drop programming using mass storage over USB. 29 multi-function GPIO pins (20 via edge pinout, others via solder points). 2 SPI, 2 I2C, 2 UART, 4 12-bit ADC, 16 controllable PWM channels.
• Accurate clock and timer on-chip. Temperature sensor. Accelerated floating-point libraries on-chip. 8 Programmable I/O (PIO) state machines for custom peripheral support . Support C/C++?MicroPython. Development Resources/User Manual: www.waveshare.com/wiki/RP2040-Zero?Amazon

• GeeekPi Mini Tower Kit is designed for Raspberry Pi 5 8GB 4GB. Note: This Mini Tower case isn't compatible with N07 PCIe M.2 M-Key NVMe SSD PCIe Peripheral Bottom Board. For N07 NAS Kit, please refer to ASIN B0DDXJFMLF
• ABS Mini Tower Case is made of ABS material, with very high precision, and the 45-degree OLED screen display angle is more convenient to observe system information. The screen holder adopts a quick-release design, and the interior of the shell includes a design for arranging cables, which is convenient for arranging cables.
• The interface adopts With a fool-proof design to avoid problems caused by wrong wiring, the installation is simpler and more convenient.
• The screen driver board contains RGB three-color programmable LED ambient light, which can better render the light color according to your own needs.
• The ice tower radiator included in the kit can not only provide good heat dissipation, but also increase the appearance.
• Package Includes: 1 x ABS Mini Tower Case, 2 x Acrylic side panel,1 x 0.96 inch OLED Display(already mounted on the case ), 1 x ICE Tower Cooler, 1x GPIO Edge Extention,1x Assembly Manual (Note: Raspberry Pi 5 board is Not included in the package)

• ATmega32U4 running at 5V/16MHz
• Supported by IDE v1.0.1
• Rx and Tx Hardware Serial Connection
• 4 x 10-bit ADC pins, 12 x Digital I/Os
• On-Board Type-C connector for programming

• OLED screen, internal drive chip: SSD1306, high resolution: 128X64 (and 12864LCD the same resolution, but the OLED screen more pixels per unit area), super wide viewing angle: more than 160 (maximum viewing angle display a screen).
• 0.96 OLED widely supply range: DC 3V-5V (without any changes, directly compatible with common 3.3V and 5V power supply system), ultra-low power consumption.
• 12864 oled 7 pin support for multiple operating modes: 3-wire SPI, 4 wire SPI, IIC.
• 0.96 inch SPI OLED display module low operating voltage and power consumption, self-emitting light,with chip select CS signal, you can achieve multiple SPI or IIC device on the same bus work.
• 0.96\" OLED module supports many control chip : Fully compatible with 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.

• ESP32-S3-DevKitC-1-N8R2 ESP32-S3 Development Board Wi-Fi + BLE MCU Module
• ESP32-S3 is a MCU chip integrated with 2.4 GHz Wi Fi and Bluetooth 5 (LE), which supports Long Range mode.
• 5V and G (GND) pins;3V3 and G (GND) pins
• USB-to-UART Port and ESP32-S3 USB Port (either one or both), default power supply (recommended)
• ESP32-S3-WROOM-1-N8R2(8M Flash/2SRAM);The cable can be used: USB Type A to Type-C cable or CC cable Note the distinction between the commonly used USB A port to Type-C cable that can only be charged, which cannot be used for communication between YD-ESP32-S3 and the host.

• Support for the Arduino IDE 1.0+ (OSX/Win/Linux)
• Power via USB or External Source - 5v or 7-35v (automatic selection)
• On-board 500ma 5V Regulator,Built-in USB (and serial debugging)
• 6 I/O Pins (2 are used for USB only if your program actively communicates over USB
• Package Includes: 1PCS Attiny85 USB Board

• Adds a USB 3.0 200MB/s high speed interface to your Alchitry board stack via the USB-C connector.
• For use with projects that require data transfer rates greater than standard on board USB to serial 12Mbaud
• 200 Mbps* ~ 191 Mbaud* - Note: this is not exact and depends on how you are using the Dev board in conjunction with the FT element board.
• The Ft Element is equipped with four 50-pin board to board connectors on the underside and top of the board that snap to the Alchitry Au and Au(+) boards.
• Please note that this board is only functional with the higher end Au & Au+ FPGA Dev boards that feature the Xilinx Artix 7.

• 100% Brand new and high quality.
• This product are tested before shipping.
• Please make sure you are buying from GinTai.
• Special skill and techniques required for proper installation.
• Easy for you replace your faulty,cracked or broken one ,seller remind that you should replace this in the off state.

• Adds M.2 SATA SSD Compatibility to your Raspberry Pi 4. These expansion boards only work with Argon ONE Raspberry Pi 4 Case, which are sold separately.

• 2\" LCD Display Module for Raspberry Pi Pico, onboard female pin header for direct attaching to Raspberry Pi Pico
• 320?240 resolution, IPS screen, 65K RGB colors, clear and colorful displaying effect
• Embedded ST7789VW Driver, Using SPI Bus, SPI interface, requires minimal IO pins
• 4x user buttons for easy interacting
• Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)

• Unlike traditional motherboards that use analog power, this motherboard uses a next generation digital PWM (Pulse-Width Modulation) design, which provides CPU Vcore voltage more efficiently and smoothly, so that the stability and lifespan of the motherboard is greatly enhanced.
• The PCIe Gen3 x4 Ultra M.2 interface pushes data transfer speeds up to 32Gb/s. In addition, it also supports SATA3 6Gb/s M.2 modules.
• Intel LAN provides the best throughput performance, lower CPU utilization, enhanced stability and is able to deliver ultimate network experience to users!
• Besides the onboard LAN port, users may also choose 802.11ac wireless connections by M.2 (Key E) slot.
• Pure black PCB appearance. The new Sapphire Black PCB represents rock-solid quality and gives the motherboard a more mysterious touch.

• Quality materials and easy installationTPM 2.0 Security Module is made of high quality material and is well made for long life.It is easy to install, lightweight and compact, and its easy integration makes it a breeze to install and operate quickly.
• Working environmentThe TPM2.0 Security Module is compatible with GC-TPM2.0_S. Interface: LPC, TPM IC: SLB9665, Pin Connector: 12Pin.Please check compatibility before purchasing.
• Reliable WorkThe TPM 2.0 Module is a highly reliable cryptographic processor that brings an extra layer of security to your Windows computer. With its advanced encryption technology, you can perform secure operations such as generating, storing, and restricting the use of cryptographic keys, ensuring that your system is protected from unauthorized access.
• High-quality replacementhigh-quality professional use, the function is the same as the original model, stable performance, a good replacement of the original damaged old safety module.
• Model SupportEach security module is tested before it leaves the factory and is 100% perfectly works well.Therefore, Please confirm that your motherboard supports TPM2.0 technology.

• BIGTREETECH Pi4B Control Board

• CHIPSET: NT68676(UFG)
• MARKET AREA :Asia-Pacific
• OSD LANGUAGE: Simplified chinese, Traditional chIese, English, French, German, Italian, Spanish, Portuguese, Japanese, Korean (optional)
• KEY FUNCTION : POWER, MENU, VOL+, VOL-, ADJUST/EXIT

Popular Categories on BuyBestBrands.in